7
To Ensure Safe Use
WARNING
Connect to an electrical outlet that com-
plies with this machine’s ratings (for
voltage, frequency, and current).
Incorrect voltage or insufcient current may
cause re or electrical shock.
Rating Label
If sparks, smoke, burning odors, unusual
sounds, or abnormal operation occurs,
immediately unplug the power cord.
Never use if any component is damaged.
Continuing to use the machine may result in
re, electrical shock, or injury. Contact your
authorized Roland DG Corp. dealer.
Never use outside or in any location
where exposure to water or high humid-
ity may occur. Do not touch the power
cord, plug, or electrical outlet with wet
hands.
Doing so may result in re or electrical shock.
Danger of electrical short, electrical shock, or re
Position so that the power plug is within
immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency. In-
stall the machine next to an electrical outlet.
Also, provide enough empty space to allow
immediate access to the electrical outlet.
Do not use with any power supply other
than the dedicated AC adapter.
Use with any other power supply may lead
to re or electrical shock.
Never place any ammable object near
the machine. Never use a combustible
aerosol spray nearby. Never use in any
location where gases can accumulate.
Combustion or explosion could occur.
Handle the power cord, plug, and electri-
cal outlet correctly and with care. Never
use any article that is damaged.
Using a damaged item may result in re or
electrical shock.
When using an extension cord or power
strip, use one that adequately satises
the machine's ratings (for voltage, fre-
quency, and current).
Use of multiple electrical loads on a single
electrical outlet or use of a lengthy extension
cord may cause a re.
Never use the machine for any purpose
for which it is not intended, or use the
machine in an excessive manner that
exceeds its capacity.
Doing so may result in injury or re.
Danger of pinching, entanglement, and burns
WARNING
Securely fasten the milling tool and ma-
terial in place. After securing in place,
make sure no spanners or other articles
have inadvertently been left behind.
Otherwise, such articles may be thrown
from the machine with force, posing a risk
of injury.
Exercise caution to avoid being pinched
or becoming caught.
Inadvertent contact with certain areas may
cause the hand or ngers to be pinched or
become caught. Use care when performing
operations.
