DFI ED700-EHL Manuel utilisateur

ED700-EHL

Fanless Embedded System

User’s Manual

User's Manual | ED700-EHL

This publication contains information that is protected by copyright. No part of it may be repro-

duced in any form or by any means or used to make any transformation/adaptation without the

prior written permission from the copyright holders.

This publication is provided for informational purposes only. The manufacturer makes no

representations or warranties with respect to the contents or use of this manual and specifi-

cally disclaims any express or implied warranties of merchantability or fitness for any particular

purpose. The user will assume the entire risk of the use or the results of the use of this docu-

ment. Further, the manufacturer reserves the right to revise this publication and make changes

to its contents at any time, without obligation to notify any person or entity of such revisions or

changes.

Changes after the publication’s first release will be based on the product’s revision. The website

will always provide the most updated information.

Trademarks

Product names or trademarks appearing in this manual are for identification purpose only and

are the properties of the respective owners.

FCC and DOC Statement on Class A

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason-

able protection against harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio TV technician for help.

Notice:

1. The changes or modifications not expressly approved by the party responsible for com-

pliance could void the user’s authority to operate the equipment.

2. Shielded interface cables must be used in order to comply with the emission limits.

User's Manual | ED700-EHL

Table of Contents

Chapter 1 - Introduction................................................................................................................6

Overview - ED700-EHL ...........................................................................................................6

Front View ........................................................................................................................ 6

Side View ......................................................................................................................... 6

Dimensions ............................................................................................................................. 7

Key Features ........................................................................................................................... 7

Specifications ......................................................................................................................... 8

Chapter 2 - Hardware Installations............................................................................................10

Removing the Chassis Cover ..............................................................................................10

Bottom View .................................................................................................................10

Installing an Antenna ...........................................................................................................11

Expansion Slots....................................................................................................................12

Installing the M.2 Module .............................................................................................12

Installing the SO-DIMM Module ...................................................................................13

Mounting Options.................................................................................................................14

Chapter 3 - System Settings ......................................................................................................15

Pin Assignment ....................................................................................................................15

DC-in ...............................................................................................................................15

COM1 & COM2...............................................................................................................15

Chapter 4 - BIOS Settings...........................................................................................................16

Overview ...............................................................................................................................16

Main.......................................................................................................................................17

Advanced .............................................................................................................................17

RC ACPI Configuration..................................................................................................18

CPU Configuration.........................................................................................................18

Power & Performance ...................................................................................................19

PCH-FW Configuration ..................................................................................................19

Trusted Computing........................................................................................................20

NCT6126D Super IO Configuration ..............................................................................20

NCT6126D Super IO Configuration ►Serial Port 1,2 Configuration ...................21

NCT6126D Super IO Configuration ►Serial Port 3,4 Configuration ...................21

NCT6126D HW Monitor ................................................................................................22

NCT5525D HW Monitor ►Smart FAN Function .................................................22

Serial Port Console Redirection ...................................................................................23

Serial Port Console Redirection ►Console Redirection Settings........................23

USB Configuration .........................................................................................................24

Network Stack Configuration........................................................................................24

USB Power Control........................................................................................................25

Chipset ..................................................................................................................................26

Graphics Configuration .................................................................................................26

PCH-IO Configuration ....................................................................................................27

PCH-IO Configuration ►PCI Express Configuration...........................................27

PCH-IO Configuration ►SATA Configuration.....................................................28

PCH-IO Configuration ► Audio Configuration ....................................................28

Security .................................................................................................................................29

Secure Boot....................................................................................................................29

Boot .......................................................................................................................................30

Save & Exit ............................................................................................................................30

Updating the BIOS................................................................................................................31

Notice: BIOS SPI ROM..........................................................................................................31

User's Manual | ED700-EHL

About this Manual

This manual can be retrieved from the website.

The manual is subject to change and update without notice, and may be based on editions that

do not resemble your actual products. Please visit our website or contact our sales representa-

tives for the latest editions.

Warranty

1. Warranty does not cover damages or failures that arises from misuse of the product,

inability to use the product, unauthorized replacement or alteration of components and

product specifications.

2. The warranty is void if the product has been subjected to physical abuse, improper

installation, modification, accidents or unauthorized repair of the product.

3. Unless otherwise instructed in this user’s manual, the user may not, under any circum-

stances, attempt to perform service, adjustments or repairs on the product, whether

in or out of warranty. It must be returned to the purchase point, factory or authorized

service agency for all such work.

4. We will not be liable for any indirect, special, incidental or consequential damages to

the product that has been modified or altered.

About this Package

The package contains the following items. If any of these items are missing or damaged,

please contact your dealer or sales representative for assistance.

• 1 ED700-EHL System Unit

• Wall Mount Bracket

• Adapter (Optional)

• Power Cord (Optional)

Note: The items are subject to change in the developing stage.Note: The items are subject to change in the developing stage.

The product and accessories in the package may not come similar to the information listed

above. This may differ in accordance with the sales region or models in which it was sold. For

more information about the standard package in your region, please contact your dealer or

sales representative.

User's Manual | ED700-EHL

Static Electricity Precautions

It is quite easy to inadvertently damage your PC, system board, components or devices even

before installing them in your system unit. Static electrical discharge can damage computer

components without causing any signs of physical damage. You must take extra care in han-

dling them to ensure against electrostatic build-up.

1. To prevent electrostatic build-up, leave the system board in its anti-static bag until you

are ready to install it.

2. Wear an antistatic wrist strap.

3. Do all preparation work on a static-free surface.

4. Hold the device only by its edges. Be careful not to touch any of the components, con-

tacts or connections.

5. Avoid touching the pins or contacts on all modules and connectors. Hold modules or

connectors by their ends.

Safety Precautions

• Use the correct DC / AC input voltage range.

• Unplug the power cord before removing the system chassis cover for installation or

servicing. After installation or servicing, cover the system chassis before plugging in

the power cord.

• There is danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent specifications of batteries recommend by

the manufacturer.

• Dispose of used batteries according to local ordinance.

• Keep this system away from humid environments.

• Make sure the system is placed or mounted correctly and stably to prevent the chance

of dropping or falling may cause damage.

• The openings on the system shall not be blocked and shall be kept in distance from

other objects to make sure of proper air ventilation to protect the system from over-

heating.

• Dress the cables, especially the power cord, so they will not be stepped on, in contact

with high temperature surfaces, or cause any tripping hazards.

• Do not place anything on top of the power cord. Use a power cord that has been ap-

proved for use with the system and is compliant with the voltage and current ranges

required by the system’s electrical specifications.

• If the system is to be unused or stored for a long time, disconnect it from the power

source to avoid damage by transient overvoltage.

• If one of the following occurs, consult a service personnel:

- The power cord or plug is damaged.

- Liquid has penetrated the system.

- The system has been exposed to moisture.

- The system is not working properly.

- The system is physically damaged.

• The unit uses a three-wire ground cable which is equipped with a third pin to ground

the unit and prevent electric shock. Do not defeat the purpose of this pin. If your outlet

does not support this kind of plug, contact your electrician to replace the outlet.

• Disconnect the system from the electricity outlet before cleaning. Use a damp cloth

for cleaning the surface. Do not use liquid or spray detergents for cleaning.

• Before connecting, make sure that the power supply voltage is correct. The device is

connected to a power outlet which should be grounded connection.

Important:

Electrostatic discharge (ESD) can damage your processor, disk drive and other

components. Perform the upgrade instruction procedures described at an ESD

workstation only. If such a station is not available, you can provide some ESD pro-

tection by wearing an antistatic wrist strap and attaching it to a metal part of the

system chassis. If a wrist strap is unavailable, establish and maintain contact with

the system chassis throughout any procedures requiring ESD protection.

The system may burn fingers while running.

Wait for 30 minutes to handle electronic parts after power off.

Chapter 1

INTRODUCTION

User's Manual | ED700-EHL

Front View Side View

Chapter 1 - Introduction

X Overview - ED700-EHL

USB 3.0

LAN (2.5G)

LAN

COM 1 & 2

Antenna Holes

DC-in (9~36V)

VGA

134

SIM Slot

USB 2.0

Antenna Holes

Chapter 1

INTRODUCTION

User's Manual | ED700-EHL

X Dimensions X Key Features

5G Connectivity:

Support 5G Sub-6 module

WiFi 6 Connectivity:

Support WiFi 6 module

2.5GbE TSN:

Support 1 x 2.5GbE TSN , 3 x GbE LAN

Wide Operating Temperature:

Operating temperature: 0 to 60°C

-40 to 60°C (Supported by Intel®Embedded Series )

Chapter 1

INTRODUCTION

User's Manual | ED700-EHL

X Specifications

SYSTEM Processor Intel®Atom®Processors X Series, BGA 1493, Intel PC Client Series

Intel®Celeron®J6412 4 cores, 2.0 to 2.6 GHz, TDP 10W, Tj 0 to 105°C

Intel®Celeron®J6413 4 cores, 1.8 to 3.0 GHz, TDP 10W, Tj 0 to 105°C

Intel®Embedded Series

Intel®Atom®x6211E 2 cores, 1.3 to 3.0 GHz, TDP 6.5W, Tj -40 to 105°C

Intel®Atom®x6413E 4 cores, 1.5 to 3.0 GHz, TDP 9W, Tj -40 to 105°C

Intel®Atom®x6425E 4 cores, 2.0 to 3.0 GHz, TDP 12W, Tj -40 to 105°C

Memory 4GB/8GB DDR4 Memory onboard

Total Memory up to 32GB

One 260 pin DDR4 SODIMM up to 3200MHz

(in-band ECC support in embedded/industrial SKU)

BIOS AMI SPI 256Mbit (supports UEFI boot only)

GRAPHICS Controller Intel®UHD Graphics for 10th Gen Intel®Processors

Feature OpenGL 4.5, DirectX 12, Open CL 1.2, Vulkan 1.1

HW Decode: AVC/H.264, MPEG2, VC1/WMV9, JPEG/MJPEG, HEVC/H.265, VP8, VP9

HW Encode: AVC/H.264, JPEG/MJPEG, HEVC/H.265, VP9

Display 1 x VGA

VGA: resolution up to 2560x1600@60Hz

STORAGE Internal 1 x M.2 2280 (SATA)

eMMC eMMC 16GB/32GB

EXPANSION Interface 1 x M.2 2230 (USB/PCIe)

1 x M.2 3042/3052 (USB 3.0/PCIe) with dual SIM

AUDIO Audio Codec ALC262

ETHERNET Controller 2 or 3 x Intel®Ethernet Controller I210/I211 GigE LAN

1 x Intel®Ethernet 2.5GigE LAN

LED Indicators 1 x Power LED 1 x HDD LED

1 x WiFi LED

1 x 4G/5G LED

2 x COM LED

8 x DIO LED

Chapter 1

INTRODUCTION

User's Manual | ED700-EHL

TOP I/O USB 2 x USB 2.0

Antenna Hole 4 x antenna opening for 4G/5G/GPS

SIM slot Dual SIM

FRONT I/O Ethernet 2 or 3 x GbE (RJ-45) (configuration options)

1 x 2.5GbE TSN RJ45

1 x Allxon OOB Enabler (by request)

Serial 2 x RS232/422/485

USB 2 or 4 x USB 3.1 (configuration options)

Display 1 x VGA

DIO 8-bit DIO (jumper switch to COM)

Antenna Hole 2 x antenna opening for WiFi

WATCHDOG TIMER Output & Interval System reset, programmable via software from 1 to 255 seconds

SECURITY TPM TPM 2.0 (configuration options)

POWER Type Wide range 9~36V

RTC Battery RTC battery CR2032

Connector 3-pole terminal block 2-pin power extension switch onnector

OS SUPPORT Microsoft Windows 10 IoT Enterprise 64 Bit

Linux Ubuntu 20.04

ENVIRONMENT Operating Temperature 0 to 60°C

-40 to 60°C (Supported by Intel®Embedded Series )

Storage Temperature -40 to 85°C

Relative Humidity 10 to 90% RH (non-condensing)

MECHANICAL Construction Aluminum + Metal

Mounting Wall/DIN rail mount

Dimensions (W x H x D) 72 x 172 x 118.2 (mm)

Weight 1.5kg

STANDARDS AND

CERTIFICATIONS Shock Operating: 3G, 11ms

Non-Operating: 5G, 11ms

Vibration Operating: Random 5~500Hz, IEC68-2-64 (3G)

Non-Operating: Sine 10~500Hz, IEC68-2-6 (3G)

Certifciation CE, FCC, RoHS

Chapter 2

HARDWARE INSTALLATION

User's Manual | ED700-EHL

Chapter 2 - Hardware Installations

X Removing the Chassis Cover

Please observe the following guidelines and follow the instructions to open the system.

Make sure the system and all other peripheral devices connected to it have been

powered off.

2. Disconnect all power cords and cables.

Bottom View

Step 1:

The 5 screws on the bottom of the system are used to secure the cover to the chassis. Remove

the screws and put them in a safe place for later use.

Step 2:

Lift the cover to open the system.

Step 3:

The board can be easily accessed after the chassis cover is removed.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DFI Matériel réseau

DFI

DFI ED700-EHL22I Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur