Dell PowerEdge R640XL Manuel utilisateur
Security Analytics Gen14 Dell Hardware
Configuration Guide
18 Dec 2020
Broadcom, the pulse logo, Connecting everything, and Symantec are among the trademarks of Broadcom.
Copyright © 2020 Broadcom. All Rights Reserved.
The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. For more information, please visit www.broadcom.com.
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability,
function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does
not assume any liability arising out of the application or use of this information, nor the application or use of any product or
circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
Security Analytics Gen14 Dell Hardware
Configuration Guide
18 Dec 2020
2
Gen14 Dell Hardware
3
Security Analytics
Configuration Guide
Table of Contents
Chapter 1: Introduction ...................................................................................................................... 4
About This Guide .............................................................................................................................................................4
Requirements ...................................................................................................................................................................4
Prerequisites (Before Using This Configuration Guide) ..............................................................................................5
Where to Go for Help .......................................................................................................................................................5
Server I/O Configuration..................................................................................................................................................6
Storage Array I/O Configuration .....................................................................................................................................6
Security Analytics Systems ............................................................................................................................................8
Chapter 2: Connect the Storage Arrays ........................................................................................... 9
Cabling for Small Sensor Systems.................................................................................................................................9
Cabling for Large Sensor Systems ..............................................................................................................................12
Chapter 3: First-time Power On and Initialization .......................................................................... 18
Powering On Sensor Systems ......................................................................................................................................18
Configure the Server’s iDRAC Port ..............................................................................................................................18
Initialize and License the Server...................................................................................................................................19
Configure Network Settings for the Storage Array .....................................................................................................20
Chapter 4: Disk Array Configuration .............................................................................................. 21
Clear Disk Arrays on the Storage Array.......................................................................................................................21
Configure Capture and Indexing Filesystems .............................................................................................................24
Gen14 Dell Hardware
4
Security Analytics
Configuration Guide
Chapter 1: Introduction
About This Guide
This guide documents how to install Security Analytics on Gen14 Dell hardware—to a SA-SRVG8-20 or SA-SRVG8-40
server as a standalone Central Manager (CM), or as a Sensor connected to SA-STAG8-2U144 or SA-STAG8-5U840 storage
arrays and SA-STXG8-2X144 expansion enclosures.
For other hardware configurations, consult the appropriate configuration guide, available from techdocs.broadcom.com:
Security Analytics Configuration Guide for SA-S500 Series
Security Analytics Configuration Guide for Gen13 Dell Hardware
Security Analytics Configuration Guide for Gen12 Dell Hardware
WARNING! You cannot combine Gen14 Dell hardware with Gen12 or Gen13 Dell hardware, or with SA-S500 Series servers.
The Gen14 Dell hardware documented in this guide should only be used as indicated with the specified Symantec models.
Requirements
The Security Analytics systems documented in this guide require the following:
Server
– Symantec SA-SRVG8-20 (Dell PowerEdge R640XL)
– Symantec SA-SRVG8-40 (Dell PowerEdge R640XL)
Optional storage:
– SA-STAG8-2U144 storage array (Dell PowerVault ME4012)
– SA-STAG8-5U840 storage array (Dell PowerVault ME4084)
– SA-STXG8-2X144 expansion enclosure (Dell PowerVault ME412)
Security Analytics 8.1.3 or later with license key
VGA or serial monitor and cable
USB keyboard
Category 6A network cables for 10GBase-T operation
Management workstation with Ethernet connectivity
Gen14 Dell Hardware
5
Security Analytics
Configuration Guide
Prerequisites (Before Using This Configuration Guide)
Before attempting to configure a Security Analytics system with Gen14 Dell hardware, make sure to first complete the
following quick start guides for your server and storage array.
1. Complete the following steps to install the SA-SRVG8-20 or SA-SRVG8-20 server, per the instructions in the
SA Gen14 Dell Server Quick Start Guide, available at: techdocs.broadcom.com
Unpack the server.
Rackmount the server.
Install the Cable Management Arm (CMA).
Connect cables.
Perform the initial configuration.
License the server.
2. Complete the following steps to install the SA-STAG8-2U144 or SA-STAG8-5U840 storage array, per the instructions in
the SA Gen14 Dell Storage Quick Start Guide, available at: techdocs.broadcom.com
Unpack the storage array.modu
Rackmount the storage array.
Install drives in the SA-STAG8-5U840storage array.
Connect cables.
Power on the system.
Configure network settings for the storage array.
Where to Go for Help
Symantec Technical Support
For Symantec Technical Support, case management, licenses, and product downloads, go to:
support.broadcom.com/security
Security Analytics Help and Documentation
For Security Analytics help, in the web UI, select Settings > Help > [language].
For Security Analytics software documentation, go to techdocs.broadcom.com and type “Security” in the search field,
then click Security Analytics.
Appliance Documentation
For Symantec server and storage array documentation, go to techdocs.broadcom.com and type “Appliances” in the
search field, then click Hardware Appliances.
For Dell PowerEdge server documentation, go to dell.com/poweredgemanuals and navigate to your server model
(PowerEdge R640).
For Dell PowerVault storage documentation, go to dell.com/storagemanuals and navigate to your storage array model
(PowerVault ME4012, ME4084, or ME412).
Gen14 Dell Hardware
6
Security Analytics
Configuration Guide
Server I/O Configuration
The following servers can be used as a standalone Central Manager (CM) or as a Sensor connected to storage arrays. They
include the following iDRAC, MGMT, Ethernet (LAN), and RAID controller (SAS) ports.
Storage Array I/O Configuration
The following storage arrays can be used in Sensor Systems. They include the following MGMT and SAS ports.
SA-SRVG8-20 Server Rear Panel
SA-SRVG8-40 Server Rear Panel
SA-STAG8-2U144 Storage Array Rear Panel
Gen14 Dell Hardware
7
Security Analytics
Configuration Guide
SA-STAG8-5U840 Storage Array Rear Panel
SA-STXG8-2X144 Expansion Enclosure Rear Panel
Gen14 Dell Hardware
8
Security Analytics
Configuration Guide
Security Analytics Systems
The following Security Analytics systems (8.1.3 or later) are supported with the specified Gen14 Dell hardware.
NOTE: Central Manager (CM) servers do not require external storage.
CM or Sensor / Space Storage Array / Space Expansion Enclosure / Space Network
Central
Manager
1(1) SA-SRVG8-20 12TB – – – – 10/1GbE
2(1) SA-SRVG8-40 12TB – – – – 10/1GbE,
25/10/1GbE
Small
Sensor
1(1) SA-SRVG8-20 12TB (1) SA-STAG8-2U144 144TB – – 10/1GbE
2(1) SA-SRVG8-20 12TB (1) SA-STAG8-2U144 144TB (1–3) SA-STXG8-2X144 144TB–
432TB
10/1GbE
3(1) SA-SRVG8-20 12TB (1) SA-STAG8-5U840 840TB – – 10/1GbE
Large
Sensor
1(1) SA-SRVG8-40 12TB (1) SA-STAG8-2U144 144TB – – 10/1GbE,
25/10/1GbE
2(1) SA-SRVG8-40 12TB (1) SA-STAG8-2U144 144TB (1–3) SA-STXG8-2X144 144TB-
432TB
10/1GbE,
25/10/1GbE
3(1) SA-SRVG8-40 12TB (1) SA-STAG8-5U840 840TB – – 10/1GbE,
25/10/1GbE
4(1) SA-SRVG8-40 12TB (2) SA-STAG8-2U144 288TB – – 10/1GbE,
25/10/1GbE
5(1) SA-SRVG8-40 12TB (2) SA-STAG8-2U144 288TB (1–3) SA-STXG8-2X144 144TB-
432TB
10/1GbE,
25/10/1GbE
6(1) SA-SRVG8-40 12TB (2) SA-STAG8-5U840 1680TB – – 10/1GbE,
25/10/1GbE
Security Analytics Systems for Dell Gen14 Hardware
Gen14 Dell Hardware
9
Security Analytics
Configuration Guide
Chapter 2: Connect the Storage Arrays
If you are configuring a Sensor System, all servers, storage arrays, and expansion enclosures must be connected before
powering on the system and configuring disk arrays. Before connecting cables, make sure that all severs, storage arrays,
and expansion enclosures have been rackmounted and powered off. For SAS connections, use the 12Gb HD-Mini to HD-
Mini SAS cables included with the storage array, or equivalent.
Cabling for Small Sensor Systems
Security Analytics Small Sensor Systems include the following.
Small Sensor System #1—(1) SA-SRVG8-20, (1) SA-STAG8-2U144.
Small Sensor System #2—(1) SA-SRVG8-20, (1) SA-STAG8-2U144, (1–3) SA-STXG8-2X144.
Small Sensor System #3—(1) SA-SRVG8-20, (1) SA-STAG8-5U840.
Small Sensor System #1
SAS cabling for the Small Sensor System #1 is as follows:
(1) SA-SRVG8-20 + (1) SA-STAG8-2U144
Server SA-SRVG8-20 Sensor SA-STAG8-2U144 Storage Array
RAID Controller Port Controller Module Port
Slot 1 SAS 0 A (Top) SAS 0
Slot 1 SAS 1 B (Btm) SAS 0
Cabling Guide for Small Sensor System #1
Gen14 Dell Hardware
10
Security Analytics
Configuration Guide
Small Sensor System #2
SAS cabling for the Small Sensor System #2 is as follows:
(1) SA-SRVG8-20 + (1) SA-STAG8-2U144 + (1–3) SA-STXG8-2X144
SA-SRVG8-20 Sensor
SA-STAG8-2U144
Storage Array
SA-STXG8-2X144
Expansion Enclosure (Up to 3)
RAID Cont Port Cont Mod Port Cont Mod Port Cont Mod Port Cont Mod Port
Slot 1 SAS 0 A (Top) SAS 0
Slot 1 SAS 1 B (Btm) SAS 0
A (Top) SAS Exp A (Top) SAS A
B (Btm) SAS Exp B (Btm) SAS C
A (Top) SAS C A (Top) SAS A
B (Btm) SAS C B (Btm) SAS A
A (Top) SAS C A (Top) SAS A
B (Btm) SAS C B (Btm) SAS A
Cabling Guide for Small Sensor System #2
Table des matières
Autres manuels Dell Serveur
Dell
Dell EMC VxFlex Ready Node 13G Manuel utilisateur
Dell
Dell PowerEdge T620 Manuel
Dell
Dell DX6000G Manuel utilisateur
Dell
Dell PowerEdge 2410 Manuel utilisateur
Dell
Dell PowerEdge SP 575-2 Manuel utilisateur
Dell
Dell PowerEdge 2550 Manuel utilisateur
Dell
Dell OptiPlex FX130 Manuel utilisateur
Dell
Dell EMC PowerEdge R650 Manuel
Dell
Dell PowerEdge M420 Manuel utilisateur
Dell
Dell Wyse 5060 Manuel utilisateur
Dell
Dell PowerEdge 6850 Guide de l'utilisateur
Dell
Dell PowerEdge 1500SC Manuel utilisateur
Dell
Dell PowerEdge C6105 Manuel utilisateur
Dell
Dell POWEREDGE CLUSTER SE100 Instructions de montage
Dell
Dell PowerEdge C2100 Manuel utilisateur
Dell
Dell EMC PowerEdge R440 Manuel
Dell
Dell EMC PowerEdge R440 Manuel
Dell
Dell External OEMR R310 Guide de démarrage rapide
Dell
Dell PowerEdge UPS 500T Manuel utilisateur
Dell
Dell PowerEdge T110 II Guide de démarrage rapide
