DIEBOLD NIXDORF BEETLE/Multi IO Hub Gen.2 Manuel utilisateur

BEETLE /Multi IO Hub

Generation 2

User manual

01750354402A

DieboldNixdorf.com

Table of Content

1Manufacturer´s Certification .......................................................................................... 3

2Important notes................................................................................................................ 3

2.1 Safety Information....................................................................................................................... 3

2.2 System maintenance.................................................................................................................. 4

3Introduction...................................................................................................................... 5

3.1 About This Manual...................................................................................................................... 5

3.2 Warranty....................................................................................................................................... 5

3.3 Recycling...................................................................................................................................... 6

4Before Putting Into Service............................................................................................ 6

4.1 Checking the Scope of Supply.................................................................................................. 6

4.2 Setting up the Hub Gen.2 .......................................................................................................... 7

4.2.1 Horizontal ................................................................................................................................. 8

4.2.2 Vertical...................................................................................................................................... 9

5Exterior ........................................................................................................................... 10

6Interfaces........................................................................................................................ 11

6.1 COM a and COM b................................................................................................................... 12

6.2 COM c* and COM d* ................................................................................................................ 12

6.3 LAN (RJ45)................................................................................................................................. 13

6.4 LAN pass through (2x RJ45)................................................................................................... 14

6.5 USB-C 3.1 .................................................................................................................................. 14

6.5.1 USB-C Uplink......................................................................................................................... 15

6.5.2 USB-C 1 (DP) ........................................................................................................................ 15

6.6 USB-A 2.0................................................................................................................................... 15

6.7 USB-A 3.0................................................................................................................................... 15

6.8 PoweredUSB 2.0....................................................................................................................... 16

6.9 Cash drawer (RJ12).................................................................................................................. 16

6.10 Status LED................................................................................................................................. 17

6.11 Power supply (24 V DC in) ...................................................................................................... 18

6.12 Power supply (24 V DC out).................................................................................................... 18

6.13 Power supply (19 V DC out).................................................................................................... 18

7Cabling the BEETLE /Multi IO Hub Gen.2................................................................... 19

8Appendix......................................................................................................................... 20

8.1 Technical Data........................................................................................................................... 20

8.2 Block Diagram............................................................................................................................ 21

8.3 Total Current Consumption of Interfaces............................................................................... 22

8.4 Abbreviations............................................................................................................................. 23

8.5 Notes........................................................................................................................................... 24

01750354402A BEETLE /Multi IO Hub Gen.2 –User Manual 3

Manufacturer´s Certification

1Manufacturer´s Certification

This device meets the requirements of the EU Guidelines

2014/30/EU "Electromagnetic Compatibility" and 2014/35/EU “Low Voltage

Directive” and 2011/65/EU "Restriction of Hazardous Substances".

For this, it bears the CE label on the rear side or the icon is printed on the

packaging.

WARNING: This equipment is compliant with Class A of EN55032. In a

residential environment, this equipment may cause radio interference.

2Important notes

The device may be repaired only by authorized qualified personnel. Improper

repairs will lead to the loss of any liability claims.

2.1 Safety Information

The BEETLE /Multi IO Hub Gen.2 corresponds to the pertinent safety precautions

pertaining to data processing facilities.

–If this device is moved from a cold environment to its working environment,

condensation may occur. The device must be absolutely dry prior to commissioning,

therefore allow for an acclimatization time of at least two hours before putting it into

operation

–The external power supply unit is fitted with a safety-tested power cable. Only the

released 24 V/5 A power supply unit (see chapter "Checking the Scope of Supply")

which is connected to a properly grounded contactor contact socket is permitted to

be used.

–When installing the device, please ensure that the device plug-in fixture and the

protective contact electrical socket are easily accessible.

–The device must be fully disconnected from the supply voltage when performing

any work at the device and when inserting or removing data cables. To completely

disconnect the appliance from the mains voltage, switch off the device and unplug

the power plug of the power supply unit.

–USB devices may be connected to the system or removed from it during ongoing

operations if these devices comply with the specifications pursuant to usb.org.

Other peripherals (e.g. PoweredUSB printer) should not –for safety reasons –be

connected to or disconnected from BEETLE systems unless such systems are

switched off.

01750354402A BEETLE /Multi IO Hub Gen.2 –User Manual 4

–Before you begin any assembly work on the device, you should discharge yourself,

e.g. by touching a grounded object (such as a radiator).

–Please make sure that no objects (e.g. paperclips) are able to enter the inside of the

device, as this may result in electrical shocks or short circuits.

–No data cables may be plugged in or unplugged during storms.

–Protect devices from vibrations, dust, moisture and heat.

–Make sure that used parts are disposed of in a way that is environmentally

compatible.

–In the event of emergencies (e.g. damaged housing or damaged power cable,

penetration of liquids or foreign bodies), switch the device off immediately, pull the

power plug and inform the technical customer service of Diebold Nixdorf or the

authorized service partner of your dealer.

–Your BEETLE /Multi IO Hub Gen.2 is the result of state-of-the-art technical

innovation. Please ensure therefore equally state-of-the-art constructional and

technical ambient conditions to permit flawless and efficient functioning of the Multi

IO Hub Gen.2. You should connect the Multi IO Hub Gen.2 or any other IT system

only to power supply networks with separate protective conductors (PE).

–This type of power supply network is called a TN-S network. Do not use PEN

conductors! Please also observe the recommendations of DIN VDE 0100 part 540,

Annex C2. This will help you avoid any potential malfunctions.

2.2 System maintenance

Clean your system at regular intervals with a dry, lint-free cloth. For greater amounts of

soiling, please use a cleaning agent suitable for plastic surfaces, as can be ordered

from Diebold Nixdorf. Make sure that the device is deactivated during cleaning, that

the power plug is disconnected, and that no fluid enters the inside of the device.

01750354402A BEETLE /Multi IO Hub Gen.2 –User Manual 5

3Introduction

The BEETLE /Multi IO Hub Gen.2 provides a large number of classic peripheral

interfaces for the required devices and thus acts as a service point for each

individual POS workplace.

This means that the POS-specific peripheral devices are connected to the POS

system via the Multi IO Hub Gen.2 by only a single cable, by means of a USB-C

uplink cable.

In the event of error and replacement of the POS system, the entire peripheral

remains at the Multi IO Hub Gen.2. The replacement of the POS system is thus

accomplished exceptionally quickly.

No matter which configuration you may require, Diebold Nixdorf can provide you

with the correct solution.

In case of questions about your BEETLE /Multi IO Hub Gen.2 or other products and

solutions of Diebold Nixdorf, please visit us on the Internet.

3.1 About This Manual

The objective of this document is to aid you in the use of the system and also

enable you to use the Table of Contents to find the desired information quickly.

As the type and scope of the application programs depend on the individual

specific choice of each customer, this manual will not deal with any detailed issues

pertaining to software. Dedicated manuals are available for the peripherals that

can be connected. These devices will therefore not be described in detail here.

Please inform yourself by studying the respective manuals.

3.2 Warranty

In general, Diebold Nixdorf (DN) guarantees a warranty of 12 months after delivery or

acceptance date. This warranty covers all defects that have occurred during normal

use of the product.

NOTICE

Notes in the manual are marked by this symbol

CAUTION

Attention notifications are identified by this sign.

01750354402A BEETLE /Multi IO Hub Gen.2 –User Manual 6

Defects resulting from incorrect or inadequate maintenance, incorrect use or any

unauthorized changes to the product, unsuitable locations or unsuitable environments

are not covered.

More details about the warranty regulation can be found in your contract documents.

If no claim to product warranty exists and if you do not have a service contract with

Diebold Nixdorf, then the Customer Care Center (CCC) is available for accepting

orders without a contract.

Tel.: 0180 1 (Vanity Number, subject to a charge)

Tel.: 0180 1 1 99 2 99 (subject to a charge)

3.3 Recycling

This product was designed in accordance with our internal standard "Environmentally

friendly product design and development".

The system is manufactured without the use of CFC and CHC and the majority of

the components and materials used in production are recyclable.

You are helping us with the recycling if you do not attach any labels to the device.

For materials which currently cannot be used for a new purpose, Diebold Nixdorf

offers environmentally friendly disposal at a recycling center that is certified in

accordance with ISO 9001 and ISO 14001.

If your system can no longer be used, please send it in for this environmentally

friendly and contemporary form of recycling.

Additional information about returns, recycling and disposal of our products can be

obtained from your responsible branch office or from our recycling center in

Paderborn.

mailto:[email protected]

We look forward to your E-mail.

4Before Putting Into Service

4.1 Checking the Scope of Supply

Unpack the parts and check whether the scope of supply corresponds with the parts

listed on the delivery note.

The BEETLE /Multi IO Hub Gen.2 is in the box.

Should you detect any transport damages or inconsistencies between package

content and the delivery note, please inform your contractual partner or sales outlet of

Diebold Nixdorf immediately. Please specify delivery note number, delivery note item

number and serial number of the device when doing so.

01750354402A BEETLE /Multi IO Hub Gen.2 –User Manual 7

The serial number is located on the label next to the barcode.

The following parts should be considered for the operation of the Multi IO Hub Gen.2

when ordering:

D:CRNT-24V-V1 (01750266555) Power Supply 24 V/5 A

(is required only if not already available with DN BEETLE /A1xx0 POS system)

D:CRKB-D1-3M (01750341520) USB-C Cable, 3m

(uplink to DN BEETLE /A1xx0 system)

Alternative/optional available for ordering:

D:CRKB-1033 (01750301474) power supply cable, 3m

D:CRKB-1031 (01750283504) power supply cable, 5m

(for DN BEETLE /iPOS system)

D:CRKB-1032 (01750298073) power supply cable, 3m

(for AURES YUNO POS system)

We recommended keeping the original packaging for any subsequent transporting

(protection against jolts and impact).

4.2 Setting up the Multi IO Hub Gen.2

Fasten or set up the BEETLE /Multi IO Hub Gen.2 in such a way that the Hub Gen.2 is

not exposed to any extreme ambient conditions. Protect the Hub Gen.2 against

vibrations, dust, moisture, heat and strong magnetic fields.

Take care to ensure that you maintain a minimum distance of 50 mm (1.97 in.) around

the device.

01750354402A BEETLE /Multi IO Hub Gen.2 –User Manual 8

Use commercially available screws for the fastening which are adapted to the

subsurface. To fasten the Multi IO Hub Gen.2, use screws with a screw head diameter

of 5-8 mm (0.20-0.31 inches), with a shaft diameter of max. 4.2 mm (0.17 inches).

Even if you want to incorporate the device, it is mandatory that you adhere to the

specified minimum distances and ensure constant aeration and ventilation. The

immediate ambient temperature around the Multi IO Hub Gen.2 may not exceed 40°C.

4.2.1 Horizontal

On the underside can be found four rubber pads.

The BEETLE /Multi IO Hub Gen.2 can be fastened horizontally above or below.

Illustration 1: Horizontal installation, above

Illustration 2: Horizontal installation, below

01750354402A BEETLE /Multi IO Hub Gen.2 –User Manual 9

4.2.2 Vertical

In order to ensure that correct ventilation continues to be guaranteed, the following

minimum distances must be maintained for free convection, even with vertical setup.

Around all 5 sides of the device: 50 mm (1.97 inch)

You can fasten the suspended BEETLE /Multi IO Hub Gen.2 on either the left or the

right.

Illustration 3: Vertical installation

01750354402A BEETLE /Multi IO Hub Gen.2 –User Manual 10

5Exterior

The following illustration shows the BEETLE /Multi IO Hub Gen.2.

Front view

Rear view

Table des matières

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur