Digi Opengear OPERATIONS MANAGER 2200 Manuel utilisateur

QUICK START GUIDE

OPERATIONS MANAGER 2200

Includes:

OM2216, OM2216-L, OM2224-24E, OM2224-24E-L, OM2224-24E-10G,

OM2224-24E-10G-L, OM2232, OM2232-L, OM2248, OM2248-L, OM2248-10G,

OM2248-10G-L, DDC

23.03 Mar 2023

This Quick Start Guide covers basic installation and configuration of the OM2200. For detailed guidance,

consult the Operations Manager User Guide: https://opengear.com/support/documentation/.

When you register, you:

lActivate your warranty.

lGet notified when firmware updates are released: https://opengear.com/support/device-updates/

WHAT'S IN THE BOX

OM2200 Device

Figure: OM2248-L model

1. Serial ports i

2. RJ45 serial console

3. Front USBports

4. NET1 andNET2 (1GSFP and Copper) ii

5. LEDindicators iii

6. USB serial console

7. Config erase button

8. SIMcard slots iv

9. Cell (main) iv

10. Cell (aux) iv

11. GPS iv v

12. USBserial ports

13. Dual ACpower supply vi

i. Number of serial ports varies per model. Integrated switch variation on next page.

ii. Combination network interfaces allow either SFPor Copper to be used. 10Gvariation on next page.

iii. LED definitions available in the Operations ManagerUser Guide.

iv. Cellular models only.

v. Not implemented.

vi. DualDC variation on next page.

Device Variations

Integrated Switch

OM2224-24Emodels have 24 serial ports (left) and 24 gigabit ethernet ports (right).

10GEthernet

10Gmodels have network interfaces NET1 (10G SFP+), NET2 (10GSFP+) and NET3 (1GCopper).

DualDCPower Supply (DDC)

DDCmodels have a dual DCpower supply.

Kit Contents

Note: Contents may be different from those pictured due to region or supplier.

Label Item Quantity Notes

OM2200 device 1

1 IECpower cables or DDC terminals (optional) 2 Region-specific

2 Rack mount screw kit 1

3 OM2200 rack ears 2

4Cisco straight pinout RJ45 to DB9F crossover serial

adapter 1 Part number 319015

5 CAT5e RJ45 UTPstraight cable - 5ft/1.5m 1 Part number 440016

6 4GLTE-APro Antennas 2 Part number 469042

Cellular models only

Table: List of contents

HARDWARE INSTALLATION

Step 1. Connect Network Interfaces

Connect the device to a local network using any of the available physical network interfaces. All interfaces

will receive a dynamic address via DHCPand DHCPv6.

Figure: Network interfaces for 1GbEthernet models Figure: Network interfaces for 10Gb Ethernet models

Additionally, the device can be accessed from a computer or local network via a static IPv4 address as

shown in Table: Default static interface connection.

Model Interface Static Address

1GbEthernet NET1 192.168.0.1/24

10GbEthernet NET3 192.168.0.1/24

Table: Default static interface connection

Firewall Zone Network Interfaces

WAN , NET3

LAN NET2

Table: Default firewall zones for interfaces

Step 2. Connect Cellular Antennas

For -L models, attach the included antennas or external mount to the CELL (MAIN) and CELL (AUX)

connectors.

If you have a data plan, insert a carrier-provided mini-SIM into the first SIMcardslot (slot 1) with contacts

facing upward.

Note: You will hear a click when it is correctly inserted.

Step 3. Connect Serial Devices

Connect managed devices to the serial interfaces on the front of the unit.

Step 4. Connect USB Devices

USBserial devices can be connected to the USBslots at the front and rear of the unit if required.

Note: The front USBslots are USB 3.0 and the rear USBslots are USB 2.0.

Step 5. Connect The Power

DDC

Figure: Dual power supply connectors for OM2200

AC only: Connect the power cable to the rear of the unit.

A second power cable can be connected if redundancy is

required. The power cables can be connected in any

order.

DDC option: Connect the DDC terminals to the DC power

cable (not supplied) and plug the DDC terminals into the

rear of the unit.

LEDPowerStatus Indicator

Figure: Power supply has redundancy Figure: Power supply does not have redundancy

ACCESS THE DEVICE

Step 1. Log in via the Web UI

Using a computer on the same subnet as the static network interface shown in "Hardware Installation" on

page5, access the web UI with your web browser at https://192.168.0.1/ .

Note: The device has a self-signed SSLcertificate. Your browser will display an "Untrusted

connection"warning. Click through the warning to access the login page.

To log in for the first time, enter the username root and password default and click Submit.

Step 2. Change Root Password

When logging in to the device for the first time you will be prompted to change the root password

immediately.

Enter the current password followed by the new password and click Log in.

The ACCESS > Serial Ports page appears displaying a list of connected serial devices and links to a

Web Terminal or SSH connection for each.

CONFIGURE SNMPPOWER ALERTS

Configure > SNMP Alerts > Power > Voltage

Configure the System Voltage Range alert to send an SNMPTRAPwhenever the system reboots or the

voltage on either power supply leaves or enters the user-configured voltage range.

For more details, consult the Operations Manager User Guide:

https://opengear.com/support/documentation/.

CONFIGURE SERIAL PORTS

To change settings for individual serial ports:

1. Navigate to CONFIGURE >Serial Ports.

2. Click the Edit button next to the port you wish to modify.

3. Change port settings, logging settings or configure IP aliases.

4. Click Apply to save changes.

Field Value

Mode ConsoleServer

Pinout X2

Baud Rate 9600

Data Bits 8

Parity None

Stop Bits 1

Table: Default configuration for serial ports

CONFIGURE LOCAL CONSOLE

CONFIGURE>Local Management Consoles

Operations Manager OM2200 units contain one RJ45 serial console and one micro-USB serial console.

Console Manager CM8100-10G units contain one RJ45 serial console.

To configure local console ports:

1. Navigate to CONFIGURE > Local Management Consoles.

2. Click the Edit button next to the local console you wish to modify.

3. Change port settings.

4. Click Apply to save changes.

Field Value

Baud Rate 115200

Data Bits 8

Parity None

Stop Bits 1

Emulation VT102

Table: Default serial port configuration for local console access

CONFIGURE NETWORK

CONFIGURE >Network Connections >Network Interfaces

Click to expand any row to display status information about the interface and its connections.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digi Matériel réseau

Digi

Digi ConnectCore 6 Guide rapide de l'utilisateur

Digi

Digi Digi CM 32 Manuel utilisateur

Digi

Digi ConnectCore 8X SBC Pro Guide rapide de l'utilisateur

Digi

Digi Connect EZ Mini Manuel utilisateur

Digi

Digi Edgeport 21 Manuel utilisateur

Digi

Digi One SP Manuel utilisateur

Digi

Digi SkyCloud Z4500 Series Manuel utilisateur

Digi

Digi Connect WAN Series Manuel utilisateur

Digi

Digi NetSilicon Connectware Connect Series Manuel utilisateur

Digi

Digi One SP Manuel utilisateur

Digi

Digi Connect ME Guide d'application

Digi

Digi XBee DigiMesh Manuel utilisateur

Digi

Digi ConnectCore 93 Guide rapide de l'utilisateur

Digi

Digi CM Manuel utilisateur

Digi

Digi Connect ME Guide rapide de l'utilisateur

Digi

Digi NS9750 Guide d'application

Digi

Digi Connectware CM Manuel utilisateur

Digi

Digi Connect ME 9210 Guide d'application

Digi

Digi Digi CM 32 Manuel utilisateur

Digi

Digi Connect ME Manuel utilisateur

Digi

Digi XPress Manuel utilisateur

Digi

Digi WB-10 Manuel utilisateur

Digi

Digi ConnectCore 6 Plus Guide rapide de l'utilisateur

Digi

Digi 9P 9360/9750 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur