DEMON ELECTRIC ESCAPE Manuel utilisateur

ESCAPE

Installation Manual

Scan to watch

assembly video

OWNER’S MANUAL

Table of contents

First of all, we would like to thank you for choosing the ESCAPE electric bike.

We warmly welcome you to our Demon Electric family. We wish you enjoy the numerous kilometers and

happy moments with your new bike.

After the initial shipment we have made many improvements and modiﬁcations for the ESCAPE including:

•

Suspended seat post - Takes the shock out of the big bumps, without the cost or complexity of suspension.

Adjustable handlebar stem- Provides up to 1 1/2” of rise and reach adjustment, for fully customizable

riding position.

Upgraded Shimano derailleur- Rigid cast aluminum construction gives smoother, more precise shifting.

New gearing, with taller top gear for relaxed touring, plus a lower low gear for tight, technical riding.

Demon Electric E-Bikes can be upgraded with additional accessories, such as water bottle holders, phone

mounts, etc.

ASSEMBLY INSTRUCTIONS ......................................................................................................3

INSTALL KICKSTAND .....................................................................................................................4

INSTALL HEADLIGHT AND FENDER .......................................................................................5

INSTALL FRONT WHEEL ..............................................................................................................6

INSTALL HANDLE BARS ...............................................................................................................7

INSTALL PEDALS .............................................................................................................................8

INSTALL SEAT.....................................................................................................................................9

CONNECT CONNECTORS ...........................................................................................................9

REMOVING BATTERY .................................................................................................................10

BATTERY CHARGING ...................................................................................................................11

BATTERY CHARGING TIPS ........................................................................................................11

OPERATION ......................................................................................................................................11

DISPLAY ............................................................................................................................................12

FEATURES ........................................................................................................................................12

TFT SCREEN INSTRUCTIONS .................................................................................................13

ERROR CODE DEFINE .................................................................................................................20

WARNINGS AND SAFETY .........................................................................................................21

BELOW ARE THE GUIDELINES FOR THE INITIAL

BATTERY CHARGING PROCESS:

• Before using the e-bike for the ﬁrst time, we strongly recommend that you conduct a preliminary battery

check-up and perform a full charge for optimal performance.

• To charge the battery, before riding connect the e-bike to the charger and allow the battery to reach full

capacity. According to the manufacturer’s instructions, the initial charge typically takes between 48 to 72

hours prior to your ﬁrst ride.

• During the charging process, keep an eye on the LED indicator or display on your battery charger. This will

give you insights into the charging progression. If you encounter any problems, don’t hesitate to reach out to

the manufacturer for assistance.

• After the battery has been fully charged, it’s recommended to take your e-bike out for a test ride. Pay at-

tention to its performance, including the speed, range, and power-assistance levels. Any signiﬁcant discrep-

ancies might imply that the battery capacity is compromised and needs further attention.

• Even when the e-bike is not being used frequently, it’s crucial to regularly charge and discharge the bat-

tery. This practice helps to prevent battery degradation during periods of storage.

Email us at [email protected]

Escape Manual |

IMPORTANT

Electric Bikes can be dangerous to use. The user or consumer assumes all risk of personal injuries, damage,

or failure of the bicycle or system and all other losses or damages to themselves and others and to any

property arising as a result of using the bicycle.

As with all mechanical components, the bicycle is subjected to wear and high stresses. Diﬀerent materials

and components may react to wear or stress fatigue in diﬀerent ways.

If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider.

Any form of crack, scratches or change of coloring in highly stressed areas indicate that the life of the com-

ponent has been reached and it should be replaced.

Please do not hesitate to contact us. If any problems may occur, please email us at customersupport1@

pdintl.ca for any customer service solutions such as replacement parts, technical information, and any other

issues.

All new E-Bike purchases come with a 2-year warranty, the warranty card must be ﬁlled in and

registered in order to qualify for warranty.

For any other commercial or general inquires please contact Demon Powersports at 905 881 9510 or

Email us at [email protected]

DO NOT DISASSEMBLE, MODIFY OR

REPLACE ELECTRICAL PARTS.

PLEASE NOTE: THIS MANUAL IS NOT INTENDED

AS A DETAILED USER, SERVICE, REPAIR OR

MAINTENANCE MANUAL. PLEASE SEEK

ASSISTANCE FROM A QUALIFIED TECHNICIAN FOR

SERVICE, REPAIRS OR MAINTENANCE.

Escape Manual |

ASSEMBLY INSTRUCTIONS

Your bike has been pre-assembled and requires only a few simple steps to get it ready for you to ride:

Remove the outside carton after cutting the nylon bands. Remove all the inside cardboard protection and

bubble wrap. Carefully remove your bike from the carton and gently rest it in place. Be careful not to cut

any wires when cutting the zip ties.

Remove brake pad holders when installing, avoid squeezing the brakes when removing the pad holder.

Ensure the following pieces are included in the package. If there are any missing parts, please contact

Demon for help replacing missing pieces.

iv) Pedals

i) Bike

v) Charger

ii) Front Wheel iii) Front Fender

vi) Assembly Tools

vii) Key for Battery viii) Kickstand ix) Seat

3 mm

10 mm

15 mm

8 mm

13 mm

4 mm

5 mm

6 mm

Wrench

Set

Screw

Driver

Allen Key

Set

Escape Manual |

INSTALL KICKSTAND

Install kickstand with the 5mm Allen key.

Ensure kickstand is behind the bracket on the left side of the bike during installation.

Bracket on left

side of the bike.

Turn bolts clock-wise to tighten.

5 mm

Escape Manual |

Install fender support to the bracket on the fork using the 4 mm allen key and 8 mm wrench.

INSTALL HEADLIGHT AND FENDER

Install the headlight and fender to the front fork with the given long bolt and nut, tighten with the 5mm Allen

key and 10mm wrench.

5 mm

4 mm

10 mm

8 mm

Long bolt

fender support

Nut

Escape Manual |

INSTALL FRONT WHEEL

Install the front wheel on the front fork, make sure to align the brake disk with the brake caliper, Avoid

squeezing brakes and ensure the brake disc is not rubbing against the wheel.

Fasten the wheel hub using the accompanying screws and washers.

Remove screws before installing wheel to front fork. Re-connect

screws in the same order once wheel is properly ﬁtted into place.

Tighten screws with 15mm wrench.

15 mm

Escape Manual |

INSTALL HANDLEBAR

Align the stem with the front wheel, then ﬂip open hinged cap on the stem. Tighten the stem bolt with the 5

mm allen key. Ensure there is no up and down play between the suspension fork and the frame tube.

Rotate the handlebar at a comfortable angle, then tighten the long bolt on the stem with the 5mm allen key

to secure the handlebar.

6 mm

5 mm

Escape Manual |

INSTALL PEDALS

Using the 15mm wrench provided in the toolkit, attach, and tighten the pedals. PLEASE NOTE – The pedals

are marked “L” for Left and “R” for Right.

L R

The left pedal is attached by turning it counter clockwise and the right pedal is tightened by turning it clock-

wise. Make sure the pedals are tightly attached to the crank arms to prevent stripping.

(See picture below)

15 mm

Firmly tighten tighten the two side bolts on the stem using the 5mm allen key, make sure there is no play in

the whole assembly.

5 mm

Table des matières

Autres manuels DEMON ELECTRIC Vélo

DEMON ELECTRIC

DEMON ELECTRIC REBEL Manuel utilisateur

DEMON ELECTRIC

DEMON ELECTRIC TRONIO Manuel utilisateur

DEMON ELECTRIC

DEMON ELECTRIC 6IX Manuel utilisateur

DEMON ELECTRIC

DEMON ELECTRIC BLACKTAIL Manuel utilisateur

DEMON ELECTRIC

DEMON ELECTRIC PILOT Manuel utilisateur

DEMON ELECTRIC

DEMON ELECTRIC THUNDERBOLT SL Manuel utilisateur

DEMON ELECTRIC

DEMON ELECTRIC PHANTOM Manuel utilisateur

DEMON ELECTRIC

DEMON ELECTRIC OUTLAW Manuel utilisateur

DEMON ELECTRIC

DEMON ELECTRIC ARGO Manuel utilisateur

Manuels Vélo populaires d'autres marques

RAMBO

RAMBO R1000X2M-FF-BFD Manuel utilisateur

Vermeiren

Vermeiren SAFARI Manuel utilisateur

Velec

Velec A2/36V Manuel utilisateur

Coswheel

Coswheel A-ONE Manuel utilisateur

Betzold

Betzold 97869 Manuel utilisateur

Cervélo

Cervélo S3 2019 Manuel utilisateur

Tenways

Tenways AGO X Manuel utilisateur

Festo

Festo EGSC-BS-KF Manuel de la liste des pièces

Gio Electric

Gio Electric H1 Volt Manuel utilisateur

GOGOBEST

GOGOBEST GM30 Manuel utilisateur

DAHON

DAHON CIAO - 2009 Manuel utilisateur

Aprimatic

Aprimatic ONDA 500 Guide de démarrage rapide

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuel d'instructions

Greyp

Greyp G6 Series Manuel utilisateur

Babboe

Babboe Carve-E Manuel utilisateur

Huka

Huka orthros Manuel utilisateur

Xtracycle

Xtracycle Stoker 2021 Manuel utilisateur

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuel utilisateur