Digital-Ally DVM-800 Manuel utilisateur
Installation Guide
DVM-800
Copyright © 2017, Digital Ally, Inc. All Rights Reserved. This publication may not be repro-
duced, stored in a retrieval system, or transmitted in whole or part in any form or by any
means electronic, mechanical, recording, photocopying, or in any other manner without
the prior written approval of Digital Ally, Inc.
860-00185-00 Rev L
Copyright © 2017 Digital Ally, Inc. i
On behalf of the Digital Ally team, I want to thank you for this order. We appreciate the
trust and condence you have shown us.
We will strive to do everything we can to provide you with the best products, support
and customer service. Please know we have a team of engineers, sales, manufacturing,
customer service, accounting, technicians and support personnel who work to provide
the excellent customer experience and satisfaction you demand and of which is the
cornerstone of our business.
Below are a few comments and suggestions before you get started with the installation
of your Digital Ally DVM-800 system:
• The DVM-800 is designed to be easily installed into virtually any make
or model of vehicle.
• Please check the packing list against the items enclosed to make sure
you have received all the items.
• Pictures of the various components of the system are shown
throughout this guide to assist you.
• Please refer to the DVM-800 Operation Guide for operating
instructions. You can download and print this document by logging in
to the Digital Ally website at http://www.digitalallyinc.com/login.cfm.
• The default passwords to access the DVM can be located on page 4-1
of this document.
• The system diagram is provided on page 2-5, and the wiring
connections chart is provided on page 2-6.
If you need any help, have any questions, or just want to provide some comments,
please feel free to contact us and we will be happy to assist you. We are located in the
Kansas City metro area.
Best regards,
Stanton Ross, CEO
Digital Ally, Inc.
9705 Loiret Blvd
Lenexa, KS 66219
Ph: 800-440-4947 or 913-814-7774
Fax: 913-814-7775
Email: [email protected]
Website: www.digitalallyinc.com
SR/mb
Copyright © 2017 Digital Ally, Inc. ii
Table of Contents
Section 1
Before You Begin........................................................................................................... 1-1
Tools Needed ..................................................................................................................1-1
Cautions and Notes........................................................................................................1-1
Section 2
Parts List and System Diagrams ................................................................................. 2-1
DVM-800 Standard Parts Kit 001-00081-00..................................................................2-1
External Camera Packages............................................................................................2-2
Optional Parts.................................................................................................................2-3
DVM Features Diagram..................................................................................................2-4
System Diagram..............................................................................................................2-5
Wiring Connections Chart .............................................................................................2-6
Section 3
Installation Instructions .............................................................................................. 3-1
Step 1: Factory Mirror Removal ....................................................................................3-1
Screw Mount Rearview Mirror Removal .................................................................................3-1
Wedge (Screwless) Mount Rearview Mirror Removal..........................................................3-1
Cam Lock Rearview Mirror Removal........................................................................................3-1
Step 2: DVM Installation ................................................................................................3-2
Step 3: Interface Box Installation .................................................................................3-3
Interface Box .................................................................................................................................3-3
Mount the IF Box ..........................................................................................................................3-3
DVM to Interface Box Cable Installation.................................................................................3-3
Step 4: Power, Ground, and Input Sensor ...................................................................3-4
Power Cable Installation .............................................................................................................3-4
IF Input Sensor Cable Installation.............................................................................................3-5
Determine the Device Trigger Signal Level ............................................................................3-5
Siren Adapter Interface (optional)............................................................................................3-6
Step 5: Wireless Microphone Installation....................................................................3-6
DWM Wireless Microphone Cable Installation......................................................................3-6
Remote Accessory Out................................................................................................................3-7
Example Relay Wiring Diagrams: ......................................................................................... 3-7
Step 6: External Camera Installation ...........................................................................3-8
Overview .........................................................................................................................................3-8
Option 1: 12XC Camera & Backseat Camera - with 2 Cables ............................................ 3-8
Option 2A and 2B: 12XC Camera & License Plate Camera ................................................ 3-9
Option 3A and 3B: 12XC Camera, Backseat Camera & License Plate Camera.............. 3-10
Option 4: 12XC Camera & Backseat Camera - with Y-Cable............................................ 3-11
Step 3: GPS Module ......................................................................................................3-12
Step 4: Wi-Fi Antenna...................................................................................................3-12
Section 4
Testing the Installation................................................................................................ 4-1
Section 5
Support........................................................................................................................... 5-1
How to Reset the DVM-800 System..............................................................................5-1
Basic Troubleshooting ...................................................................................................5-1
Interface Box Sensor Worksheet..................................................................................5-3
Section 6
Contact Information..................................................................................................... 6-1
Digital Ally, Inc. |Before You Begin 1-1
DVM-800 Installation Guide |860-00185-00 Rev L
Go Back To Table of Contents
This document references the installation of the DVM-800 system, external cameras,
and the cabling harnesses.
Tools Needed
• #2 Phillips head screwdriver
• #20 Torx screwdriver or bit
• 1/8” (4 mm) at-blade screwdriver
• Digital Volt Meter
• Tie wraps
• 16 Gauge Scotchlok or butt connectors
• Wire Crimpers
Cautions and Notes
Please read the following instructions and precautions before installing the DVM-800.
• For assistance, a qualied installation technician or mechanic should
be consulted.
• Do not use excessive force when removing the mirror from the
windshield. The mirror mounting plate may become separated from
the windshield and/or the windshield may break if excessive force
is used. If you are unfamiliar with rearview mirror removal seek
professional assistance.
• Do not route wiring and cabling over sharp metal edges where they
may become damaged or cut.
• To prevent electrical shorts or breakage in the wiring and cabling, do
not allow wiring and cabling to be pinched behind trim pieces, panels,
or other objects.
• Do not run wires or cables in areas where they may become damaged
by heat from the engine or the exhaust system.
• Do not install any DVM components or wiring in the deployment path
of the air bags.
• When installing the cables or making wire connections, it is
recommended you leave a little slack in the cable connections to allow
for service loops and for adjustment of the mirror so the connections
do not get pulled or accidentally disconnected.
• Do not connect any Digital Ally wiring in series with a vehicle charge
guard or battery saver. All system battery connections must be made
to a constant +13.8VDC location within the vehicle.
• Where possible, do not leave excessive cable above the headliner. We
recommend at least 2 feet of distance between our cabling and that of
other systems which may carry a signal for transmit and/or receive.
Section 1
Before You Begin
Digital Ally, Inc. | Parts List and System Diagrams 2-1
DVM-800 Installation Guide |860-00185-00 Rev L
Go Back To Table of Contents
DVM-800 Standard Parts Kit 001-00081-00
External Camera Packages are shown on the next page
Part # Image and Description
006-08265-31 DVM-800, Main Unit
002-05146-00 DVM Mount Assembly
002-05168-00
Accessory Kit: Includes Windshield Mounting Puck,
Lanyard, Mounting Hardware, Security Tamper
Resistant Screw and Key Kit
006-08210-01 IF Box (model IFE-20)
008-01388-00 Cable, Main Power to IF Box 3.1m (10.1ft.)
008-01386-01 Cable, IF Box to DVM 4.6m (15.0ft.)
002-05185-00
DWM-928 System, (900MHz) Includes Wireless
Microphone, Charging Cradle, Mounting Bracket,
and Lapel Microphone. (DWM-865 version available
for countries that require 800MHz)
004-09064-00 Backseat Microphone for DWM-928/865, 20ft.
2.5mm plug
008-0100 Cable, USB 2.0 Type A to Mini-B, 3.3 ft.
008-01455-00 Cable, Wireless Microphone to DVM-800
008-01464-00 Cable, IF Box, Sensor, RJ45
001-00010-20 Wi-Fi Antenna
008-01410-00 GPS Module
363-00087-00 SD card, 32GB
860-00184-00 Quick Reference Guide
Section 2
Parts List and System Diagrams
Digital Ally, Inc. | Parts List and System Diagrams 2-2
DVM-800 Installation Guide |860-00185-00 Rev L
Go Back To Table of Contents
External Camera Packages
Part Number Kit Contents
Option 1
Front 12XC Camera
& Backseat Camera
with 2 Cables
002-05136-12
• 566-00138-00 Front 12XC Camera
• 566-00134-00 Backseat Camera,
w/Smart IR, Reverse Image Switch,
Water Resistant (IP69)
• 008-01390-00 Backup Camera Cable
• 008-01442-00 Cable, 12XC Camera to
DVR
Option 2A
Front 12XC Camera
& License Plate
Camera
002-05136-21
• 566-00138-00 Front 12XC Camera
• 566-00141-00 License Plate Backup
Camera w/adapter cable
• 008-01390-00 Backup Camera Cable
• 008-01442-00 Cable, 12XC Camera to
DVR
Option 2B
Front 12XC Camera
& Mini Backup
Camera
002-05136-22
• 566-00138-00 Front 12XC Camera
• 566-00144-00 Mini Backup Camera
w/adapter cable
• 008-01390-00 Backup Camera Cable
• 008-01442-00 Cable, 12XC Camera to
DVR
Option 3A
Front 12XC Camera,
Backseat Camera
& License Plate
Camera
002-05136-32
• 566-00138-00 Front 12XC Camera
• 566-00141-00 License Plate Backup
Camera w/adapter cable
• 566-00134-00 Backseat Camera,
w/Smart IR, Reverse Image Switch,
Water Resistant (IP69)
• 008-01390-00 Backup Camera Cable
• 008-01443-00 Y-Cable, 12XC Camera
and Backseat Camera to DVR
Option 3B
Front 12XC Camera,
Backseat Camera
& Mini Backup
Camera
002-05136-33
• 566-00138-00 Front 12XC Camera
• 566-00134-00 Backseat Camera,
w/Smart IR, Reverse Image Switch,
Water Resistant (IP69)
• 566-00144-00 Mini Backup Camera
w/adapter cable
• 008-01443-00 Y-Cable, 12XC Camera
and Backseat Camera to DVR
• 008-01390-00 Backup Camera Cable
Option 4
Front 12XC Camera
& Backseat Camera
with Y-Cable
002-05136-42
• 566-00138-00 Front 12XC Camera
• 566-00134-00 Backseat Camera,
w/Smart IR, Reverse Image Switch,
Water Resistant (IP69)
• 008-01443-00 Y-Cable, 12XC Camera
and Backseat Camera to DVR
Digital Ally, Inc. | Parts List and System Diagrams 2-3
DVM-800 Installation Guide |860-00185-00 Rev L
Go Back To Table of Contents
Optional Parts
Part Number Image and Description
008-01382-00
008-01382-01
008-01382-02
008-01382-03
Backup Camera 25ft Extension Cable
Backup Camera 40ft Extension Cable
Backup Camera 60ft Extension Cable
Backup Camera 15ft Extension Cable
025-00018-00
025-00019-00
DWM-928 External 900MHz Antenna.
DWM-865 External 800MHz Antenna.
002-05091-00 Charger, RMT Desktop Charger 120VAC
002-05153-00 Auxiliary 4-Camera Switch Box V3
002-05204-00 SD Card Reader with USB Cable for PC
740-00388-00 Panel Mount Remote Activation Switch
740-00399-00 Footswitch, Maintained (18/2AWG, 6ft, bare
leads)
002-05030-00 Drop Mount Adapter
002-05112-00 Windshield Mount Adapter Kit, Dodge
Charger
006-08267-00 Windshield Mount Adapter Kit, Dodge
Sprinter
006-0030 Visor Mount For external front camera
006-0050 Siren Adapter Interface
Digital Ally, Inc. | Parts List and System Diagrams 2-4
DVM-800 Installation Guide |860-00185-00 Rev L
Go Back To Table of Contents
1
2 3
10
4
11
12
13 14 15 16 417 18
5
6 7 8
9
1 LCD Display: Used for viewing video. LCD is behind the mirror and is not visible when o.
2 Internal Microphone: Records audio from the passenger compartment.
3 Manual Record button: This button is used to Start/Stop a manual event recording.
4LED Status Indicators (Passenger Facing & Road Facing): These visible indicators give the
operator feedback on the operational status of the DVM from inside or outside of the vehicle.
5Infrared Illuminators: Automatically provides Infrared illumination for the Passenger Facing
Camera during low light conditions.
6 Passenger Facing Camera: Records video of the vehicle passenger area.
7Ambient Light Sensor: Senses ambient light to automatically adjust LCD brightness and interior
Infrared Illuminators.
8Menu and Playback Buttons: Used to navigate the DVM menus, play back videos, and log into
the system.
9SD Card: A removable SD card is installed behind the external SD door. The SD card is installed at
a slight angle and positioned with the connector pads as shown above.
10 External Microphone Input: The Digital Wireless Microphone audio cable is connected here.
11 SD Card door: Provides access to the removable SD memory card.
12 USB Port: For data transfer and Wi-Fi download.
13 Camera 1 Port: An external camera can be connected to the DVM with this port.
14 Camera 2 Port: A 2nd external camera is connected to the DVM here.
15 GPS Port: The GPS antenna is connected here.
16 Power Port: Provides power to the DVM. Also used to connect the Interface Box to the DVM.
17 Reset Button: Used to perform a hard reset of the system.
18 Road Facing Camera: Records the view in front of the vehicle.
DVM Features Diagram
Digital Ally, Inc. | Parts List and System Diagrams 2-5
DVM-800 Installation Guide |860-00185-00 Rev L
Go Back To Table of Contents
System Diagram
Digital Ally, Inc. | Parts List and System Diagrams 2-6
DVM-800 Installation Guide |860-00185-00 Rev L
Go Back To Table of Contents
Wiring Connections Chart
Input Signal Color Pin # Description
Main Power Cable (page 3-4)
Battery Red 1
+13.8VDC Unswitched Power. Connect directly to the
engine compartment battery. DO NOT connect any
Digital Ally equipment through a vehicle charge guard
or battery saver.
Ignition 2
+13.8VDC Switched. Powered only when ignition is in
the ACC or On position. Ignition is used to cycle the
system power on and o.
Ground Black 3 Chassis Ground. Secure directly to vehicle frame.
Sensor Input Cable (page 3-5)
Reverse Red 1Connect to reverse gear relay, or reverse light bulb.
Emergency
Lights Orange 2Connect to light bar controller.
+12VDC when emergency lights are activated.
Brakes Blue 3Connect to brake pedal switch or 3rd brake light.
+12VDC when brake is active.
VSS Yellow 4 Connect to Vehicle Speed Sensor pulse signal.
Sensor 5 5Congurable input sensor
Mic Trigger Out Green 6Connect to Green wire of Wireless Microphone Cable
Mic Trigger In Brown 7 Connect to Brown wire of Wireless Microphone Cable
Ground Black 8Chassis Ground
RJ45 RJ45 N/A Connect to “SENS A” RJ45 input of Interface box
DWM Wireless Microphone Cable (page 3-6)
Battery Red 1+13.8VDC Unswitched Power. Connect directly to the
engine compartment battery.
Ground Black 2Connect to Chassis Ground
Mic Trigger Out Green 3 Connect to Green wire of Input Sensor Cable.
Mic Trigger In Brown 4 Connect to Brown wire of Input Sensor Cable.
Remote
Accessory Out Violet 5Connect to auxiliary equipment (optional connection)
RJ45 RJ45 N/A Connect to Wireless Microphone Cradle.
Audio 3.5mm N/A Connect to 3.5mm Ext Mic jack on back of DVM.
Autres manuels pour DVM-800
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Digital-Ally Caméra embarquée
