DeFelsko POSITECTOR SMARTLINK Manuel utilisateur

Instruction Manual v. 1.0 - AndroidTM

with PosiTector

SPG

probes

Table of Contents

Introduction .................................................................. 1

Why is Measurement Important? ........................... 2

Quick Start ................................................................... 2

PosiTector App ............................................................. 3

Connect PosiTector App to PosiTector probe ........ 3

User Interface ........................................................ 4

PosiTector SmartLink ................................................... 6

Connect a Probe .................................................... 6

Power-up/Power-down ........................................... 7

Tri-Color LED Button .............................................. 7

PosiTector SPG probes ............................................... 8

Factory Calibration ................................................. 8

Calibration Adjustment ........................................... 8

Certification ............................................................ 9

Calibration, Verification and Adjustment ...................... 9

Menu Operation ........................................................... 11

Memory Menu .............................................................. 12

New Batch .............................................................. 12

Batch Summary View ........................................ 13

Tool Bar .............................................................. 13

Delete/Ignore Reading .................................. 14

Add New Batch .............................................. 14

Add Photo ...................................................... 15

Add Image Annotation ................................... 15

Add Notes ...................................................... 16

Share Batch .................................................. 16

Report ................................................................ 16

Export ................................................................ 16

Batch Readings View ........................................ 17

Batch Chart View ............................................... 17

Open ...................................................................... 18

Close ...................................................................... 18

Delete ..................................................................... 19

Batch Report Configuration ................................... 19

Batch Report .......................................................... 20

Statistics Menu ............................................................. 20

HiLo Alarm ............................................................. 21

HiLo Alarm Limits ................................................... 21

Clear ....................................................................... 21

Setup Menu ................................................................. 22

SmartLink Info ........................................................ 22

Change Units ......................................................... 22

SmartLink Lock ...................................................... 22

Reset (Menu Reset / LED Button Reset) ............... 23

Troubleshooting ........................................................... 24

Warranty ...................................................................... 24

Introduction

PosiTector Surface Profile Gage (SPG) probes measure the

peak-to-valley height of the surface profile of abrasive blast cleaned

surfaces. This instruction manual specifically covers use with

PosiTector SmartLink.

The PosiTector SmartLink and free mobile app allow you to wirelessly

connect a wide selection of PosiTector probes to your smart device.

Take full advantage of your device's keyboard, microphone, camera,

internet data connection, etc. to simplify and enhance your

measurement inspection process.

The PosiTector SmartLink measurement solution consists of a

PosiTector App, PosiTector SmartLink device and compatible

PosiTector probe.

In addition to the PosiTector SPG, compatible probes include the

PosiTector RTR-H (replica tape reader), 6000 (coating thickness) and

DPM (environmental conditions).

Why is Measurement Important?

Steel is often abrasive blast cleaned or otherwise roughened prior

to painting. The peak-to-valley height of the resultant surface

profile is an important factor in the performance of applied

protective coatings.

Low profile may reduce coating bond strength (adhesion). Too high

and the peaks may receive insufficient coverage and possibly rust

prematurely. The costly application of more coating may be

required if the profile is too high.

For these reasons, surface profile should be measured prior to

coating application to ensure that it meets contract specifications.

Quick Start

The PosiTector SmartLink powers-up when the LED button is

pressed. To preserve battery life, the PosiTector SmartLink

powers-down after 5 minutes of no activity. Alternatively, press and

hold the LED button until it turns red and shuts off (approximately

5 seconds). All probe settings and calibration adjustments are

retained within the PosiTector SmartLink, stored measurement

data is retained within the smart device (cell phone, tablet).

Wirelessly connect the PosiTector probe to the smart device using

the PosiTector App.

Measure

Remove the protective rubber cap from probe.1

Place the included glass zero plate onto a stable, flat surface.2

Take a reading on the plate. If the average of several

readings is not within tolerance of the probe, zero the probe

(pg 10).

Place the probe FLAT on the surface to be measured such3

that the tip of the probe reaches into the bottom of a profile

valley. HOLD STEADY until a reading is displayed.

Lift the probe from the surface between readings.

PosiTector App

The PosiTector App connects a PosiTector SmartLink to your Smart

device enabling you to use PosiTector 6000, DPM, SPG, or RTR-H

probes on your device without the need for a conventional gage body.

Screen fonts, brightness and displayed language are inherited from

your smart device settings. Currently, the PosiTector App has language

support for English, Spanish, French, German, Chinese and Korean.

Screen orientation is fixed to portrait only, rotation to landscape is not

supported.

Stored batch readings, images and notes are all stored in the

PosiTector App (on your smart device). The number of stored batch

readings is only limited by the memory available on your smart device.

If the application is removed or a menu Reset (pg 23) is performed, all

stored measurements and associated data is permanently erased.

Power-up the PosiTector SmartLink and connected SPG probe by1

pressing the LED button. The button will blink blue.

Select the PosiTector SmartLink App icon on your smart device.2

Select Continue. A list of available PosiTector probes (listed by3

connected probe type and serial number) will be displayed. Select

the desired PosiTector SmartLink to connect. The LED button on

the PosiTector SmartLink will illuminate solid blue when

successfully connected.

The probe model and serial number is engraved on the backside of the

plastic probe connector (i.e. SPG 234852).

Wirelessly Connecting the PosiTector App

to a PosiTector

to a PosiTector SPG

SPG probe

probe

The user interface was designed to combine the proven simplicity of

PosiTector gages and the advanced functionality of a smart device's

features including touch, swipe, keyboard, camera and more. The

interface will be instantly recognizable to those familiar with PosiTector

instruments.

User Interface

Main Navigation Bar

The Main Navigation section is dynamic and may change from one

screen to another.

In the above example, Search and Menu navigation options are

available.

Search returns back to the list of available PosiTector SmartLink

devices. Menu accesses the Main Menu.

SmartLink Status Bar

Displays information about the connected PosiTector SmartLink and

associated probe.

The example indicates that the PosiTector SmartLink battery status is

full and connected to a PosiTector SPG probe (serial number: 234852).

Measurement Area

Displays measurement related information. The surface profile

example on page 4 shows the last measurement (54 microns).

Memory is ON and measurements are being stored into Batch 6 (B6).

The measurement area will change depending on the connected probe

type and selected modes.

Modes Icons and Units

Displays icons for active modes (such as the disk icon X for Memory

mode, pg 12), current calibration adjustment type ( X Factory), and

measurement units (microns).

Carousel

The carousel is displayed when more than a single view (screen) is

present. The number of dots represent the number of available views.

Swipe your finger horizontally across the screen to switch between

views.

Tip:Some views contain interactive areas. For this reason we

recommend swiping horizontally across the Mode Icons and Units bar.

Tool Bar

Displays available actions applicable to current operating modes

(i.e. Memory (pg 12), Statistics (pg 20), HiLo (pg 21), etc.)

The PosiTector SmartLink acts as a relay between the PosiTector

probe and PosiTector App using wireless Bluetooth Smart

(BLE Bluetooth Low Energy). No pairing required! Auto-pairing

Bluetooth connection works up to 10 m (30 feet) away.

Information specific to currently selected modes and user

calibration adjustments (specific to each probe) are retained within

the PosiTector SmartLink. This allows for seamless switching

between smart devices (phone and tablet).

Measurement data is not stored within the PosiTector

SmartLink. All measurement data (readings, images, notes) is

stored within the PosiTector App on your smart device.

PosiTector

PosiTector SmartLink

SmartLink

NOTE:

Connect a Probe

To connect a probe, slide the plastic probe connector in the direction

of the arrow (shown above) until it locks in place. Reverse for

detaching the probe.

When powered-up, the PosiTector SmartLink automatically determines

what type of probe is attached and does a self-check. The probe type,

model and serial number are displayed when found within the app's

Search screen.

The PosiTector App features probe hot-swap. During the

measurement process, probes can be interchanged without the need

to go back to the search screen. Simply swap probes (PosiTector

SmartLink will power-down) and then power-up the PosiTector

SmartLink. The PosiTector App will automatically recognize the probe

and be ready to measure.

NOTE:

Power-up / Power-down

The PosiTector SmartLink powers-up when the LED button is pressed.

To preserve battery life, the PosiTector SmartLink powers-down after

5 minutes of no activity. Alternatively, press and hold the LED button

until it turns red and shuts off (approximately 5 seconds). All probe

settings and calibration adjustments are retained, stored measurement

data is retained within the smart device.

Tri-Color LED Button

The LED visually provides connection and measurement status.

LED Color Status:

Blue Blink = Not Connected to PosiTector App

Blue Solid = Connected to PosiTector App

Green Blink = Successful Reading

Autres manuels pour POSITECTOR SMARTLINK

Table des matières

Autres manuels DeFelsko Instrument de mesure

DeFelsko

DeFelsko PosiTector SPG Manuel utilisateur

DeFelsko

DeFelsko PosiTector DPM Manuel utilisateur

DeFelsko

DeFelsko PosiTest DFT Manuel utilisateur

DeFelsko

DeFelsko PosiTector SPG Manuel utilisateur

DeFelsko

DeFelsko PosiTector BHI Manuel utilisateur

DeFelsko

DeFelsko PosiTector CMM IS Manuel utilisateur

DeFelsko

DeFelsko POSITECTOR RTR Manuel utilisateur

DeFelsko

DeFelsko PosiTector DPM Manuel utilisateur

DeFelsko

DeFelsko PosiTector SHD Manuel utilisateur

DeFelsko

DeFelsko PosiTector SPG Manuel utilisateur

DeFelsko

DeFelsko PosiTector DPM Manuel utilisateur

DeFelsko

DeFelsko PosiTector 200 Manuel utilisateur

DeFelsko

DeFelsko PosiTector PC Manuel utilisateur

DeFelsko

DeFelsko PosiTector UTG Manuel utilisateur

DeFelsko

DeFelsko PosiTector SPG Manuel utilisateur

DeFelsko

DeFelsko PosiTector SHD Standard Manuel utilisateur

DeFelsko

DeFelsko PosiTector 200 Manuel de service

DeFelsko

DeFelsko PosiTector SST Manuel utilisateur

DeFelsko

DeFelsko PosiTector UTG Manuel utilisateur

DeFelsko

DeFelsko PosiTector SHD Manuel utilisateur

DeFelsko

DeFelsko PosiTector RTR H Manuel utilisateur

DeFelsko

DeFelsko PosiTest HHD Verifier Manuel utilisateur

DeFelsko

DeFelsko PosiTector UTG Manuel utilisateur

DeFelsko

DeFelsko PosiTector DPM Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur