Digi-Sense J Manuel utilisateur
Single-Input
Thermocouple
Thermometers
T
ype
J
, K, T
68X001351 Rev0 0717 1065DGMAN_91428-00,-01,-02
Instruction Manual
Single-Input
Thermocouple
Thermometers
Type J, K, T
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
T
A
BLE OF CONTENTS
1. INTRODUCTION....................................1
2. SAFETY PRECAUTIONS.......................2
3. SPECIFICATIONS..................................3
4. BATTERY INSTALLATION
AND REPLACEMENT ............................5
5. INSERTING AND REMOVING
RUBBER ARMOR ..................................6
6. ASSEMBLING OPTIONAL
HANDS-FREE ACCESORIES ................7
7. SELF TEST ............................................8
8. CONNECTING A THERMOCOUPLE......8
9. KEY FUNCTIONS.................................10
10. DISPLAY OVERVIEW ..........................11
11. SELECTING TEMPERATURE SCALE.12
12. HOLD FUNCTON.................................12
13. MIN AND MAX FUNCTION...................13
14. AUTO OFF FUNCTION........................13
15. CALIBRATION......................................13
16. CANCELING A FIELD
CALIBRATION......................................14
17. FIELD CALIBRATION LOCKOUT
AND RE-ENABLE.................................15
18. MAINTENANCE....................................16
19. CLEANING...........................................16
20. BATTERIES..........................................16
21. TROUBLESHOOTING..........................17
22. ACCESSORIES....................................18
23. WARRANTY.........................................20
24. PRODUCT RETURN............................20
25. INNOCAL® CALIBRATION AND
REPAIR SERVICES .............................21
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
- 1 –
1. INTRODUCTION
This versatile handheld
instrument provides
highly accurate
temperature
measurements. The
instrument is designed
for easy operation and
includes the following
features:
xOperator selection of Celsius
or Fahrenheit scale
xResolution of 0.1°C/F from
–199.9 to 999.9°
xLarge backlit LCD with two lines
of four-digit display
xHold feature for temporarily
retaining a reading
xDisplays Min and Max readings
xField calibration capability
xDisabling of Auto-Off function
xLow-battery warning
xTwo-blade female ANSI mini-
connector input
xOperates with a wide selection
of probes
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
- 2 –
2. SAFETY PRECAUTIONS
WARNING:
1. This instrument is designed to
accept low level signals supplied
by standard thermocouples. Under
NO circumstances should the input
voltage exceed the specified 50V
RMS.
2. To prevent ignition of a hazardous
atmosphere, batteries must only be
changed in an area known to be
nonhazardous.
CAUTION:
1. Do not use or store this instrument
in microwave ovens or any
abnormally hot or cold areas.
2.
Weak batteries should not be left in
the instrument. Dead batteries can
leak and cause damage to unit.
DANGER:
1. Voltages present at the
thermocouple may also be present
at the battery terminals. Always
disconnect the thermocouple
when changing batteries.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
- 3 –
3. SPECIFICATIONS
Thermocouple Thermometers
Type
Temperature
range
T
ype
J
–210°C
to
1200°C
(–346°F
to
2192°F)
T
ype
K
–250°C
to
1372°C
(–418°F
to
2501°F)
T
ype
T
–250°C
to
400°C
(–418°F
to
752°F)
Out-of-
ra
nge displa
y
:
-
-
-
-
Resolution:
0.1°/1° auto-ranging,
0.1°C/F from –199.9 to 999.9°,
1°C/F outside this range
Accuracy:
Below –150°C (–238°F):
±0.25% of reading ±1°C (±2 °F)
Above –150°C (–238°F):
±0.1% of reading ±0.4°C (±0.7°F)
Display:
Backlit LCD of viewing area 58 x 40mm
Min/Max function:
Yes
Auto Off (after 17.5 minutes):
Enable/disable option available
Stability criteria:
Yes, upon stability of 5 seconds
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
- 4 –
Display upda
te
rate:
0.5
sec
per
up
date
Inpu
t:
O
ne
thermocouple
wi
t
h
ANSI
conn
ector
Inpu
t
prote
ct
ion:
50V
rms
Storage:
–40°C to 65°C (–40°F to 149°F)
Humidity:
10% to 90% RH (noncondensing)
Battery life:
Size: Three AA, 1.5V; alkaline
Life: 750 hours continuous, typical,
(without backlighting)
Dimensions:
Without armor:
175mm (L) X 97mm (W) X 42mm (H)
With armor:
180mm (L) X 102mm (W) X 52mm (H)
Weight with batteries:
Without armor: 267g
With armor: 362g
Ingress protection:
Meets IEC-529 IP-54 for dust and water
resistant enclosures (probe attached)
CE Compliance
EN61326-
1/A1: 1998 (EU EMC Directive)
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
- 5 –
4. BATTERY INSTALLATION AND
REPLACEMENT
The total battery life without
backlighting is about 750 hours.
Each bar of the battery annunciator
represents 200 hours. A blinking
empty battery annunciator indicates
150 hours remaining.
Selected settings are stored in
memory and will remain in memory
even after power is turned off, or
while batteries are being replaced.
1.Before changing battery, turn
instrument off and disconnect
thermocouple.
2.Loosen screw and lift battery
cover off back of case.
3.Remove the three AA batteries.
4.Insert three new batteries
observing polarity.
5.Install cover and tighten screw.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
- 6 –
5. INSERTING AND REMOVING
RUBBER ARMOR
1.To insert thermometer into the
optional rubber armor, slide in from
the top of meter before pushing the
bottom edges of meter down to set
it into position. Lift up the stand at
the back of meter for bench top
applications if necessary.
2.To remove thermometer from
armor, push out from the bottom
edges of meter until it is completely
out of boot.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
- 7 –
6.
ASSEMBLING OPTIONAL
HANDS-FREE ACCESORIES
You can use the optional magnets and
strap in the Hands-Free Kit accessories
for hands-free operations.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
- 8 –
7. SELF TEST
Press the on/off key. The meter
performs a self-test and all display
digits and indicators, should remain
on for approximately one second.
The thermometer will then display
the thermocouple type and resume
to the measurement mode.
8. CONNECTING A
THERMOCOUPLE
Use the correct thermocouple type for
your instrument. Using an incorrect
thermocouple type will result in
erroneous readings. Thermocouples
are color
coded by type using the North
American ANSI Color Code as follows:
TYPE COLOR
J
Black
K Yello
w
T Blue
Thermocouple connectors have one
wide blade and one narrow blade.
Do not force connector in backwards.
Connect thermocouple to receptacle
at top of instrument as shown in the
following illustration:
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Digi-Sense Thermomètre
Digi-Sense
Digi-Sense 20250-34 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-07 Manuel utilisateur
Digi-Sense
Digi-Sense 91428-07 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-92 Manuel utilisateur
Digi-Sense
Digi-Sense DualLogR 91100-50 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-20 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-91 Manuel utilisateur
Digi-Sense
Digi-Sense Type K Manuel utilisateur
Digi-Sense
Digi-Sense 69202-30 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-32 Manuel utilisateur
Digi-Sense
Digi-Sense ThermoLogR 93410-50 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-25 Manuel utilisateur
Digi-Sense
Digi-Sense 93210-50 Manuel utilisateur
Digi-Sense
Digi-Sense 91100-00 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-07 Manuel utilisateur
Digi-Sense
Digi-Sense 92000-01 Manuel utilisateur
Digi-Sense
Digi-Sense 91428-06 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-91 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-09 Manuel utilisateur
Digi-Sense
Digi-Sense 20250-18 Manuel utilisateur
