DeCrane Aerospace Audio International LCDP-9151-201 Installation Manual
Document # 540355, IR, 11/2007 Page 7 of 16
3.0 Installation
3.1 Preparation
3.1.1 During the design and layout of the aircraft cabin, careful
consideration of the location of this module is necessary. Some of
the items to be considered include:
•Space
•Available power supply
•Environmental conditions (temperature, humidity, etc.)
•Length of cable runs
3.1.2 The LCDP-9151-201 shall be installed to conform to the standards
designated by the customer, installing agency, and existing
conditions as to the unit location and type of installation.
3.1.3 Mounting is accomplished by insertion of the Plug-In arm into
BSE-9101-201-x Plug-In Monitor Base. Refer to Section 7.0,
Reference Drawings, for mounting hole diameters and
configuration.
3.1.4 Locate the monitor as close to the source equipment as possible in
order to reduce the possibility of noise introduced into the video.
Refer to Section 6.0 for unit dimensions.
3.2 Unpacking and Inspection
3.2.1 Carefully open the packaging and remove the LCDP-9151-201.
Verify that all components have been included in the package per
the packing list. Inspect the unit for damage. Retain the packing
materials and packing list.
3.2.2 If damage has occurred during shipping, a claim should be filed
with DeCrane Aerospace Audio International WITHIN 24 hours and
a Return Request Authorization Number shall be obtained from
DeCrane Aerospace Audio International by contacting the Repair
Department at 501.801.8101. Repackage the unit in its original
packaging materials and return it to DeCrane Aerospace Audio
International following instructions given by the DeCrane
Aerospace Audio International representative. Refer to the front
cover of this manual for address. If no return is necessary, retain
the packing list and the packing materials for storage.
