Digital Equipment 3220 Series Manuel utilisateur

DIGITAL

™Server 3220/3220R Series

Installation Guide

Installationshandbuch

Guía de instalación

Guide d’installation

Guida di installazione

™

DIGITAL Server 3220/3220R Series2

hank ou

... for purchasing a DIGITAL Server 3220/3220R.

The DIGITAL Server family represents DIGITAL’s

continued commitment to Uncompromising

Quality, backed by award-winning Customer

Service and Support. The following procedures

will help you easily set up your server’s

hardware and software.

Before You Begin

Select a suitable area for server and rack assembly and

use. Ensure that the location:

■ Is free from excessive heat, dust, and direct sunlight

■ Allows at least 30 inches of clearance at the rear of

the rack and 60 inches at the front of the rack for

rack models

■ Allows at least 7 inches of clearance on all sides for

proper air flow around pedestal models

■ Is in accordance with local and regional electrical

regulations governing the installation of Information

Technology Equipment by licensed electricians

See “Technical Specifications” in your System Reference

manual for temperature and humidity information.

If you do not wish to install the server yourself, contact

your DIGITAL authorized service provider. A Customer

Service Technician can install the server for you.

WARNING

Use extreme care when unpacking your server.

Due to its weight, two people are required to

unpack it. Failure to use two people might violate

certain safety regulations and can result in severe

personal injury or equipment damage.

DIGITAL ServerWORKS Quick Launch

DIGITAL ServerWORKS Quick Launch delivers

unparalleled achievement in streamlining the instal-

lation and configuration of hardware components

and network operating system software on the

DIGITAL Server line of products. Quick Launch

combines an intuitive interface and versatile, time

saving features to produce a consistent and accurate

installation optimized for DIGITAL’s extremely pow-

erful and highly acclaimed DIGITAL Servers.

In addition to its automated yet extensible method

of express installations for Network Operating

Systems, Quick Launch provides a comprehensive

archive of server documentation, troubleshooting

assistance, configuration utilities, and diagnostics.

Installation Guide

ENGLISH

Unpack your server

Unpacking Instructions

Pedestal Model (shown above)

1. Tip the box on its side. Open the bottom of the box

and fold the bottom flap under the box.

2. While still in the box, set the server upright.

3. Open the top of the box and remove the country kit.

4. Close the top of the box. Using the handles on the box,

remove it from the top of the server.

5. Move the server to your desired location. Tip the

server slightly and rotate the four pedestal feet out-

ward until they lock into position.

Rackmount Model

Unpack your server following the diagrams on the box

top. Use a mechanical aid or get someone to help you lift

it from the carton base.

If you need to lift the server…

1. Get close to the server.

2. Squat down with your knees bent and your feet apart

for stable footing.

3. Lift with your legs, keeping your back straight.

4. Avoid twisting your upper body. Move your feet to turn.

5. Lower the server gently using your leg muscles to squat

while keeping your back straight.

After your server has been unpacked, please recycle the

packing materials or dispose of them properly.

WARNING

The server is heavy. Do not lift it alone.

DIGITAL Server 3220/3220R Series4

Check the parts

Unpack and identify your server’s components.

Pedestal Model

Power cord

Server keys

Optional 68-pin SCSI cable for connecting the

SCSI channel 2 to an exterior port and terminator

Server software and documentation kits including

printed manuals and the Quick Launch CD-ROM with

on-line documentation

Hot swap drive extraction tool

NOTE

A rack, monitor, and a country kit including a keyboard,

keyboard extension cable, and mouse must be ordered

separately for either server model.

A power cord is included in the country kit for the pedes-

tal model but must be ordered separately for the rack-

mount model.

Rackmount Model

Cable management arm and brackets

Slides (2) and mounting hardware

Optional 68-pin SCSI cable for connecting the

SCSI channel 2 to an exterior port

Server software and documentation kits including

printed manuals and the Quick Launch CD-ROM with

on-line documentation

The DIGITAL ServerWORKS software kit includes:

■ ServerWORKS Quick Launch: ServerWORKS Quick

Launch CD-ROM software and Getting Started guide.

■ ServerWORKS Manager kit: ServerWORKS Manager

software and documentation.

The DIGITAL Server Documentation kit includes:

■ This Installation Guide, System Reference manual,

Documentation Overview, Warranty and Service

Information, and Registration Card.

Installation Guide

ENGLISH

Install any internal options

If you have options to install, install them now. To install

internal options:

CAUTION

Before touching any circuit board or component,

wear an anti-static wrist strap, properly grounded

to the server chassis, or touch the metal frame to

discharge any static electricity.

Pedestal Model

1. Unlock the door and front bezel.

2. Open the front bezel and loosen the two

side panel thumbscrews.

3. Remove the side panel.

4. Install the options.

Rackmount Model

1. Remove the front bezel.

2. Remove the screw and then remove the top cover.

3. Install the options.

Refer to the System Reference manual for detailed infor-

mation. Also, refer to the documentation that came with

the option kit for specific installation instructions.

DIGITAL Server 3220/3220R Series6

Install your server in the rack (3220R only)

1. Mark the installation area. Allow 128 cm (50 in.) for

installation.

NOTE

On a DIGITAL rackmount, each 14U rail is marked at 1U

increments.

2. If needed, attach the mounting angles to the rack.

CAUTION

Mounting angles must be tightened to a torque

value of 4.2 N-m (3.1 ft-lbs).

Installation Guide 7

ENGLISH

Rack installation continued

3. Assemble the front of the slide mounting brackets

(front view).

4. Assemble the back of the slide mounting brackets.

5. Attach the slide mounting brackets to the rack.

NOTE

On a DIGITAL rackmount, the chassis slide must be fas-

tened 50.8 mm (2 in.) behind the front rail to ensure

proper door clearance.

DIGITAL Server 3220/3220R Series8

Rack installation continued

6. Attach the slide rails to the server.

7. Install the server into the rack.

WARNING

Use two people to lift the server.

8. Attach the cable management arm.

Installation Guide

ENGLISH

Connect the cables and power cord

1. Connect the keyboard.

2. Connect the mouse.

3. Connect the monitor.

4. Connect the 10/100Base-T network cable.

5. Connect ac power.

For more information on connecting server cables for the

model 3200R, refer to the DIGITAL Server Rackmount

Installation Guide.

CAUTION

The voltage selection switch must match the

voltage supplied by your power outlet. In North

America, 115 volts is common. In other countries,

230 volts is common. Ensure that the voltage

selection switch is set to the correct voltage. If it

is not set correctly, you can damage your server.

Do not attempt to modify or use an external

100 Vac (Japan only) or 115 Vac power cord for

240 Vac input power. Modifying either cord can

cause severe equipment damage.

DIGITAL Server 3220/3220R Series10

Turn on the monitor and then the server

1. Turn on the monitor.

2. Turn on the server.

3. Adjust the monitor’s contrast and brightness to obtain

a readable screen display.

NOTE

Refer to your System Reference manual for BIOS and

Power-On-Self-Test (POST) messages.

Autres manuels pour 3220 Series

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Digital Equipment Serveur

Digital Equipment

Digital Equipment 7300 Manuel utilisateur

Digital Equipment

Digital Equipment DEC 10000 Manuel utilisateur

Digital Equipment

Digital Equipment 3100R Series Manuel utilisateur

Digital Equipment

Digital Equipment Prioris MX 6200 Manuel utilisateur

Digital Equipment

Digital Equipment Prioris HX 6000 Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS HX Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 90M Manuel utilisateur

Digital Equipment

Digital Equipment 5200 Series Manuel utilisateur

Digital Equipment

Digital Equipment DEC 3000 Instructions d'utilisation et d'installation

Digital Equipment

Digital Equipment PRIORIS ZX 6000 MP SERIES Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 700-08 Manuel utilisateur

Digital Equipment

Digital Equipment MicroVAX 3600 Mode d’emploi

Digital Equipment

Digital Equipment 3300R Manuel utilisateur

Digital Equipment

Digital Equipment 7100R Series Manuel utilisateur

Digital Equipment

Digital Equipment 7100R Series Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS ZX MP5 Manuel utilisateur

Digital Equipment

Digital Equipment AlphaServer 1000 Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 900MC Instructions d'utilisation et d'entretien

Digital Equipment

Digital Equipment MicroVAX II 630QB Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS ZX Manuel utilisateur

Digital Equipment

Digital Equipment MUXserver 100 Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 90L+ Manuel utilisateur

Digital Equipment

Digital Equipment MicroVAX II 630QB Manuel utilisateur

Digital Equipment

Digital Equipment Prioris HX590 DP Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur