Digi-tech RP500 Mise à jour du firmware

Software Installation Guide

Installs Cubase®LE 4, X-Edit, and USB Drivers

Table of ConTenTs

1. Congratulations................................................................................................................. 1

2. Computer Minimum Requirements ............................................................................. 1

3. Software Installation for Windows®Vista and XP Users ........................................ 1

A. Installing Software for Windows ...............................................................................1

B. Set Up Windows Audio and MIDI (Optional)........................................................2

C. Cubase®LE 4 Device Setup for Windows .............................................................3

4. Software Installation for Mac®Users........................................................................... 4

A. Installing Software for Mac .........................................................................................4

B. Cubase LE 4 Device Setup for Mac..........................................................................4

5. Recording With Cubase LE 4 (Windows and Mac) ................................................. 6

A. Creating a new project................................................................................................6

B. Setting the input of the track to record ................................................................7

C.To start recording ........................................................................................................9

1. CongraTulaTions

Congratulations on your purchase of the RP500.This guide contains the instructions on

installing and setting up Steinberg Cubase®LE 4 recording software, X-Edit™ Editor/

Librarian, and the required USB drivers for Windows®Vista,Windows XP or Mac®OSX

computer systems. Please follow these instructions carefully to ensure smooth installa-

tion of each of these components.

2. CompuTer minimum requiremenTs

Windows®Vista, XP Home, or XP Professional

Pentium 4/Athlon 1.4 GHz

512 MB RAM (1GB recommended)

Windows XP (SP 2 installed)

DVD-ROM drive

Internet access required for Cubase LE 4 license activation

Mac®

Power Mac G4 1 GHz or Core Solo 1.5 GHz

512 MB RAM

OS X Version 10.4 or later*

DVD-ROM drive

Internet access required for Cubase LE 4 license activation

* X-Edit™ Editor/Librarian is compatible with Mac OS X Version 10.5 operating systems only

when they are running on Mac Intel Core computer systems.

sofTWare insTallaTion for WinDoWs®

VisTa anD Xp users

a. insTalling sofTWare for WinDoWs

You must install the USB drivers to use your RP500’s USB connection with your com-

puter.You can then install and use the Cubase LE 4 and X-Edit applications.You can also

install Adobe®Reader®(if it isn’t already installed on your computer) which is necessary

to access Cubase LE 4 documentation. Follow the on-screen directions to successfully

install these items.

Close any open programs you have running on your computer and place the

RP500 Software DVD in your DVD-ROM drive.

The installer should automatically run. If it does:

XP users

Go to step 3.

Vista users

Select Run This Application.

If the Installer does not automatically run, select Start>Run (XP) or Start>All

Programs>Accessories>Run (Vista) and type in D:\RP500Install.exe

(where D:\ is the letter of your DVD ROM drive) and click OK.

Once the installer begins, the software installation menu will appear.

•

Click the “RP500 Drivers” button and follow the onscreen instructions to install

the necessary drivers for using X-Edit and Cubase.

Click the “X-Edit” button and follow the onscreen instructions to install the

X-Edit Editor/Librarian software. During the X-Edit installation, you may be

prompted to install Microsoft .NET 2.0 which is required to use the X-Edit

application. Agree to the terms and follow the onscreen instructions to install

.NET 2.0. Once the .NET installation is complete, continue with the X-Edit

installation.

Click the “Cubase LE 4” button and follow the onscreen instructions to install

Cubase. During the Cubase installation you may be prompted to install the

Syncrosoft License Control software.This is a license management application

that is used once you register Cubase at the Steinberg website. Agree to the

terms and follow the onscreen instructions to complete the Syncrosoft installa-

tion.

If you don’t have Adobe®Reader®installed on your computer, click the “Adobe

Reader” button and follow the onscreen instructions to install Adobe Reader.

You will be taken to Adobe’s website, where you can select and install the

appropriate version of Acrobat Reader for your computer. Adobe Reader must

be installed to view the Cubase LE 4 documentation.

Once installation is completed, continue to Section B - Setup Windows

Audio and MIDI to configure the newly installed software.

Note:When Cubase®LE 4 is first launched, it will be running in fully functional

demo mode for 30 days. Before the 30 day trial expires you will need to regis-

ter online at Steinberg’s website to receive an unlimited use license. Click the

“Register Now” button to visit the Cubase LE 4 website and follow the instruc-

tions there to register Cubase LE 4 and receive an activation key. When the

activation key is received via email, follow the instructions included in the email

to download and install it and enable unlimited use of LE 4.

b. seT up WinDoWs®auDio anD miDi (opTional)

When the USB Audio and MIDI drivers were installed,Windows may have automatically

selected them as your default audio and MIDI outputs. This means that your Windows

sounds will be sent to the RP500 rather than your computer’s sound card. We need to

check if these have been changed and return the settings to what they were before.

Select Start>Control Panel>Sounds and Audio Devices (XP) or

Hardware and Sound (Vista).

Select the Audio tab (XP) or Manage Audio Devices (Vista).

Under Sound Playback>Default device (XP), or Playback (Vista), make

sure your computer’s sound card is selected as the default device.

Under Sound Recording>Default device (XP), or Recording (Vista), make

sure your computer’s sound card is selected as the default device.

Under MIDI Music Playback>Default device, open the pull-down menu and

make sure Microsoft GS Wavetable Synth is selected as the default device (XP

only).

C. Cubase®le 4 DeViCe seTup for WinDoWs®

After the RP500 is connected to your computer and powered on, open Cubase

LE 4, and go to Devices>Device Setup as shown below.

Under Devices, click on VST Audio System and select RP500 ASIO from

the ASIO Driver pull-down menu if it is not already selected.

Click on Switch to switch the driver and click OK. You are now ready to begin

recording using your RP500 and Cubase LE 4.

4. sofTWare insTallaTion for maC®users

The RP500 hardware is designed to interface directly with your Mac®computer via USB

using OS X’s Core Audio drivers.This means no separate driver installation is needed as

long as your Mac system software is 10.4 or greater.

a. insTalling sofTWare for maC

Close any open programs you have running on your computer and place the RP500

Software DVD in your DVD-ROM drive.

When the RP500 Software window appears, double-click the Open Me icon.The

software installation menu will appear.

Click the “X-Edit” button and follow the onscreen instructions to install X-EditTM.

Click the “Cubase LE 4” button and follow the onscreen instructions to install

Cubase LE 4.

Note:When Cubase LE 4 is first launched, it will be running in fully functional demo

mode for 30 days. Before the 30 day trial expires you will need to register online

at Steinberg’s website to receive an unlimited use license. Click the “Register Now”

button to visit the Cubase LE 4 website and follow the instructions there to register

Cubase LE 4 and receive an activation key. When the activation key is received via

email, follow the instructions included in the email to download and install it and

enable unlimited use of LE 4.

b. Cubase®le 4 DeViCe seTup for maC

After the RP500 is connected to your computer and powered on, open Cubase

LE 4, and go to Devices>Device Setup as shown below.

Click VST Audio System and select DigiTech RP500 In/Out (2) as the

ASIO Driver (as shown below). DO NOT select DigiTech RP500 In/Out (1).

Cubase®LE 4 will now ask you if you would like to switch the driver. Select

Switch then OK.

Mac OS 10.4.x users only: After selecting RP500 In/Out (2) in the Device Setup

panel, you may need to verify that your device inputs are active. To do this, follow these

steps:

Select Device>VST Connections from the menu bar.

When the VST Connections panel appears, click the Inputs tab.

The box under the Audio Device column may say “Not Connected.” If it

does, click in this box and select DigiTech RP500 In/Out (2) to enable the

device inputs.

You are now ready to start recording with Cubase LE 4.

reCorDing WiTH Cubase®le 4 (WinDoWs®

anD maC®)

a. CreaTing a neW projeCT

1. Open Cubase®LE 4.

2. Click File and select New Project.

3. Select default and click OK.

4. Select a location to store the project (or use the default location) and click OK.You

may want to create a new folder for each new project.

5. (XP users only)

If you ever see the warning message shown below when opening a new or existing

project, you must reset the driver in the Device Setup dialog.To reset the driver, click

Devices > Device Setup, and click the Reset button.

b. seTTing THe inpuT of THe TraCk To reCorD

1. Click the Project menu and select Add Track > Audio.When the Add Audio Track

dialog appears, make sure the Configuration is set to Stereo and click OK.

2. Make sure the Show Inspector button , located in the upper left corner of the

screen is lit.

3. In the Audio 01 window, make sure the Record Enable button is lit.

4. In the Audio 01 window, make sure the Input Monitoring button is not lit.

Autres manuels pour RP500

Table des matières

Autres manuels digi-tech Pédale musicale

digi-tech

digi-tech RP360 XP Manuel utilisateur

digi-tech

digi-tech JAMMAN - MANUAL 2 Manuel utilisateur

digi-tech

digi-tech RP80 Manuel utilisateur

digi-tech

digi-tech HARDWIRE CM-2 Manuel utilisateur

digi-tech

digi-tech HARDWIRE CR-7 Manuel utilisateur

digi-tech

digi-tech MAIN SQUEEZE Manuel utilisateur

digi-tech

digi-tech Mosaic Manuel utilisateur

digi-tech

digi-tech The Jimi Hendrix Experience Manuel utilisateur

digi-tech

digi-tech TRIO Plus Manuel utilisateur

digi-tech

digi-tech HARDWIRE TL-2 Manuel utilisateur

digi-tech

digi-tech nautila Manuel utilisateur

digi-tech

digi-tech HARDWIRE TL-2 Manuel utilisateur

digi-tech

digi-tech GNX3 Manuel utilisateur

digi-tech

digi-tech Bass Whammy Manuel utilisateur

digi-tech

digi-tech Expression Factory EX-7 Manuel utilisateur

digi-tech

digi-tech Le Lyra Manuel utilisateur

digi-tech

digi-tech JAMMAN STEREO Manuel utilisateur

digi-tech

digi-tech RPX400 Manuel utilisateur

digi-tech

digi-tech GRUNGE Manuel utilisateur

digi-tech

digi-tech RP300 Manuel utilisateur

digi-tech

digi-tech Scott Ian Black-13 Manuel utilisateur

digi-tech

digi-tech TURBO FLANGE Manuel utilisateur

digi-tech

digi-tech HARDWIRE SP-7 Manuel utilisateur

digi-tech

digi-tech GENESIS3 Manuel utilisateur

Manuels Pédale musicale populaires d'autres marques

Behringer

Behringer ULTRA WAH UW300 Manuel utilisateur

Whirlwind

Whirlwind oc-bass Manuel utilisateur

Strymon

Strymon Lex-rotary Manuel utilisateur

Behringer

Behringer PB600 Manuel utilisateur

Lexicon

Lexicon MX200 Manuel utilisateur

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manuel utilisateur

Matthews Effects

Matthews Effects Whaler V2 Manuel utilisateur

Grid 1

Grid 1 Pedal Jeanie Manuel utilisateur

Amptweaker

Amptweaker tightboost Manuel utilisateur

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manuel utilisateur

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manuel utilisateur

BYOC

BYOC Analog Chorus Manuel

Dimavery

Dimavery EPVP-50 Manuel utilisateur

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manuel utilisateur

Pro-MIDI

Pro-MIDI G25 Manuel utilisateur

DW 7000 Manuel utilisateur

FAMC

FAMC Liquid-Foot Jr. Series Manuel utilisateur

Dimavery

Dimavery EPOD-50 Overdrive Manuel utilisateur

digi-tech RP500 Mise à jour du firmware

Manuels Pédale musicale populaires d'autres marques