Digi IX10-00G4 Manuel utilisateur

IX10

User Guide

Firmware version 22.5

Revision history—90002399

Revision Date Description

D June 2021 Release of Digi IX10 firmware version 21.5:

nWi-Fi enhancements:

lAdded support for WPA3 Wi-Fi encryption:

oWPA2/WPA3 Personal

oWPA3 Enhanced Open

oWPA3 Personal

lAdded support for WPA and WPA/WPA2 mised

mode with TKIP.

nCellular enhancements:

lAdded support for modem firmware update to the

Admin CLI.

lAdded support for over-the-air (OTA) modem

firmware update to check, list, and update to new

modem firmware from the Digi firmware server.

lAdded the ability to scan for cellular carriers on the

Modem status page and the ability select a

particular PLMN/network to use.

nAdded commands for over-the-air (OTA) system

firmware update to check, list, and update to new

firmware from the Digi firmware server.

nAdded a show dns command to the Admin CLI to

display active DNS servers and their associated

interface.

nAdded a show ntp command to the Admin CLI to

display the status of the NTP service.

nExpanded Port forwarding option to support a range of

ports, including one-to-one and many-to-one port

mappings.

nAdded options to control packet filtering for the

network analyzer.

nVPN enhancements:

lIPsec enhancements:

oAdded support for multiple remote endpoints

and the ability to use round-robin or to

randomly select an endpoint to establish a

tunnel to.

oAdded configurable options to control IKE

transmit interval, tunnel retry interval, and

IX10 User Guide 2

Revision Date Description

tunnel retry timeout.

lLDAP enhancements:

oAdded a login attribute to provide the ability to

match the attribute set on an Active Directory

server.

nSureLink enhancements

lAdded the ability to configure how many times a

SureLink test must run, and must fail, before the

interface is restarted or the device is rebooted.

lAdded the ability to configure how many times a

SureLink test must pass before an interface is

considered to be working.

lAdded the ability to test another interface's status.

nSNMPv2 supported added.

nSimple Certificate Enrollment Protocol (SCEP)

supported added.

nUpdated python to version 3.6.13.

nAdded the default digi.device local domain.

E September 2021 Release of Digi IX10 firmware version 21.8:

nAdded LXC container support for running localized

containers on the device.

nAdded support for maintenance windows triggers to

control when a device is available for Digi Remote

Manager maintenance activity.

nVPNenhancements:

lAdded support for L2TPv3 tunneling.

lNew option to enable, disable, or force IPsec IKE

fragmentation.

nImproved options for creating a custom default

configuration:

lsystem backup CLI commands for generating a

custom default config file based on the active

config settings on the device.

lNew section on the File System page of the Web UI

for loading a configuration backup file as the

custom default config

lNew persistent files folder accessible through Digi

Remote Manager where users can upload a

configuration backup.

lAdded ability to clear a custom default

configuration by performing by pressing the ERASE

IX10 User Guide 3

Revision Date Description

button, waiting for the device to reboot, then

pressing the ERASE again.

nAdded ability to override or edit SSH server options.

nAdd option to utilize GPS from cellular modem as a

source for the Location service

nAdded options for filtering Wi-Fi scanner results based

off of MAC addresses or RSSI signal strength.

nAdded options for sending local device event logs to

Digi Remote Manager.

nNew system time CLI command for manually setting

the local date and time.

nNew firewall packet filter options to allow/deny

packets based off of a range of source or destination

MAC addresses.

nNew monitoring metrics upload CLI command to

send on-demand health metrics to Digi Remote

Manager.

nAdded support for the configuration of custom scripts

that will be run manually, and a new system script

start CLI command to run manual scripts.

nNew "Find me" feature that flashes cellular-related

LEDs to help locate the device onsite and a new

system find-me command.

nAdded datapoint.upload_multiple function to

digidevice python module for uploading multiple

datapoints to DigiRM at once.

nAdded clear dhcp-lease command to remove all

dynamic DHCP leases or certain DHCP leases based on

MAC address or IP address.

nAdded speedtest command for performing on-demand

iPerf or nuttcp speedtests.

nLocal users are now required to be assigned to an

authentication group.

nNew Network → Advanced → Sequential DHCP address

allocation configuration setting for controlling if DHCP

addresses are assigned sequentially or randomly

(disabled by default).

nAdded ability to control if DHCP addresses are assigned

sequentially or randomly (disabled by default).

nAdded 802.1x port-based network access control,

configurable per network interface.

F December 2021 Release of Digi IX10 firmware version 21.11:

IX10 User Guide 4

Revision Date Description

nConfiguration option to allow for automatic update of

new firmware (disabled by default).

nUser authentication enhancements:

lAdded TACACS+ command authorization and

accounting for Admin CLI commands.

lAdded a new username alias to provide an

alternate username that allows for special

characters in the username.

nVPNenhancements:

lAdded support for PPP-over-L2TP tunnels.

lChanged default IPsec IKE DH group to 14 for

enhanced compatibility with industry standard

settings.

nLocation services enhancements:

lNew option for Location service to specify the

talker ID used in NMEA mesage strings.

lInclude the mode indicator field in NMEA messages

constructed when a GPS fix isn’t obtained.

nSureLink enhancments:

lAdded new settings under cellular Surelink options

to have the device reset the cellular modem if a

specified number of Surelink tests fail

lAdded show surelink Admin CLI command.

nSerial port enhancements:

lNew option to add and configure an external USB-

to-serial adapter.

lDisable serial history in remote access mode by

default.

nSupport for sending analog and digial I/O health

metrics to Digi Remote Manager.

nAdded show containers Admin CLI command.

G March 2022 Release of Digi IX10 firmware version 22.2:

nVPNenhancements:

lRenamed VPN >IPsec >Tunnels >Policies >Local

network setting to Local traffic selector and

added Remote traffic selector.

lAdded a Dynamic option to the Local traffic

selector to configuration of a local network by

protocol and/or port instead of a network address

range.

lAdded Protocol and Port match criteria for Local

IX10 User Guide 5

Revision Date Description

traffic selector and Remote traffic selector.

lAdded VPN >IPsec >Advanced >Debug level to

specify the logging verbosity of IPsec messages in

the device system logs.

nAdded Realport support.

nEnhancements to communications with Digi Remote

Manager:

lEnhanced security for communications with Digi

Remote Manager by using client-side certificates.

lThe default URL for the device's Remote Manager

connection is now edp12.devicecloud.com. This

URL is required to utilize the client-side certificate

support.

nNew Switch SIM SureLink action for WWAN interfaces,

which allows SureLink to be configured to switch to the

alternate SIM if the modem is connected but SureLink

test are failing.

lNew Switch SIM fail count option to determine

how many SureLink failures are required prior to

switching to the alternate SIM.

nNew Socket ID string option to send the configured

text to the remote server(s) when a TCP socket

connection is opened to the serial port.

nNew cat Admin CLI command for displaying file

contents.

H June 2022 Release of Digi IX10 firmware version 22.5:

n5G enhancements:

lAdded 5G slice support for configuring the slice

type for the 5G modems.

nSurelink enhancements:

lEnabled Surelink reset_modem action by default

on cellular interfaces and set fail count to three.

lUpdated Surelink reset_modem action to

automatically power cycle the modem in the event

that the modem fails to reset.

nSerial port support enhancements:

lAdded serial PPP dial-in mode to handle AT-based

connection requests from a device connected to a

serial port and provide IPv4 networking to the

device.

lAdded suppport for Realport serial mode.

IX10 User Guide 6

Revision Date Description

nAdded the ability to configure CPU performance and

power consumption.

nAdded cellular APN and cellular connection duration as

datapoints sent to Digi Remote Manager.

nWi-Fi scanner enhancements:

lAdded support for sending an HTTP or TCP stream

of results from the Wi-Fi scanner to one or more

remote servers.

nSCEP enhancements:

lNew SCEP client settings and underlying

functionality to support connecting to additional

SCEP servers.

lAdded show scep Admin CLI command to show

the sync status, expiration dates, and additional

details of any configured SCEP clients.

nVPN enhancements:

lInclude the hostname of the device in the client

.ovpn file listed on the Status → OpenVPN → Servers

page in the web UI.

nLocation services enhancements:

lNew settings to control the NMEA message content

that the devices sends when there is no valid fix

from any of the configured location sources.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States

and other countries worldwide. All other trademarks mentioned in this document are the property of

their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

www.digi.com/howtobuy/terms

IX10 User Guide 7

Customer support

Gather support information: Before contacting Digi technical support for help, gather the following

information:

Product name and model

Product serial number (s)

Firmware version

Operating system/browser (if applicable)

Logs (from time of reported issue)

Trace (if possible)

Description of issue

Steps to reproduce

Contact Digi technical support: Digi offers multiple technical support plans and service packages.

Feedback

To provide feedback on this document, email your comments to

[email protected]

Include the document title and part number (IX10 User Guide, 90002399 H) in the subject line of your

email.

IX10 User Guide 8

Contents

Revision history—90002399 2

What's new in Digi IX10 version 22.5

Digi IX10 Quick start

Step 1: What's in the box 21

Step 2: Gather accessories 21

Step 3: Connect 22

Apply Dielectric Grease over SIMContacts 23

Step 4: Configure 25

Digi IX10 hardware reference

Digi IX10 features and specifications 26

IX10 accessories 26

IX10 front and side views 26

IX10 LEDs 27

Power (PWR) 28

SIM 28

LTE 28

Signal quality indicators 29

Ethernet Link and Activity 29

Signal quality bars explained 30

IX10 power supply requirements 31

Digi IX10 serial connector pinout 31

10-pin serial cabling options 32

QR code definition 32

Hardware setup

Install SIM cards 34

Apply Dielectric Grease over SIMContacts 34

SIM removal 35

Tips for improving cellular signal strength 35

Connect data cables 35

Mount the IX10 device 35

Attach to a mounting surface by using the mounting tabs 36

Attach to DIN rail with clip 36

IX10 User Guide 9

IX10 User Guide 10

Firmware configuration

Review IX10 default settings 40

Local WebUI 40

Digi Remote Manager 40

Default interface configuration 40

Other default configuration settings 41

Change the default password for the admin user 41

Configuration methods 43

Using Digi Remote Manager 44

Using the local web interface 44

Log out of the web interface 45

Use the local RESTAPI to configure the IX10 device 45

Use the GETmethod to return device configuration information 45

Use the POST method to modify device configuration parameters and list arrays 47

Use the DELETE method to remove items from a list array 48

Using the command line 50

Access the command line interface 50

Exit the command line interface 51

Central management

Digi Remote Manager support 53

Certificate-based enhanced security 53

Configure your device for Digi Remote Manager support 53

Collect device health data and set the sample interval 60

Enable event log upload to Digi Remote Manager 63

Log into Digi Remote Manager 65

Use Digi Remote Manager to view and manage your device 66

Add a device to Digi Remote Manager 66

Configure multiple IX10 devices by using Digi Remote Manager configurations 67

View Digi Remote Manager connection status 68

Learn more 68

Interfaces

Wireless Wide Area Networks (WWANs) 70

Configure SureLink active recovery to detect modem failures 70

Configure the device to reboot when a failure is detected 80

Disable SureLink 87

Using cellular modems in a Wireless WAN (WWAN) 92

Configure a Wireless Wide Area Network (WWAN) 110

Show WWAN status and statistics 120

Delete a WWAN. 121

Local Area Networks (LANs) 124

About Local Area Networks (LANs) 125

Configure a LAN 125

Change the default LAN subnet 133

Change the LAN address type 134

Show LAN status and statistics 136

Delete a LAN 137

DHCP servers 139

Create a Virtual LAN (VLAN) route 156

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digi Routeur réseau

Digi

Digi TX54 Manuel utilisateur

Digi

Digi AnywhereUSB Series Manuel utilisateur

Digi

Digi TransPort WR11 XT Manuel utilisateur

Digi

Digi TransPort WR44 RR Manuel utilisateur

Digi

Digi TransPort LR54 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Digi

Digi EX40 Manuel utilisateur

Digi

Digi TransPort WR41 Manuel utilisateur

Digi

Digi TransPort LR54-AA401 Manuel utilisateur

Digi

Digi TransPort WR44 v2 Manuel utilisateur

Digi

Digi TransPort WR31 Manuel utilisateur

Digi

Digi TX40 Manuel utilisateur

Digi

Digi TransPort LR54 Manuel utilisateur

Digi

Digi Connect Series Guide de l'utilisateur

Digi

Digi XPressWireless Manuel utilisateur

Digi

Digi One TS W Manuel utilisateur

Digi

Digi TransPort WR44 R Manuel utilisateur

Digi

Digi Connect EZ 4 Manuel utilisateur

Digi

Digi CR4110 Manuel utilisateur

Digi

Digi 6330-MX Manuel utilisateur

Digi

Digi TX64 Manuel utilisateur

Digi

Digi TA2020B Manuel utilisateur

Digi

Digi XPress Manuel utilisateur

Digi

Digi TransPort WR64 Guide d'application

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur