Dension BTA1500 Manuel utilisateur
1www.dension.com
USER MANUAL
Dension BTA1500
Bluetooth Module
DEBTA-9201-2
2 www.dension.com
USER MANUAL - BTA1500
Contents
1. Introduction .......................................................................................... p.2
Useful Information ................................................................................ p.2
3. Package contents ................................................................................... p.3
4. Car compatibility ................................................................................... p.3
5. Basic installation ................................................................................... p.3-4
5.1 Installing the BTA1500
5.2 Positioning the microphone
6. Pairing ..................................................................................................... p5-6
6.1 Porsche
6.2 BMW
6.3 Audi
-----------------------------------------------------------------------------------------------------------------
1. Introduction
BTA1500 is an optional Bluetooth Accessory kit for the Gateway 500 devices. It supports
Advanced Audio Distribution Profile (A2DP) / Audio/Video Remote Control Profile
(AVRCP) profiles for audio playback and Hands-Free Profile (HFP) / Handset Profile
(HSP) for handsfree telephony.
BTA1500 is compatible with most Bluetooth-equipped mobile phones, PDAs, media
players and other devices. However, Bluetooth compatibility varies by manufacturer and
you might find that some functions are not supported with your specific device. For more
information, please visit http://support.dension.com.
-----------------------------------------------------------------------------------------------------------------
2. Useful Information
•Up to three phones can be paired with the BTA1500, one after the other. If a fourth
phone is paired, the pairing data from the last mobile phone on the list is deleted.
•If the system is playing A2DP music from the connected Bluetooth device (PDA,
laptop, mobile phone) you can still use it or another device in handsfree mode, to
answer phonecalls for example. Whilst the call is active, the music will stop. After the
2.
3 www.dension.com
call, the music will continue. Some mobile phone models will restart the song from the
beginning.
•If a phone is connected to the system as a handsfree device, the other phone can
connect only as an A2DP source. In this case, the device which is playing music can
be used as a phone but without the handsfree function. Some phones give you the
option to choose the connection type.
•If an iPhone is connected to the GW500 via the dock cable and the music is being
played from it, the iPhone can manage handsfree calls through Bluetooth. Whilst a call
is active the music will be stopped. After the call, the music will continue.
-----------------------------------------------------------------------------------------------------------------
3. Package contents
•BTA1500 device
•Microphone with clip
•Jack fixture
•User guide
-----------------------------------------------------------------------------------------------------------------
4. Car compatibility
•Porsche with PCM 2/2.1 head units, where the ‘Phone’ button exists
•Audi with MMI-2 head unit
•BMW 1/3/5/6/X5 (non iDrive-4 system)
Check www.dension.com for updates.
-----------------------------------------------------------------------------------------------------------------
5. Basic installation
5.1 Installing the BTA1500
For best performance, mount the BTA1500 to a plastic part of the vehicle, or tie it to a
cable harness away from the car radio chassis or other electronic equipment. Avoid
installing the BTA1500 near large metal objects.
•Mercedes (NTG1 and NTG2)
- with Audio 20 head unit
- with Comand head unit
Note The original Phone module and the BTA1500 cannot de used at the same time.:
If you want to use the BTA1500 you have to disconnect the original / factory phone module.
4 www.dension.com
*DWHZD\
*DWHZD\*DWHZD\
*DWHZD\
5DGLR
5DGLR5DGLR
5DGLR
iPod
iPod
%7$
%7$%7$
%7$
Microphone
Miic BTA
1. Make sure the phone module functionality is enabled on the car and remove any pre-
installed phone module
2. Connect the iPod dock cable to device port 1 (DP1) on the Gateway 500 (if you are
using the BTA1000, you’ll need to disconnect it from device port 1 first)
3. Download the latest Gateway 500 firmware (FW) from www.dension.com
4. Connect the BTA1500 to the device port 2 (DP2)
5. If you want to use the BTA1500 for handsfree telephony, connect the microphone to
the BTA1500 mic port (3.5mm connection). Refer to 3.2 for positioning the
microphone
6. Do not connect any mute cables between BTA1500 and the audio system of the car
7. When you switch on the BTA1500 for the first time, turn ignition/car off until the
5.2 Positioning the microphone
•For optimum handsfree performance, position the microphone as close to the driver’s
mouth as possible, but at the same time in a central location, i.e. an equal distance
from the left and right speakers. Ideally, clip the microphone to an overhead panel at
the top of the windscreen, for example, near the interior light.
•When using BTA1500 for hands-free operation, ideally set the volume to a moderate
level to avoid feedback.
•We recommend setting your phone volume to a similar volume as the other audio
sources connected to the Gateway. Do this on your phone.
blue LED on the AUX box stops lighting so the MOST ring shuts down.
Then turn the system on again.
Gateway 500
R a d i o
DP1
BTA 1500
Microphone
Mic DP2
iPod
5 www.dension.com
Before using your Bluetooth hands free functions, you need to pair your phone to
the BTA 1500. This only needs to be done once after installation.
6. Pairing
‘System error: Phone not available.’ Press ‘Confirm’. You can now proceed.
he Bluetooth handsfree communication will be turned off.
the radio and select ‘Phone On’ from the menu
In the place of the network operator name, ‘Pairing’ will be displayed. The Gateway
will be in pairing mode for one minute
Enable Bluetooth on your phone and search for audio devices (refer to your phone’s
user manual for details)
Select ‘DENSION-BTA’ and connect using the default PIN ‘0000’
After successful connection, the phone’s name will appear on the car audio system
display. It is now ready to use via the car radio controls
Please note that the following phone menu items are displayed by the Porsche car
audio device and cannot be updated by the Gateway:
•Important no.
•Dialled calls
•Received calls
•Missed calls
To call a number from the phonebook or to navigate inside the phonebook structure,
(ABC-Search function) use the green button on the top-left corner of the PCM
‘Phone Off’ will disable Bluetooth
If ‘Phone On’ is selected the Gateway will go into pairing mode. In the phonebook
menu you can reach the list of the connected phones:
•New phone can be added with a new pairing/connection procedure
•Any device can be deleted by choosing the ‘Delete’ item on the PCM. Any
phone on the list can be connected if the green button is pressed on the name of
the device.
Please note that the Phonebook (or the list of paired devices) is not valid until the
‘Synchronising Phone Book…’ text is shown on the bottom of the PCM display
6.2. BMW
When fitted in a BMW, the BTA1500 provides all of the same functions as the factory-
fitted version. Please refer to your car’s owner’s manual for a full list.
When you turn on the system at the first time, the Bluetooth handsfree communication
Enable Bluetooth on your phone and search for audio devices (refer to your phone’s
user manual for details)
Select ‘DENSION-BTA’ and connect using the default PIN ‘0000’
At first startup t
Press the TEL button on
is switched off. In order to enable it and carry out the pairing process follow the
owners manual of your car. The Gateway500 will be in pairing mode for one minute
‘
’
’
Every time you turn on the system, the following warning message will be displayed:
1. If it is needed, enable the factory Bluetooth module with a diagnostic computer.
2.
3.
4.
5.
6.
7.
8.
9.
10.
6.1. Porsche
1. If it is needed, enable the factory Bluetooth module with a diagnostic computer.
2.
3.
4.
6 www.dension.com
After successful connection, the phone’s name will appear on the car audio system
display. It is now ready to use via the car audio system
The BTA1500 module fitted in AUDI car models can give you a limited set of functions
compared to the factory fitted module. In order to carry out the pairing process do the
following:
1. Choose the CDC menu and‘Disc 6’ on the Audi car audio system, then enter the
2. Choose ‘BT Audio’ and select the pairing item. The Gateway 500 will be in pairing
mode for one minute
3. Enable Bluetooth on your phone and search for audio devices (refer to your phone’s
user manual for details)
4. Select ‘DENSION-BTA’ and connect using the default PIN ‘0000’
5. After successful connection, the phone’s name will appear on the car audio system
display. It is now ready to use via the car audio system
Please visit www.dension.com for further product information.
‘>Source’ folder
5.
6.3. Audi
Table des matières
Autres manuels Dension Matériel réseau
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
