Dell PowerEdge R415 Manuel utilisateur
Dell PowerEdge R415 Systems
Getting Started
With Your System
Guide de mise en route du système
Primeiros passos com o sistema
Procedimientos iniciales con el sistema
Dell PowerEdge R415 Systems
Getting Started
With Your System
Regulatory Model E07S Series
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use
of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data
if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
____________________
Information in this publication is subject to change without notice.
© 2010 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc.
AMD®is a registered trademark and AMD Opteron™ is a trademark of Advanced Micro Devices, Inc.
Microsoft®, Windows®, Windows Server®, and Hyper-V™ are either trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat Enterprise
Linux®and Enterprise Linux®are registered trademarks of Red Hat, Inc. in the United States
and/or other countries. Novell®is a registered trademark and SUSE™ is a trademark of Novell Inc.
in the United States and other countries. Citrix®and XenServer®are either registered trademarks or
trademarks of Citrix Systems, Inc. in the United States and/or other countries. VMware®is a registered
trademark of VMWare, Inc. in the United States or other countries.
Other trademarks and trade names may be used in this publication to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
Regulatory Model E07S Series
June 2010 P/N VY052 Rev. A00
Getting Started With Your System 3
Installation and Configuration
WARNING: Before performing the following procedure, review the safety
instructions that came with the system.
Unpacking the System
Unpack your system and identify each item.
Installing the Rails and System in a Rack
Assemble the rails and install the system in the rack following the safety
instructions and the rack installation instructions provided with your system.
4Getting Started With Your System
Optional – Connecting the Keyboard, Mouse, and Monitor
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable
to plug into each connector. Be sure to tighten the screws (if any) on the
monitor's cable connector.
Connecting the Power Cable(s)
Connect the system’s power cable(s) to the system and, if a monitor is used,
connect the monitor’s power cable to the monitor.
Getting Started With Your System 5
Installing the Power Cord Retention Bracket
Attach the power cord retention bracket on the right bend of the power
supply handle. Bend the system power cable into a loop as shown in the
illustration and attach to the bracket’s cable clasp.
Plug the other end of the power cable(s) into a grounded electrical outlet
or a separate power source such as an uninterrupted power supply (UPS)
or a power distribution unit (PDU).
Turning On the System
Press the power button on the system and the monitor. The power indicators
should light.
6Getting Started With Your System
Installing the Optional Bezel
Install the bezel (optional).
Complete the Operating System Setup
If you purchased a preinstalled operating system, see the operating system
documentation that ships with your system. To install an operating system
for the first time, see the installation and configuration documentation
for your operating system. Be sure the operating system is installed before
installing hardware or software not purchased with the system.
Supported Operating Systems
• Microsoft Windows Server 2008 SP2 Web, Standard, and Enterprise (x86)
Editions
• Microsoft Windows Server 2008 SP2 Web, Standard, Enterprise,
and Datacenter (x64) Editions
• Microsoft Windows Server 2008 R2 Web, Standard, Enterprise,
and Datacenter (x64) Editions
• Microsoft Windows Server 2008 R2 HPC (x64) Edition
Getting Started With Your System 7
• Red Hat Enterprise Linux 5.5 Standard (x86_64), Advanced Platform
(x86_64), and HPC Editions
• SUSE Linux Enterprise Server 11 SP1 (x86_64)
• SUSE Linux Enterprise Server 10 SP3 (x86_64)
• VMware ESX 4.0 Update 2 Classic Edition
• VMware ESXi 4.0 Update 2 Installable Edition
• VMware ESX 4.1 Classic Edition
• VMware ESXi 4.1 Installable Edition
• Citrix XenServer 5.6 Enterprise Edition
• Microsoft Hyper-V Windows Server 2008 R2 (stand-alone)
• Microsoft Windows Server 2008 R2 Hyper-V role
NOTE: For the latest information on supported operating systems,
see dell.com/ossupport.
Other Information You May Need
WARNING: See the safety and regulatory information that shipped with your
system. Warranty information may be included within this document or as a
separate document.
• The rack documentation included with your rack solution describes how
to install your system into a rack.
•The
Hardware Owner’s Manual
provides information about system features
and describes how to troubleshoot the system and install or replace system
components. This document is available online at
support.dell.com/manuals
.
• Dell systems management application documentation provides
information about installing and using the systems management software.
NOTE: Always check for updates on support.dell.com/manuals and read the
updates first because they often supersede information in other documents.
8Getting Started With Your System
Obtaining Technical Assistance
If you do not understand a procedure in this guide or if the system does
not perform as expected, see your Hardware Owner’s Manual. Dell offers
comprehensive hardware training and certification. See dell.com/training
for more information. This service may not be offered in all locations.
Technical Specifications
Processor
Processor type Up to two AMD Opteron 4000 series
Expansion Bus
Bus type PCI Express Generation 2
Expansion slots Riser 1
Slot 1: x16 link with x16 physical connector,
half-length, full height.
Memory
Architecture 800/1066/1333 MHz DDR3 SDRAM
registered, unregistered, and low voltage
Error Correcting Code (ECC) DIMMs.
Memory module sockets Eight 240-pin
Memory module capacities 1 GB, 2 GB, 4 GB, or 8 GB
Minimum RAM 1 GB (one processor) or
2 GB (two processors)
Maximum RAM 32 GB (one processor) or
64 GB (two processors)
Autres manuels pour PowerEdge R415
4
Table des matières
Langues :
Autres manuels Dell Serveur
Dell
Dell PowerEdge R810 Manuel utilisateur
Dell
Dell PowerVault NX3100 Manuel utilisateur
Dell
Dell PowerEdge C6220 II Manuel utilisateur
Dell
Dell PowerEdge T420 Manuel utilisateur
Dell
Dell PowerEdge 1400SC Manuel utilisateur
Dell
Dell PowerEdge C6105 Guide de démarrage rapide
Dell
Dell PowerEdge R715 Manuel utilisateur
Dell
Dell PowerEdge R530 Manuel utilisateur
Dell
Dell 6100 Instructions d'installation
Dell
Dell PowerEdge 6850 Manuel utilisateur
Dell
Dell 5J5D0 Manuel
Dell
Dell PowerEdge 1400SC Manuel technique
Dell
Dell PowerEdge 400SC Manuel
Dell
Dell Wyse 5030 Manuel utilisateur
Dell
Dell PowerEdge 1650 Manuel utilisateur
Dell
Dell PowerEdge M910 Guide de démarrage rapide
Dell
Dell PowerEdge R230 Manuel utilisateur
Dell
Dell PowerEdge R860 Manuel
Dell
Dell PowerEdge M620 Manuel utilisateur
Dell
Dell Wyse 5030 Manuel utilisateur
