3
Features
Rear Panel
1. Power Input: Insert the included power cable here to
power the unit.
2. Fuse: If the fuse is broken, disconnect the power
cord from the power outlet, and then unscrew this
holder to replace the fuse. Replace it with a fuse with
an appropriate rating (printed under on the rear
panel). Using a fuse with an incorrect rating can
damage the product and/or fuse.
3. Power Switch: Use this switch to power Lectern
Active on or off.
4. Power Light: This light will illuminate when Lectern
Active is powered on.
5. AC Outlet: Connect other devices here. The AC
outlets work when wall power is connected.
Top Panel
1. Mic Volume: Turn this knob to adjust the volume of
the microphone. When the knob is at the minimum
position, the internal speaker will be muted.
2. Aux Input (1/8” / 3.5 mm):Connect a CD player,
digital media player, or other audio source to this
1/8” (3.5 mm) stereo auxiliary input. Control the
volume using the Aux Volume knob.
3. Aux Input (RCA):Connect a CD player, digital media
player, or other audio source to these RCA auxiliary
inputs. Control the volume using the Aux Volume
knob.
4. Aux Volume: Turn this knob to adjust the input
volume of the aux inputs.
5. Output (XLR):Connect this XLR output to another
active (powered) speaker. The level of the output is
controlled by the Mic Volume and Aux Volume knobs.
When connected, the internal speaker will be muted.
6. USB Charging Port: Connect your device’s charge
cable here to charge it. USB charging only functions
when the unit’s power is turned on.
1
23
4
55
1
23
4
6
5
