Digilock numeris aspire Manuel utilisateur
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
1
Lock Parts
Keys
Key Insertion
Aspire locks with a keypad interface are operated by a 4-7 digit User Code or by an ADA compliant User Key. Manager Keys provide
management access and external power. Programming is accomplished via a Programming Key unique to the lock system. An optional mobile
application tool simplifies lock system management and provides audit trail.
User Key Manager Key1Programming Key2
Operates the lock •••
Overrides user access • •
Allows management inspection • •
Provides external power • •
Programs Manager Keys to the lock •
Assigns user credentials3 (in assigned use functionality) •
Sets lock functionality •
Numeris logo must face up on standard and vertical body locks.
VerticalStandard
Front Unit
Standard Vertical
C Button
C Button
Key Button
Key Button
Key Slot
Key Slot
Alpha Numeric
Keypad
Rear Unit
Cover Plate
Lock Mounting
Holes
½" (12.7 mm)
Deadbolt
Cover Plate Screw
Pull Handle
Pull Handle
Connection Options
Cable
Pin
LED Usage Indicator
Shared Use
Assigned Use
1 Up to 6 Manager Keys may be programmed to each lock. If managed with the optional Mobile App, up to 250 Manager Keys may be programmed to each lock.
2 1 Programming Key allowed per lock system.
3 Up to 20 user credentials may be assigned to each lock. If managed with the optional Mobile App, up to 250 user credentials may be assigned to each lock.
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
2
Programming Instructions
Setup
Locks are shipped with factory default settings (only operates by pressing = `). Each lock must be setup to operate with a Programming
Key and Manager Keys.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn on.
Insert one Manager Key at a
time.
A beep will be heard for each
Manager Key programmed.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Repeat above steps for each
lock or follow instructions to
Express Register Manager Keys
to setup all locks.
Express Register Manager Keys
The Programming Key can quickly program multiple locks to operate with the same Manager Keys.
Go to a lock already programmed to operate with the Manager Keys.
Press = ` 6 1 `.
The LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
Insert the Programming Key to program each lock to operate with
the same Manager Keys.
Two sets of two-tone beeps will be heard and the LED will flash
twice to indicate successful programming.
End express registration mode.*
Go to any programmed lock.
Press = ` then insert the Programming Key.
Press = ` then insert the Programming Key again to return the
bolt to the original position.
*The Programming Key will continue to function in express registration mode until it is used to operate a lock.
1
1
3 4a
2
2 3 4
4b
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
3
Programming Instructions
Add Manager Keys
Manager Keys can be programmed to the locks at any time.
Go to a lock requiring additional
Manager Keys.
Press = ` 5 5 `.
The LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard.
Insert each additional Manager
Key one at a time.
A beep will be heard for each
Manager Key programmed.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Repeat above steps for each
lock or follow instructions to
Express Register Manager Keys
to quickly program multiple
locks to operate with the same
Manager Keys.
Replace Keys
The locks must be reprogrammed to prevent the lost/stolen keys from operating a lock.
To replace the Programming Key:
Note the order or serial number (found on the lock’s rear unit).
Contact Digilock Support to purchase a replacement Programming
Key.
To replace the Manager Keys:
Collect all remaining and replacement Manager Keys.
Go to any lock operated by the lost/stolen Manager Keys.
Press = ` 5 5 `.
The LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard.
Insert the Programming Key again.
Three sets of two-tone beeps will be heard and the LED will turn
off. All previously programmed Manager Keys will be erased.
Follow instructions to Add Manager Keys to program the remaining
and replacement Manager Keys to the locks.
1 2 3 4
1a
1
2a
2
1b
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
4
Programming Instructions
Set Lock Functionality
Each lock can be set for either shared or assigned use functionality. Press = to check functionality. If in shared use, LED is red. If in assigned
use, LED is green.
To set for assigned use:
Press = ` 6 5 `.
The red LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard
and the green LED will flash
once.
Assign User Credentials (for assigned use functionality only)
Make sure that the lock is set for assigned use functionality (a green LED will flash when = is pressed). Up to 20 user credentials (User Codes
and/or User Keys) may be assigned to each lock.
Assign User Codes:
Press = ` 5 5 `.
The LED will turn on.
Insert a valid Manager Key.
A two-tone beep will be heard.
Press =
[a new 4-7 digit code]
`. A two-tone beep will be heard.
Press =
[the same 4-7 digit code]
`.
Two sets of two-tone beeps will be heard and the LED will turn off.
Assign User Keys:
Press = ` 5 5 `.
The LED will turn on.
Insert a valid Manager Key.
A two-tone beep will be heard.
Insert a User Key.
Two sets of two-tone beeps will be heard and the LED will turn off.
To set for shared use:
Press = ` 5 6 `.
The green LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard
and the red LED will flash
once.
1 12 2
1a
1a
2
2a
1b
1b 2b
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
5
094361
28643
139567
8112548
5379
6924
Programming Instructions - In Assigned Use Functionality
Remove User Credentials
Make sure the lock is in assigned use functionality (a green LED will flash when = is pressed). The locks must be reprogrammed to remove
user credentials from operating a lock.
Collect all remaining and replacement user credentials
(User Codes and User Keys).
Press = ` 5 5 `.
The LED will turn on.
Insert a valid Manager Key.
A two-tone beep will be heard.
Insert the Manager Key again.
Three sets of two-tone beeps will be heard and the LED will turn
off. All previously assigned user credentials will be removed.
Follow Assign User Credentials instructions to assign the remaining
and replacement user credentials to the locks.
Express Register User Credentials and Manager Keys
Make sure the lock is set for assigned use functionality (a green LED will flash when = is pressed). The Programming Key can quickly program
multiple locks to operate with the same user credentials and Manager Keys.
Go to a lock already
programmed to operate with
the user credentials and
Manager Keys.
Press = ` 66 `. The
LED will turn on.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Insert the Programming Key to
program each lock to operate
with the same user credentials
and Manager Keys.
Two sets of two-tone beeps will
be heard and the LED will flash
twice to indicate successful
programming.
End express registration mode.*
Go to any programmed lock.
Press = ` then insert the
Programming Key.
Press = ` then insert the
Programming Key again to
return the bolt to the original
position.
*The Programming Key will continue to function in express registration mode until it is used to operate a lock.
1 2 3 4a
1
3
2a
4
2b
4b
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
6
Programming Instructions - In Assigned Use Functionality
Replace a User Credential
Replace an Assigned User Code
with a New User Code:
Press = ` then insert a valid Manager
Key.
A two-tone beep will be heard and the
LED will turn on.
Press =
[assigned user code]
`.
A two-tone beep will be heard.
Press
=
[a new 4-7 digit user code]
`
=
[the same 4-7 digit user code]
`.
Two sets of two-tone beeps will be heard
and the LED will turn off.
Replace an Assigned User Code
with a New User Key:
Press = ` then insert a valid Manager
Key.
A two-tone beep will be heard and the
LED will turn on.
Press =
[assigned user code]
`.
A two-tone beep will be heard.
Insert a new User Key.
Two sets of two-tone beeps will be heard
and the LED will turn off.
1
1
2
2
3
3
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
7
Programming Instructions - In Assigned Use Functionality
Replace a User Credential
Replace an Assigned User Key
with a New User Key:
Press = ` then insert a valid Manager Key.
A two-tone beep will be heard and the
LED will turn on.
Insert the assigned user Key.
A two-tone beep will be heard.
Insert a new User Key.
Two sets of two-tone beeps will be heard
and the LED will turn off.
Replace an Assigned User Key
with a New User Code:
Press = ` then insert a valid Manager Key.
A two-tone beep will be heard and the
LED will turn on.
Insert the assigned User Key.
A two-tone beep will be heard.
Press
=
[new 4-7 digit user code]
`
=
[the same 4-7 digit user code]
`.
Two sets of two-tone beeps will be heard
and the LED will turn off.
1
1
2
2
3
3
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
8
Set Additional Lock Features (for shared use functionality only)
LED Usage Indicator
When in shared use functionality, each lock can be programmed to have the LED flash or not flash while the lock is in use. The default setting is
ON (red LED flashes while lock is in use).
To turn off the LED Usage
Indicator:
Press =` 92 `.
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Auto Unlock
When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF (does
not auto unlock).
To turn on Auto Unlock:
Press =` 95 `.
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn on.
Enter the number of hours from 1 - 9 9 then press `.
Two sets of two-tone beeps will be heard and the LED will turn off.
For example: Press 8 ` to set the lock to auto unlock after 8
hours.
To turn off Auto Unlock:
Press =` 94 `.
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
To turn on the LED Usage
Indicator:
Press =` 91 `.
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
2 2
2
2
1
1a
1
1
1b
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
9
Operating Instructions - In Shared Use Functionality
In shared use functionality, the user enters any 4-7 digit User Code or inserts any User Key to lock and the same User Code or User Key to
unlock. Once unlocked, the lock is available for a different user.
* After 3 consecutive incorrect user code entries, the keypad will be disabled for 1 minute (Sleep Mode).
** If a valid Manager Key or the Programming Key is used to relock, the previous user credential will continue to operate the lock.
Operate with a User Code
To lock: Press =
[any 4-7 digit code]
`.
To unlock: Press =
[the same 4-7 digit code]
`.*
Operate with a Manager Key
To unlock: Insert a valid Manager Key.
To relock: Insert a valid Manager Key.**
Operate with a User Key
To lock: Insert any User Key.
To unlock: Insert the same User Key.
Operate with the Programming Key
To unlock: Press = ` then insert the Programming Key.
To relock: Press = ` then insert the Programming Key.**
1a
1a
1a
1a
1b
1b
1b
1b
Standard Keypad
Bolt Mechanism
Shared & Assigned Use Functionality
Product Guide
10
Operating Instructions - In Assigned Use Functionality
*After 3 consecutive incorrect user code entries, the keypad will be disabled for 1 minute (Sleep Mode).
In assigned use functionality, users operate the lock with their assigned user credential (either a User Code or a User Key).
Operate with a User Code
To unlock: Press = [assigned 4-7 digit code] `.*
To relock: Press = [assigned 4-7 digit code] ` or
press = ` `.
Operate with a Manager Key
To unlock: Insert a valid Manager Key.
To relock: Insert a valid Manager Key or press = ` `.
Operate with a User Key
To unlock: Insert the assigned User Key.
To relock: Insert the assigned User Key or press = ` `.
Operate with the Programming Key
To unlock: Press = ` then insert the Programming Key.
To relock: Press = ` then insert the Programming Key or
press = ` `.
1a
1a
1a
1a
1b
1b
1b
1b
Autres manuels pour numeris aspire
2
Table des matières
Autres manuels Digilock Clavier
