Digital Equipment VAX 10000 Guide de configuration
digital equipment corporation
maynard, massachusetts
VAX 10000
Advanced Troubleshooting
Order Number EK–1001A–TS.001
This manual is intended for Digital customer service engineers and self-
maintenance customers. It covers system troubleshooting information.
First Printing, February 1993
The information in this document is subject to change without notice and should
not be construed as a commitment by Digital Equipment Corporation.
Digital Equipment Corporation assumes no responsibility for any errors that may
appear in this document.
The software, if any, described in this document is furnished under a license and
may be used or copied only in accordance with the terms of such license. No re-
sponsibility is assumed for the use or reliability of software or equipment that is
not supplied by Digital Equipment Corporation or its affiliated companies.
Copyright © 1993 by Digital Equipment Corporation.
All Rights Reserved.
Printed in U.S.A.
The following are trademarks of Digital Equipment Corporation:
Alpha AXP DECUS VAXBI
AXP DWMVA VAXELN
DEC OpenVMS VMScluster
DECchip ULTRIX XMI
DEC LANcontroller UNIBUS The AXP logo
DECnet VAX
d
T
OSF/1 is a registered trademark of the Open Software Foundation, Inc.
FCC NOTICE: The equipment described in this manual generates, uses, and may
emit radio frequency energy. The equipment has been type tested and found to
comply with the limits for a Class A computing device pursuant to Subpart J of
Part 15 of FCC Rules, which are designed to provide reasonable protection against
such radio frequency interference when operated in a commercial environment.
Operation of this equipment in a residential area may cause interference, in which
case the user at his own expense may be required to take measures to correct the
interference.
iii
Contents
Preface ..................................................................................................... vii
Chapter 1 Troubleshooting During Power-Up
1.1 Power System Overview ........................................................ 1-2
1.2 Power-Up Troubleshooting Flowchart .................................. 1-4
1.3 AC Input Box.......................................................................... 1-6
1.4 H7263 Power Regulators ....................................................... 1-8
1.5 Cabinet Control Logic Module............................................. 1-10
1.6 Control Panel........................................................................ 1-12
1.7 Blower................................................................................... 1-14
1.8 XMI Plug-In Unit ................................................................. 1-16
1.9 Troubleshooting the XMI Plug-In Unit............................... 1-18
Chapter 2 System Self-Test
2.1 System Self-Test Overview.................................................... 2-2
2.2 Power-Up Sequence ............................................................... 2-4
2.3 System Self-Test Results ..................................................... 2-10
2.4 Checking Self-Test Results: Console Display ..................... 2-12
2.4.1 Processor Fails Self-Test in a Uniprocessor System.... 2-14
2.4.2 Processor Fails ST1 in a Multiprocessor System......... 2-16
2.4.3 Processor Fails ST2 or ST3 in a Multiprocessor
System............................................................................ 2-18
2.4.4 Memory Fails Self-Test ................................................. 2-20
2.4.5 System Fails Power-Up Exerciser ................................ 2-22
2.5 Checking Self-Test Results: Status LEDs ......................... 2-24
2.5.1 Processor LEDs.............................................................. 2-26
2.5.2 Determining Failing Test Number from LEDs............ 2-28
2.5.3 IOP, DWLMA, and Clock Card LEDs .......................... 2-30
iv
Chapter 3 Diagnostics
3.1 Test Command ....................................................................... 3-2
3.2 Running ROM-Based Diagnostics on XMI Devices.............. 3-4
3.3 Running Diagnostics on DUP-Based Devices....................... 3-8
3.3.1 Testing an SI Device........................................................ 3-8
3.3.2 Testing a DSSI Device................................................... 3-12
Appendix A Parse Trees
A.1 Reading Parse Trees ..............................................................A-2
Appendix B Power System Troubleshooting
B.1 Getting Information on Power Regulator Status .................B-2
B.1.1 Brief Data Packet ............................................................B-3
B.1.2 Full Data Packet..............................................................B-5
B.2 Show Power Command ........................................................B-11
B.3 Checking the IOP Module During Power-Up .....................B-11
B.4 Identifying an LSB Module Power Converter Failure.......B-13
Examples
2-1 Self-Test Display .................................................................. 2-12
2-2 Console Display: Processor Fails in Uniprocessor System 2-14
2-3 Console Display: Processor Fails ST1 in Multiprocessor
System .................................................................................. 2-16
2-4 Console Display: Processor Fails ST2 or ST3 in a
Multiprocessor System......................................................... 2-18
2-5 Console Display: Memory Fails Self-Test .......................... 2-20
2-6 Console Display: Sample Unexpected
Exception/Interrupt ............................................................. 2-22
2-7 Console Display: Sample Diagnostic Error Report ............ 2-23
3-1 Test Commands...................................................................... 3-2
3-2 Sample RBD Session, Test Passing ...................................... 3-4
3-3 Sample RBD Session, Test Failing ....................................... 3-6
3-4 Testing an SI Device .............................................................. 3-8
3-5 Testing a DSSI Device ......................................................... 3-12
A-1 Sample Machine Check, MCHK Code 06 .............................A-2
B-1 Sample Output, Show Power Command.............................B-11
v
Figures
1-1 Power System ......................................................................... 1-2
1-2 Power-Up Sequence ............................................................... 1-4
1-3 AC Input Box.......................................................................... 1-6
1-4 AC Input Box Troubleshooting Steps.................................... 1-7
1-5 H7263 Power Regulator LEDs .............................................. 1-8
1-6 H7263 Power Regulator Troubleshooting Steps................... 1-9
1-7 CCL Module LEDs ............................................................... 1-10
1-8 CCL Module Troubleshooting Steps ................................... 1-11
1-9 Control Panel........................................................................ 1-12
1-10 Control Panel Troubleshooting Steps ................................. 1-13
1-11 Blower ................................................................................... 1-14
1-12 Blower Troubleshooting Steps............................................. 1-15
1-13 XMI Plug-In Unit LEDs....................................................... 1-16
1-14 XMI PIU Troubleshooting Steps - 48V LED Off ................ 1-18
1-15 XMI PIU Power Connector .................................................. 1-19
1-16 XMI PIU Troubleshooting Steps - MOD OK LED Off ....... 1-20
2-1 KA7AA Power-Up Sequence, Part 1 of 3 .............................. 2-4
2-2 KA7AA Power-Up Sequence, Part 2 of 3 .............................. 2-6
2-3 KA7AA Power-Up Sequence, Part 3 of 3 .............................. 2-8
2-4 Determining Self-Test Results ............................................ 2-10
2-5 Processor and Memory Status LEDs .................................. 2-24
2-6 Processor LEDs After Self-Test........................................... 2-26
2-7 IOP, DWLMA, and Clock Card LEDs ................................. 2-30
A-1 KA7AA Machine Check Parse Tree ......................................A-4
A-2 KA7AA Hard Error Interrupts............................................A-11
A-3 KA7AA Soft Error Interrupts..............................................A-19
A-4 IOP Interrupts......................................................................A-20
A-5 DWLMA Interrupts..............................................................A-22
B-1 Command Packet Structure ..................................................B-2
B-2 Brief Data Packet Structure..................................................B-4
B-3 Full Data Packet Structure ...................................................B-5
B-4 Full Data Packet: Values for Characters 1–6.......................B-6
B-5 Full Data Packet: Values for Characters 7–34.....................B-7
B-6 Full Data Packet: Values for Characters 35–47...................B-8
B-7 Full Data Packet: Values for Characters 48–54...................B-9
B-8 IOP Module...........................................................................B-12
B-9 IOP Oscillator Switch Settings............................................B-13
Tables
1 VAX 10000 Documentation ................................................... viii
vi
2 Related Documents ................................................................... x
1-1 Power Regulator LED Summary........................................... 1-8
1-2 Control Panel LEDs During Power-Up............................... 1-13
1-3 XMI PIU Power Regulator LEDs ........................................ 1-17
1-4 XMI PIU Power Switches - Regulator B ............................. 1-17
2-1 System Testing....................................................................... 2-2
2-2 Test Numbers Indicated by KA7AA LEDs ......................... 2-28
2-3 DWLMA LEDs ..................................................................... 2-31
3-1 Exercisers ............................................................................... 3-3
B-1 Sample Brief Packet Information..........................................B-3
B-2 Sample Full/History Packet Information ...........................B-10
B-3 LED Status When a Power Converter Fails.......................B-13
vii
Preface
Intended Audience
This manual is written for Digital customer service engineers and self-
maintenance customers.
Document Structure
This manual uses a structured documentation design. Topics are organ-
ized into small sections for efficient on-line and printed reference. Each
topic begins with an abstract. You can quickly gain a comprehensive over-
view by reading only the abstracts. Next is an illustration or example,
which also provides quick reference. Last in the structure are descriptive
text and syntax definitions.
This manual has three chapters and two appendixes, as follows:
•Chapter 1, Troubleshooting During Power-Up, explains what
can go wrong during power-up and how to identify the cause of the
problem.
•Chapter 2, System Self-Test, tells how to interpret the self-test
console display and module LEDs.
•Chapter 3, Diagnostics, describes the various diagnostics used to
test the system.
•Appendix A contains the parse trees, and Appendix B contains
guidelines for troubleshooting the power system.
viii
Conventions Used in This Document
The text shown in command syntax uses these conventions:
•Bold text indicates elements to be typed at the terminal.
•Brackets ([]) indicate that an element is optional.
•Braces ({}) indicate a choice from the enclosed list.
•Angle brackets (<>) indicate that the enclosed text is not a literal de-
piction of the element but instead a reference to the kind of item that
can appear in that position.
Icons such as those shown below are used in illustrations for designating
part placement in the system described. A shaded area in the icon shows
the location of the component or part being discussed.
