Dell EMC VxRail G Series Manuel utilisateur
Dell EMC VxRail™G Series Appliances
Version 4.5
Owner's Manual
REV 02
Copyright ©2016-2017 Dell EMC All rights reserved.
Published September 2017
Dell believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS-IS.“ DELL MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND
WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED
IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE.
Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners.
Published in the USA.
Dell EMC
Hopkinton, Massachusetts 01748-9103
1-508-435-1000 In North America 1-866-464-7381
www.DellEMC.com
2Dell EMC VxRail G Series Appliances 4.5 Owner's Manual
Introduction 5
Introduction..................................................................................................6
Support........................................................................................................ 6
Registering for online support......................................................... 6
Where to go for support resources.................................................. 7
Using the SolVe Desktop application for VxRail Series procedures....
7
About the VxRail G Series 9
Handling the appliance................................................................................ 10
Appliance components and controls............................................................10
Technical Specifications 13
Appliance power and cooling information.................................................... 14
Appliance dimensions and weight................................................................ 14
Operating and storage environment............................................................ 15
Installation 17
Pre-installation Site Checklist..................................................................... 18
10GbE or 1GbE switch networking...............................................................18
Network requirements................................................................................ 18
Replacing and adding hardware 21
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
CONTENTS
Dell EMC VxRail G Series Appliances 4.5 Owner's Manual 3
CONTENTS
4Dell EMC VxRail G Series Appliances 4.5 Owner's Manual
Introduction
This document describes the VxRail G Series appliances, including their physical
features and technical specifications.
The target audience for this document includes customers, field personnel, and
partners who want to operate a VxRail™Appliance, including the following models:
lVxRail G410 Appliance
lVxRail G410F Appliance
This document is designed for people familiar with:
lDell EMC systems and software
lVMware virtualization products
lData center appliances and infrastructure
The VCE Glossary provides terms, definitions, and acronyms that are related to VCE
Systems.
To suggest documentation changes and provide feedback on this book, send an email
applies.
Support
Create an Online Support account to get access to support and product resources for
your VxRail Appliance.
If you already have an account, register your VxRail Appliance to access the available
resources.
For convenience, you can link your Online Support account with VxRail Manager and
access support resources without having to log in separately.
Note
If you plan to set up ESRS, your Online Support account must be linked to VxRail
Manager under the same party ID or the deployment will fail. Your appliance must also
be in an installed state in the Install Base.
Registering for online support
Create an Online Support account to access support resources.
After you register, you can:
lRegister your system
lObtain product license files and software updates
lDownload VxRail Series product documentation
lDownload the SolVe Desktop application for hardware replacement and upgrade
procedures
lBrowse the VxRail Series community and support information
lLink your support account for access to resources from within VxRail Manager
Introduction
6Dell EMC VxRail G Series Appliances 4.5 Owner's Manual
Procedure
1. Point your Web browser to emc.com/vxrailsupport (or support.emc.com).
2. Click Register here.
3. Fill in the required information.
Support will send you a confirmation email, typically within 48 hours.
Where to go for support resources
Access support resources for your VxRail Appliance by doing any of the following:
lClick the VxRail Manager Support tab.
lPoint your Web browser to emc.com/vxrailsupport (or support.emc.com).
Using the SolVe Desktop application for VxRail Series procedures
Step-by-step instructions for procedures such as replacing hardware or performing
system administrative tasks are available through the SolVe Desktop application.
CAUTION
To avoid potential data loss, refer to the VxRail Series procedures in the SolVe
Desktop application before performing any hardware replacement or upgrade
activity.
To download the SolVe Desktop application, go to https://support.emc.com and click
SolVe on the main page. Download and install the SolVe Desktop application on your
computer.
You must have an online support account to use the SolVe Desktop application.
Introduction
Where to go for support resources 7
Introduction
8Dell EMC VxRail G Series Appliances 4.5 Owner's Manual
Handling the appliance
Table 1 Heavy lift warning
046-005-109_A01
CL5561
The appliance is heavy and should be handled by two
people. To avoid personal injury and/or damage to the
appliance, do not attempt to lift the appliance without a
mechanical lift and help from another person.
Appliance components and controls
The appliance has four server nodes that are accessible at the rear of the appliance.
Server node 1 defines the default node type for the system.
Figure 1 Location of server nodes
1. Node 1
2. Node 2
3. Node 3
4. Node 4
Each of the four server nodes has a front control panel and designated disk drive
group.
About the VxRail G Series
10 Dell EMC VxRail G Series Appliances 4.5 Owner's Manual
Table des matières
Autres manuels Dell EMC Serveur
Dell EMC
Dell EMC PowerEdge T440 Manuel utilisateur
Dell EMC
Dell EMC VxRail 60 Series Manuel utilisateur
Dell EMC
Dell EMC PowerEdge T440 Guide de démarrage rapide
Dell EMC
Dell EMC PowerEdge R740 Guide de démarrage rapide
Dell EMC
Dell EMC PowerEdge R740xd Manuel
Dell EMC
Dell EMC VxRail P470 Manuel utilisateur
Dell EMC
Dell EMC PowerEdge R440 Manuel
Dell EMC
Dell EMC PowerEdge XE2420 Manuel
Dell EMC
Dell EMC PowerEdge T640 Manuel
Dell EMC
Dell EMC PowerEdge R540 Manuel
Dell EMC
Dell EMC VxRail P580N Manuel utilisateur
Dell EMC
Dell EMC DSS 9000J Manuel
Dell EMC
Dell EMC DP4400 Manuel
Dell EMC
Dell EMC PowerEdge R620 Manuel utilisateur
Dell EMC
Dell EMC PowerEdge R940xa Manuel utilisateur
Dell EMC
Dell EMC VxRail Appliance Manuel utilisateur
Dell EMC
Dell EMC Generation 6 Manuel utilisateur
Dell EMC
Dell EMC PowerEdge T340 DPJ1G Manuel
Dell EMC
Dell EMC E45S Manuel
Dell EMC
Dell EMC PowerEdge C4140 Manuel utilisateur
