DeLOCK 90550 Manuel utilisateur
Product-No: 90550
User manual no: 90550-a
www.delock.com
User manual
Bedienungsanleitung
2.4 GHz Barcode Scanner 1D and 2D
with charging station - multilingual
-2-
English
Description
This barcode scanner by Delock can be wirelessly connected to a PC or laptop.
All common 1D and 2D barcode types can be precisely captured even at long
distances. Additionally, the scanner recognizes barcodes displayed on displays
and monitors.
Automatic adaptation to ambient brightness
The scanner automatically adapts to the ambient brightness and captures up to
200 scans per second under optimal lighting conditions.
In low ambient brightness, the barcode is illuminated by an additional white LED
and can therefore also be used in poor lighting conditions.
Charging station acts as interface
The data transfer of the scanned barcodes is done via the 2.4 GHz frequency
band. In addition to charging the hand scanner, the scanner‘s charging station
also functions as a 2.4 GHz interface and is connected to the system via USB
cable.
Using an optional adapter cable, it is possible to connect the charging station to a
smartphone or tablet.
Specication
• Connector: 1 x USB 2.0 Type-B female
• Rechargeable battery: Li-Polymer battery 2000 mAh
• Decoding chip: ARM Cortex 32 Bit
• Resolution: max. 640 x 480
• Trigger: scan button
• Reading distance: ca. 40 mm to 250 mm
• Reading accuracy: 5 - 10 mil
• Range:
indoor area: up to 60 m
outdoor area: up to 100 m
• Internal memory: 16 MB
• Light colour: visible LED red
• Compensation light: LED white
• Sensor: linear CMOS image sensor
• Scan rate: up to 200 scans per second
• Scan angle: 60°
• Surrounding brightness: max. 100000 Lux
• Input voltage: 3.3 V
-3-
English
• Current consumption:
operation: max. 120 mA
standby: max. 500 mA
• Operating temperature: -20 °C ~ 60 °C
• Storage temperature: -40 °C ~ 70 °C
• Relative humidity: 5 - 95 % (non condensing)
• Colour: black
• Weight:
barcode scanner: ca. 146 g
charging cradle: ca. 118 g
• Dimensions (LxWxH):
barcode scanner: ca. 16.5 x 8.2 x 6.5 cm
charging cradle: ca. 12.0 x 9.5 x 8.0 cm
• Cable length without connectors: ca. 1 m
• 2.4 GHz
• Scancodes:
Codabar, Code 128, Code 39, EAN-8 / EAN-13, ISBN - 13, Data Matrix,
PDF417, QR Code
• Supported languages:
German, English, French, Italian, Swiss German, Swiss French, Portugese,
Finnish, Czech, Hungarian, Danish, Polish
System requirements
• Android 9.0 or above
• Chrome OS
• iPad Pro (2018)
• Linux Kernel 5.4 or above
• Mac OS 10.15.6 or above
• Windows 8.1/8.1-64/10/10-64/11
• PC or laptop with a free USB Type-A port for charging station
Package content
• Barcode scanner
• USB 2.4 GHz charging station
• USB charging cable, user manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Do not look directly into the LED diode of the scanner
-4-
English
Charge battery
You can charge the scanner‘s battery by using the charging station. For this
purpose, the station must be connected to the system via USB cable. Then place
the scanner in the holder provided for this purpose.
Beep tones
5 melodical beeps Scanner is active
One short beep The scanner successfully reads the scanned barcode
Three short beeps The scanner reads a barcode although it is not connec-
ted
or the scanner has successfully established the connec-
tion after the reset
One long beep Out of range, bad connection
or device switches o
Connecting the scanner to the system
To connect the scanner to the system, please connect the cable to the computer
(USB-A socket), push scanner button and the code below. After successful con-
nection you will hear two beeps.
Match
If your scanner does not output any values after scanning, please check the
connection to the computer, - as well as the battery level.
If the battery is very low, the scanner cannot read any scans. -
And then connect the scanner to the computer. After a successful connection you
will hear two beeps.
Reset scanner to factory settings
To reset the scanner to its factory settings, please scan the codes below in
sequence. After the second code the scanner switches o, please wake up by
button push and go forward. After a successful connection, the scanner should
emit two beeps.
Important: After the scans, give the scanner a little time (1-2 seconds) to
process the codes internally.
-5-
English
1. Reset
2. Wireless restore
should turn o -wake up by pushing scanner button
3. Match
Scan Mode
The scanner has three dierent scanning modes.
Continuous scanning, where the scanner stays on, auto scanning, where the
scanner detects when a barcode is in the reading range, and normal mode,
scanning at the touch of a button.
For normal mode please scan the following code
For the continuous mode scan this code
And for the autoscan mode, see below
-6-
English
Shutdown
Change language settings
You can choose between below languages. First please scan „Western Europe“
than your language
Western Europe
German
English
French
Italian
Spanish
-7-
English
Swiss (German)
Swiss (French)
Portuguese
Finnish
Czech
Hungarian
Danish
Polish
-8-
English
Data transfer from the memory mode
If you are outside the transmission range to the base station and the connected
system, you can save the scanned codes to the internal memory using the code
below:
Using the code below you can then enter the internal memory mode.
The total amount of the memory is recorded by the following barcode.
You can now upload the stored data by scanning the barcode below.
Please make sure that you are in the reception area of your USB device and that
an ideal connection has been established.
To delete the internal memory afterwards, you can use the following code.
You can return to normal mode with the following code.
-9-
English
Transmission speed
Select the transmission speed according to the PC reception speed.
fast
slow
Terminator setting
Clear terminator Add tab terminator
Add return terminator Add carriage return and line feed
(double carriage return)
-10-
English
Case conversation
All case
Case is not converted
Case reversal
Full capital case
ID setting
„ID display“/“ID hide“ is to set directly. To edit ID, scan „Edit ID“ and then scan
„digital barcodes“ (from 0~9). After editing successfully, the buzzer will sound 2
times.
Notice: There is a space between ID and barcode data.
ID Display
*ID HIDE
EDIT ID
Table des matières
Langues :
Autres manuels DeLOCK Lecteur de codes-barres
DeLOCK
DeLOCK 90564 Manuel utilisateur
DeLOCK
DeLOCK 90508 Manuel utilisateur
DeLOCK
DeLOCK 90518 Manuel utilisateur
DeLOCK
DeLOCK 90586 Manuel utilisateur
DeLOCK
DeLOCK 90600 Comment utiliser
DeLOCK
DeLOCK 90562 Manuel utilisateur
DeLOCK
DeLOCK 90280 Manuel utilisateur
DeLOCK
DeLOCK 90557 Manuel utilisateur
DeLOCK
DeLOCK 90507 Manuel utilisateur
DeLOCK
DeLOCK 90518 Manuel utilisateur
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
