Dell PowerEdge T110 Manuel utilisateur
Dell™ PowerEdge™
T110 Systems
Getting Started
With Your System
系统使用入门
開始使用系統
Mengaktifkan Sistem Anda
はじめに
시스템시작하기
Dell™ PowerEdge™
T110 Systems
Getting Started
With Your System
Regulatory Model E11S
Regulatory Type E11S001
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of
your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if
instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
____________________
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.;
Intel and Xeon are registered trademarks of Intel Corporation in the U.S. and other countries;
Microsoft,Hyper-V, Windows, and Windows Server are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries; Red Hat and Enterprise Linux are
registered trademarks of Red Hat, Inc. in the United States and other countries; SUSE is a registered
trademark of Novell, Inc., in the United States and other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
Regulatory Model E11S
Regulatory Type E11S001
June 2009 P/N T988M Rev. A00
Getting Started With Your System 3
Installation and Configuration
WARNING: Before performing the following procedure, review the safety
instructions that came with the system.
Unpacking the System
Unpack your system and identify each item.
Optional – Connecting the Keyboard, Mouse, and Monitor
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable
to plug into each connector. Be sure to tighten the screws (if any) on the
monitor's cable connector.
4Getting Started With Your System
Connecting the Power Cable
CAUTION: Be sure to set the voltage selection switch on the power supply for the
voltage that most closely matches the AC power available at your location.
Connect the system’s power cable to the system and, if a monitor is used,
connect the monitor’s power cable to the monitor.
Securing the Power Cable
Bend the system power cable into a loop as shown in the illustration and
attach to the cable clasp.
Getting Started With Your System 5
Plug the other end of the power cable into a grounded electrical outlet or
a separate power source such as an uninterrupted power supply (UPS) or
a power distribution unit (PDU).
NOTE: Ensure that the system is connected to a stand-alone power source with
stable power supply for better performance.
Turning On the System
Press the power button on the system. The power indicator should light.
Complete the Operating System Setup
If you purchased a preinstalled operating system, see the operating system
documentation that ships with your system. To install an operating system for
the first time, see the installation and configuration documentation for your
operating system. Be sure the operating system is installed before installing
hardware or software not purchased with the system.
6Getting Started With Your System
Supported Operating Systems
• Microsoft
®
Windows Server
®
2008 R2 Standard and
Foundation (x64) Editions
• Microsoft Windows Server 2008 Standard (x86) Edition with SP2
• Microsoft Windows Server 2008 Standard (x64) Edition with SP2
• Microsoft Windows Server 2008 Standard (x86) Edition
• Microsoft Windows Server 2008 Standard and Foundation (x64) Editions
• Microsoft Windows
®
Small Business Server 2008 Standard and
Premium (x64) Editions
• Microsoft Windows Essential Business Server 2008 Standard and
Premium (x64) Editions
• Microsoft Windows Server 2003 R2 Standard (x86) Edition
• Microsoft Windows Server 2003 R2 Standard (x64) Edition
• Microsoft Windows Server 2008 Hyper-V™
• Microsoft Hyper-V Server 2008
•RedHat
®
Enterprise Linux
®
Server 5.3 (x86_64)
• Red Hat Enterprise Linux Server 5.3 (x86)
•SUSE
®
Linux Enterprise Server 11 (x86_64)
NOTE: For the latest information on supported operating systems,
see www.dell.com.
Getting Started With Your System 7
Other Information You May Need
WARNING: See the safety and regulatory information that shipped with
your system. Warranty information may be included within this document or as
a separate document.
• The
Hardware Owner’s Manual
provides information about system
features and describes how to troubleshoot the system and install or
replace system components. This document is available online at
support.dell.com/manuals
.
• Any media that ships with your system that provides documentation and tools
for configuring and managing your system, including those pertaining to the
operating system, system management software, system updates, and system
components that you purchased with your system.
NOTE: Always check for updates on support.dell.com/manuals and read the
updates first because they often supersede information in other documents.
Obtaining Technical Assistance
If you do not understand a procedure in this guide or if the system does not
perform as expected, see your Hardware Owner’s Manual. Dell™ offers
comprehensive hardware training and certification. See www.dell.com/training
for more information. This service may not be offered in all locations.
Información de la NOM (sólo para México)
La información que se proporciona a continuación aparece en el dispositivo
descrito en este documento, en cumplimiento de los requisitos de la Norma
Oficial Mexicana (NOM):
Importador:
Número de modelo: E11S
Voltaje de
alimentación:
115/230 V CA
Frecuencia: 50/60 Hz
Consumo eléctrico: 9/4,5 A
8Getting Started With Your System
Technical Specifications
Processor
Processor type Intel®Xeon®Processor 3400 series
Expansion Bus
Bus type PCI Express Generation 2
Expansion slots: Slot 1: PCIe x8 (x8 routing), half-length
Slot 2: PCIe x16 (x8 routing), full-length
Slot 3: PCIe x8 (x4 routing), half-length
Slot 4: PCIe x1 (x1 routing), half-length
Memory
Architecture 1066-MHz or 1333-MHz DDR3 unbuffered
Error Correcting Code (ECC) DIMMs
Memory module sockets Four 240-pin
Memory module capacities 1 GB, 2 GB, or 4 GB
Minimum RAM 1 GB
Maximum RAM 16 GB
Drives
Hard drives Up to four 3.5-inch, cabled SAS or SATA
internal drives
Optical drive Optional internal SATA DVD-ROM or SATA
DVD+/-RW
Optional external USB DVD-ROM
NOTE: DVD devices are data only.
Tape drive One optional internal half-height tape
backup device
Autres manuels pour PowerEdge T110
5
Table des matières
Langues :
Autres manuels Dell Serveur
Dell
Dell POWEREDGE 4300 Manuel utilisateur
Dell
Dell PowerEdge 1955 Manuel utilisateur
Dell
Dell PowerEdge T710 Manuel technique
Dell
Dell PowerEdge 6850 Guide de l'utilisateur
Dell
Dell PowerEdge 6450 Manuel technique
Dell
Dell PowerEdge UPS 500T Manuel utilisateur
Dell
Dell EMC VxRack FLEX Mode d’emploi
Dell
Dell PowerEdge T420 Manuel utilisateur
Dell
Dell PowerEdge R320 Manuel utilisateur
Dell
Dell PowerEdge T110 II Manuel utilisateur
Dell
Dell PowerEdge R420xr Manuel utilisateur
Dell
Dell Force10 MXL Blade Manuel utilisateur
Dell
Dell EMC PowerEdge R350 Manuel
Dell
Dell KY0730481 Manuel d'installation
Dell
Dell PowerEdge R330 Manuel utilisateur
Dell
Dell PowerEdge 1655MC Manuel utilisateur
Dell
Dell PowerEdge R410 Manuel utilisateur
Dell
Dell VEP4600 Manuel utilisateur
Dell
Dell PowerEdge T320 Manuel utilisateur
Dell
Dell DX6004S Manuel utilisateur