Document Titles
Table 1 lists the books in the VAX 10000 documentation set. Table 2 lists
other documents that you may find useful.
Table 1 VAX 10000 Documentation
Rear
Front
Title Order Number
Installation Kit EK–1000A–DK
Site Preparation Guide EK–1000A–SP
Installation Guide EK–100EA–IN
Hardware User Information Kit EK–1001A–DK
Operations Manual EK–1000A–OP
Basic Troubleshooting EK–1000A–TS
ix
Table 1 VAX 10000 Documentation (Continued)
Title Order Number
Service Information Kit EK–1002A–DK
Pocket Service Guide EK–1000A–PG
Advanced Troubleshooting EK–1001A–TS
Platform Service Manual EK–1000A–SV
System Service Manual EK–1002A–SV
Reference Manuals
Console Reference Manual EK–70C0B–TM
KA7AA CPU Technical Manual EK–KA7AA–TM
MS7AA Technical Manual EK–MS7AA–TM
I/O System Technical Manual EK–70I0A–TM
Platform Technical Manual EK–7000A–TM
Upgrade Manuals
KA7AA CPU Installation Card EK–KA7AA–IN
MS7AA Memory Installation Card EK–MS7AA–IN
DWLMA XMI PIU Installation Guide EK–DWLMA–IN
H7237 Battery PIU Installation Guide EK–H7237–IN
BA654 Disk PIU Installation Guide EK–BA654–IN
DWMBB VAXBI PIU Installation Guide EK–DWMBB–IN
Removable Media Installation Guide EK–TFRRD–IN
x
Table 2 Related Documents
Title Order Number
General Site Preparation
Site Environmental Preparation Guide EK–CSEPG–MA
System I/O Options
CIXCD Interface User Guide EK–CIXCD–UG
DEC FDDIcontroller 400 Installation/Problem
Solving EK–DEMFA–IP
DEC LANcontroller 400 Installation Guide EK–DEMNA–IN
DEC LANcontroller 400 Technical Manual EK–DEMNA–TM
DSSI VAXcluster Installation and Troubleshoot-
ing Manual EK–410AA–MG
InfoServer 150 Installation and Owner’s Guide EK–INFSV–OM
KFMSA Module Installation and User Manual EK–KFMSA–IM
KFMSA Module Service Guide EK–KFMSA–SV
RF Series Integrated Storage Element User Guide EK–RF72D–UG
TF85 Cartridge Tape Subsystem Owner’s Manual EK–OTF85–OM
Operating System Manuals
VMS Upgrade and Installation Supplement:
VAX 7000–600 and VAX 10000–600 Series AA–PRAHA–TE
VMS Network Control Program Manual AA–LA50A–TE
VAXclusters and Networking
HSC Installation Manual EK–HSCMN–IN
SC008 Star Coupler User’s Guide EK–SC008–UG
VAX Volume Shadowing Manual AA–PBTVA–TE
Peripherals
Installing and Using the VT420 Video Terminal EK–VT420–UG
LA75 Companion Printer Installation and User
Guide EK–LA75X–UG
Table des matières
Autres manuels Digital Equipment Ordinateur de bureau
Digital Equipment
Digital Equipment MicroVAX 3100 Model 30 Guide de démarrage rapide
Digital Equipment
Digital Equipment PDT 11/150 Manuel utilisateur
Digital Equipment
Digital Equipment VAXft Systems 810 Instructions d'utilisation et d'installation
Digital Equipment
Digital Equipment AlphaStation 500 Series Manuel d'utilisation
Digital Equipment
Digital Equipment VAXstation 4000 Model 60 Manuel d'installation et d'exploitation
Digital Equipment
Digital Equipment VAXmate Manuel utilisateur
Digital Equipment
Digital Equipment MicroVAX 3100 90 Mode d’emploi
Digital Equipment
Digital Equipment Venturis FX Manuel utilisateur
Digital Equipment
Digital Equipment PMS 201 Fiche technique
Digital Equipment
Digital Equipment VAXstation VLC Guide de démarrage rapide
Digital Equipment
Digital Equipment PDP-11/23-PLUS Guide de l'utilisateur
Digital Equipment
Digital Equipment PDP-11/60 Manuel utilisateur
Digital Equipment
Digital Equipment DECstation 5000 Model 200 Manuel utilisateur
Digital Equipment
Digital Equipment VT420 Manuel utilisateur
Digital Equipment
Digital Equipment PDP-8/A Manuel de service
Digital Equipment
Digital Equipment DECstation 2100 Manuel
Digital Equipment
Digital Equipment VAX 4000 Model 200 Manuel utilisateur
Digital Equipment
Digital Equipment MicroVAX 3100 40 Guide de démarrage rapide
Digital Equipment
Digital Equipment VAXstation 4000/60 Instructions d'utilisation et d'installation
Digital Equipment
Digital Equipment VAX 4000 Model 100 Guide de démarrage rapide
