Digital Equipment 3220 Series Guide de l'utilisateur

DIGITAL Server 3220/3220R Series

System Reference

Part Number: ER-B4BWW-UA. A01

Digital Equipment Corporation

June 1998

The information in this document is subject to change without notice and should not

be construed as a commitment by Digital Equipment Corporation.

Digital Equipment Corporation assumes no responsibility for any errors that might

appear in this document.

The software, if any, described in this document is furnished under a license and may

be used or copied only in accordance with the terms of such license. No responsibility

is assumed for the use or reliability of software or equipment that is not supplied by

Digital Equipment Corporation or its affiliated companies.

Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject

to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data

and Computer Software clause at DFARS 252.227-7013.

DIGITAL Server 3220/3220R Series System Reference

AMI is a registered trademark of American Megatrends, Inc.

DEC, DIGITAL, ServerWORKS, and the DIGITALlogo are trademarks of Digital

Equipment Corporation.

Intel, MMX and Pentium II are registered trademarks of Intel Corporation.

Microsoft, Windows NT, and Windows 95 are registered trademarks of Microsoft

Corporation.

Novell and NetWare are U.S. registered trademarks of Novell Inc.

OS/2 and PS/2 are registered trademarks of International Business Machines

Corporation.

PhoenixBIOS is a trademark of Phoenix Technologies Ltd.

SCO UNIX is a trademark of The Santa Cruz Operation, Inc.

Symbios is a trademark of Symbios, Inc.

UNIX is a registered trademark of The Open Group.

All other trademarks and registered trademarks are the property of their respective

holders.

Regulatory Compliance Statements

The following statements of compliance are required by the respective governmental

regulatory agencies.

DIGITAL Server 3220R (Rackmount Model)

FCC Notice — U.S.A.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference, in which case, the user will be required to correct the interference at his

own expense.

CAUTION: Any changes or modifications to this device, which

are not identified in this manual, could cause harmful

interference and void the user’s authority to operate this device.

CSA — Canada

This digital apparatus does not exceed the Class A limits for radio noise emissions

established in the radio interference regulations of the Canadian Department of

Communications.

VCCI — Japan

This equipment is in the Class I category (information equipment to be used in

commercial and/or industrial areas) and conforms to the standards set by the

Voluntary Control Council for Interference (VCCI) by Data Processing Equipment and

Electronic Office Machines aimed at preventing radio interference in commercial

and/or industrial areas.

Consequently, when used in a residential area or in an adjacent area thereto, radio

interference may be caused to radio and TV receivers, etc.

Read the instructions for correct handling.

DIGITAL Server 3220 (Pedestal Model)

FCC Notice — U.S.A.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

All external cables connecting to this basic unit need to be shielded. For cables

connecting to option boards, see the option manual or installation instructions.

CSA — Canada

This digital apparatus does not exceed the Class B limits for radio noise emissions

established in the radio interference regulations of the Canadian Department of

Communications.

VCCI — Japan

This equipment is a Class II product based on the standard of the Voluntary Control

Council for Interference Technology Equipment (VCCI). If it is used near a radio or

television receiver in a domestic environment, it may cause radio interference. Install

and use the equipment according to the instruction manual.

DIGITAL Server 3220/3220R

Ergonomics — Germany

This equipment meets or exceeds the ergonomic requirements of ZH1/618, TÜV,

Rheinland, Germany.

Safety Requirements

This equipment meets or exceeds safety requirements in the U.S. (UL 1950),

Canada (CSA C22.2 No. 950), and Europe (IEC 950 and TÜV EN60950/A3: 1995).

The product is certified to bear the GS-Mark (Geprüfte Sicherheit) and CB

certification.

Laser Safety Notice

All CD-ROM drives included in DIGITAL computers are classified as Class 1 laser

products and comply with safety standards as set by U.S. government and applicable

European agencies.

No hazardous radiation is emitted from this CD-ROM drive; the laser beam is

completely enclosed in the CD-ROM subassembly during all customer operation and

maintenance. In the event that repair or service of the CD-ROM subassembly is

required, only authorized DIGITAL service personnel should perform such repairs.

Contents

Preface

Introduction..................................................................................................... ix

Audience......................................................................................................... ix

Support Information......................................................................................... x

Organization.................................................................................................... xi

Conventions.................................................................................................... xiii

Abbreviations .................................................................................................. xiv

Special Notices................................................................................................ xvii

Introduction

Reliability/Availability........................................................................................ 1-1

Server Expansion............................................................................................ 1-2

Server Management and Security.................................................................... 1-3

Server Software and Documentation ............................................................... 1-4

Diagnostic Software......................................................................................... 1-5

Server Utilities and Technical Support.............................................................. 1-6

Server Software and Utilities

Introduction..................................................................................................... 2-1

ServerWORKS Quick Launch.......................................................................... 2-2

BIOS Setup Utility............................................................................................ 2-2

Accessing the BIOS Setup Utility.............................................................. 2-4

Helpful Hints............................................................................................. 2-5

Changing Your Server’s Configuration............................................................. 2-6

Changing Time and Date.......................................................................... 2-6

Changing I/O Port Settings....................................................................... 2-7

Contents

Assigning IRQs ............................................................................................... 2-8

Advanced................................................................................................. 2-8

Setting Up Security................................................................................... 2-9

Changing the Boot Sequence ................................................................... 2-13

Speeding up the Boot Process.................................................................. 2-13

Checking System Management Parameters ............................................. 2-15

BIOS Upgrade Utility ....................................................................................... 2-15

SCSI Configuration Utility ................................................................................ 2-17

Determining Devices Attached to Each SCSI Channel............................... 2-18

RAID Configuration Utility................................................................................ 2-19

Diagnostics ..................................................................................................... 2-19

Server Components

Introduction..................................................................................................... 3-1

Disconnecting External Devices and Power ..................................................... 3-1

Unlocking the Server (Model 3220).................................................................. 3-2

Keylock Function...................................................................................... 3-2

Removing the Front Bezel............................................................................... 3-2

Removing and Installing the Side Panel (Model 3220)...................................... 3-4

Removing the Server from the Rack (Model 3220R)........................................ 3-6

Removing and Installing the Top Cover (Model 3220R).................................... 3-8

Front View....................................................................................................... 3-12

Internal View................................................................................................... 3-14

Rear View ....................................................................................................... 3-16

Main Logic Board Connectors.......................................................................... 3-18

Main Logic Board Components........................................................................ 3-20

Processor Module Components....................................................................... 3-22

Video/Ethernet Daughter Card Connectors and Indicators ............................... 3-24

Tools Needed.................................................................................................. 3-25

Static Electricity............................................................................................... 3-25

Replacing the Real Time Clock (RTC) Battery.................................................. 3-26

Contents

iii

Server Management

Introduction..................................................................................................... 4-1

Managing Your Server..................................................................................... 4-1

Obtaining Information about Your Server......................................................... 4-2

Obtaining Information Using the BIOS Setup Utility................................... 4-4

Obtaining Information Using Server Management Software....................... 4-4

Displaying Server Status Using the Hardware.................................................. 4-6

Processor Upgrades

Introduction..................................................................................................... 5-1

Processor Configuration Guidelines................................................................. 5-1

Removing the Processor Module..................................................................... 5-2

Removing the Terminator Card........................................................................ 5-4

Installing a Second Processor.......................................................................... 5-5

Installing the Processor Module....................................................................... 5-6

Run the System ID Configuration Utility ........................................................... 5-8

Installing Additional Memory

Introduction..................................................................................................... 6-1

Server DIMM Requirements............................................................................ 6-2

Memory Configuration Guidelines.................................................................... 6-2

Memory Configurations............................................................................. 6-4

Installing DIMMs on the Processor Module...................................................... 6-5

Memory Troubleshooting................................................................................. 6-8

Contents

SCSI Device Configurations

Introduction..................................................................................................... 7-1

Storage Configuration Guidelines .................................................................... 7-1

SCSI Configuration Guidelines......................................................................... 7-2

Tape Drive Configuration Guidelines................................................................ 7-3

Hot Swap Drive Configuration Guidelines......................................................... 7-4

SCSI IDs (Model 3220R) .......................................................................... 7-6

RAID Configuration Guidelines ........................................................................ 7-7

Cables...................................................................................................... 7-8

Installing Storage Devices (DIGITAL Server 3220)

Introduction..................................................................................................... 8-1

Installing a Half-Height 5¼-Inch Device into the Top Drive Bay.................. 8-1

Installing a Full-Height 5¼-Inch Device into the Top Drive Bay.................. 8-4

Hot-Swap Drive Bay ................................................................................. 8-7

Installing the External Wide SCSI Cable Assembly........................................... 8-10

Connecting an External SCSI Storage Box ...................................................... 8-12

Installing Storage Devices (DIGITAL Server 3220R)

Introduction..................................................................................................... 9-1

Installing a Half-Height 5¼-Inch Device

into the Front Access Drive Bay........................................................... 9-2

Installing a Full-Height 5¼-Inch Device

into the Front Access Drive Bay........................................................... 9-6

Hot-Swap Drive Bay ................................................................................. 9-8

Connecting the External Wide SCSI Cable Assembly....................................... 9-14

Contents

Installing Expansion Boards

Introduction..................................................................................................... 10-1

ISA Expansion Board Configuration Guidelines................................................ 10-1

PCI Expansion Board Configuration Guidelines................................................ 10-3

Configuring PCI Expansion Boards Using the BIOS Setup Utility...................... 10-4

Boot Devices............................................................................................ 10-4

Server Boot Sequence.............................................................................. 10-5

Server Scan Sequence............................................................................. 10-6

PCI Scan Sequence ................................................................................. 10-7

Installing Expansion Boards............................................................................. 10-9

Connecting SCSI and RAID Devices

Introduction..................................................................................................... 11-1

SCSI Cable Configurations.............................................................................. 11-1

Wide Ultra SCSI Cable Configuration........................................................ 11-1

RAID Cable Configuration................................................................................ 11-4

Server Security Features

Introduction..................................................................................................... 12-1

Hold-Down Bar (Model 3220)........................................................................... 12-2

Front-Access Security Door and Front Bezel Lock (Model 3220)...................... 12-3

Supervisor Password....................................................................................... 12-4

If You Forget Your Password........................................................................... 12-4

Additional Security Features............................................................................ 12-5

Autres manuels pour 3220 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digital Equipment Serveur

Digital Equipment

Digital Equipment Digital AlphaServer 400 Series Manuel d'utilisation

Digital Equipment

Digital Equipment DEC 10000 Manuel utilisateur

Digital Equipment

Digital Equipment DECmpp 12000/Sx 100 Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 700-08 Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 300 Manuel

Digital Equipment

Digital Equipment Prioris Series Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS ZX 5000 MP Manuel utilisateur

Digital Equipment

Digital Equipment AlphaServer 1000 Manuel utilisateur

Digital Equipment

Digital Equipment AlphaServer 1000 Guide de démarrage rapide

Digital Equipment

Digital Equipment Prioris XL 6000 Series Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 900MC Instructions d'utilisation et d'entretien

Digital Equipment

Digital Equipment DIGITAL Server 7100 1200 Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS HX Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 90TL Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 200 Manuel utilisateur

Digital Equipment

Digital Equipment 3100R Series Manuel utilisateur

Digital Equipment

Digital Equipment PRIORIS MTE Manuel utilisateur

Digital Equipment

Digital Equipment AlphaServer 2000 Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 900TM Manuel utilisateur

Digital Equipment

Digital Equipment DECserver 300 Feuille d'instructions

Digital Equipment

Digital Equipment AlphaServer 800 Manuel utilisateur

Digital Equipment

Digital Equipment 3300R Manuel utilisateur

Digital Equipment

Digital Equipment 7100R Series Manuel utilisateur

Digital Equipment

Digital Equipment AlphaServer 4000 Guide rapide

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur