Page 8 Digit-KD instruction manual
ENGLISH
OFF
OK
8.0. PARTIAL ARMING
(NIGHT mode)
With the control panel disarmed (OFF), proceed as follows:
****
ON
OK
ON
OK delay
ON
OK 1 2
3 4
Digit any one of the memorized
codes (example 1, 2 and 3). On
the display 3 asterisks will appear.
ON
OK
If a few zones are by-passed or associated
to the Night group, during the exit time on
the display will appear the message
“zone by-p” instead of “delay”.
ON
OK zone by-p
To verify the zones by-passed or associated
to the Night group, press more times the
button "FORWARD" during the exit time.
On the display the menu (in groups of 4)
are visualized with the complete list of all
zones, plus
Bat
(low battery),
Tmp
(Tamper)
and Firendio (fire). Beside the by-passed
zones or associated to the Night group a
dot will appear that flashes quickly.
In the above example, the zones 3
and 4 are by-passed.
The flashing dots will remain vis-
ualized only during the exit time.
ON delay
OK
ON
OK
Press the button to confirm.
The control
panel emits one beep. On the
display the message on the right appears.
The writing “ON” and the LED “UNIT ON”
will flash quickly.
After a few seconds, the writing “delay” will
appear which indicates the countdown of
the exit time (30 seconds).
During the exit time press the button .
The control panel emits one beep. On the
display a moon symbol that
flashes quickly
will appear
.
At the end of the exit time, the
writing “delay” will disappear and the
writing “
ON
”, the symbol of the moon and
the LED “UNIT ON” from flashing quickly
will become fixed. The control panel is armed
in NIGHT mode and is fully functional.
If while arming there are zones triggered or
unbalanced not by-passed and not associated
to the Night group, or control panel has low
battery, the writing “ON”, the symbol of
the moon on the display and the LED
“ON” will flash slowly during the exit time.
Furthermore, the message “zone in alarm” or “battery centr.” will appear.
To remove the menu from the display,
press the button "FORWARD" or wait for
automatic cancellation that takes place
after approximately 40 seconds.
ON
zone in alarm
delay
