Dataq DI-710 Series Manuel utilisateur

The way PC-based instrumentation should be

DI-710 Series

16-Channel USB or Ethernet data logger

DI-715B Series

Ethernet Data Logger with Signal-Conditioned Inputs

User's Manual

Manual Revision S

DATAQ Instruments, Inc., except as otherwise indicated and shall not be reproduced, transmitted, transcribed, stored

in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, manual, or otherwise without expressed written authorization from the com-

pany. The distribution of this material outside the company may occur only as authorized by the company in writing.

DATAQ Instruments' hardware and software products are not designed to be used in the diagnosis and treatment of

humans, nor are they to be used as critical components in any life-support systems whose failure to perform can rea-

sonably be expected to cause significant injury to humans.

Designed and manufactured in the

United States of America

M-100762

Warranty and Service Policy

Product Warranty

DATAQ Instruments, Inc. warrants that this hardware will be free from defects in materials and workmanship under

normal use and service for a period of one year from the date of shipment. DATAQ Instruments' obligations under

this warranty shall not arise until the defective material is shipped freight prepaid to DATAQ Instruments. The only

responsibility of DATAQ Instruments under this warranty is to repair or replace, at its discretion and on a free of

charge basis, the defective material.

This warranty does not extend to products that have been repaired or altered by persons other than DATAQ Instru-

ments employees, or products that have been subjected to misuse, neglect, improper installation, or accident.

DATAQ Instruments shall have no liability for incidental or consequential damages of any kind arising out of the sale,

installation, or use of its products.

Service Policy

1. All products returned to DATAQ Instruments for service, regardless of warranty status, must be on a freight-pre-

paid basis.

2. DATAQ Instruments will repair or replace any defective product within 5 days of its receipt.

3. For in-warranty repairs, DATAQ Instruments will return repaired items to the buyer freight prepaid. Out of war-

ranty repairs will be returned with freight prepaid and added to the service invoice.

CAUTION

READ BEFORE CONNECTING INPUT SIGNALS TO YOUR DI-710

The DI-710 data acquisition device you have purchased and are about to use is NOT an ISOLATED product. This

means that it is susceptible to common mode voltages that could cause damage to the device. SUCH DAMAGE IS

NOT COVERED BY THE PRODUCT’S WARRANTY. Please read the following carefully before deploying the

product. Contact DATAQ Instruments Support at 330-668-1444 for all questions. If you have purchased a DI-715B

you do not need to follow these instructions.

This product can tolerate a maximum applied voltage of only ±20V peak without damage. Although you may be cer-

tain that the signal you want to measure is lower than this level, a common mode voltage (CMV) with an unknown

value may combine with your signal of interest to exceed this ±20V limit. In such instances, the product will be dam-

aged. Verify a CMV does not exist before connecting signals and acquiring data with your device. Use the following

procedure to check for CMV:

1. DO NOT connect your data acquisition device to the device under test. If the device under test is connected to

your data acquisition device, disconnect it.

2. Connect your data acquisition device to the appropriate interface on your PC (USB, Ethernet, RS-232 Serial, or

Parallel Printer Port).

3. Apply power to your data acquisition device, your PC, and the device under test.

4. Use a digital voltmeter to make the following measurements:

a. Measure the voltage (both the AC and DC range) between the ground terminal of your data acquisition

device and Signal+ of the device under test. This measurement should not exceed the Full Scale Range of

your data acquisition device.

b. Measure the voltage (both the AC and DC range) between the ground terminal of your data acquisition

device and Signal- of the device under test. This measurement should be at or very near 0 Volts.

c. Measure the voltage (both the AC and DC range) between the ground terminal of your data acquisition

device and Common of the device under test. This measurement should be at or very near 0 Volts.

5. Should ANY of these measurements exceed their recommendation DO NOT CONNECT SIGNALS to the data

acquisition device. A common mode voltage may exist that could destroy the instrument. You MUST determine

the source of the CMV and eliminate it before taking any measurements.

1Measured signal is not to exceed the Full Scale Range of your data acquisition device.

2Measured signal must be at or very near 0 volts.

3Measured signal must be at or very near 0 volts.

4Connect to AGnd (Analog Ground) port on DI-710 instruments.

Device

Under

Test

Signal + 1

Signal - 2

Common3

Digital Voltmeter

Data

Acquisition

Device

To PC

Ground4

DI-710 Series and DI-715B Series Hardware Manual

Table of Contents

vii

Table of Contents

Warranty and Service Policy ................................................................................................................ iii

CAUTION ........................................................................................................................................... v

1. Introduction ........................................................................................................................................ 1

Features .............................................................................................................................................. 1

Analog Inputs .................................................................................................................................... 2

Digital Input and Output .................................................................................................................... 2

Software ............................................................................................................................................. 3

WinDaq® Recording and Playback Software ............................................................................ 3

The DATAQ Instruments Hardware Manager ............................................................................ 3

Help ............................................................................................................................................. 3

2. Specifications ...................................................................................................................................... 5

Analog Inputs .................................................................................................................................... 5

Digital I/O .......................................................................................................................................... 5

A/D Characteristics ............................................................................................................................ 6

Scanning Characteristics .................................................................................................................... 6

Calibration ......................................................................................................................................... 6

USB Interface .................................................................................................................................... 6

Ethernet Interface .............................................................................................................................. 6

Removable Memory (Stand-alone Models only) .............................................................................. 6

Real Time Clock ................................................................................................................................ 6

Controls (Stand-alone Models only) .................................................................................................. 6

Indicators ........................................................................................................................................... 7

Transfer Rate to PC ........................................................................................................................... 7

General ............................................................................................................................................... 7

3. Installation .......................................................................................................................................... 9

Unpacking .......................................................................................................................................... 9

Installing the Device Drivers (USB Only) ........................................................................................ 9

Installing an Ethernet Device Directly Connected to your PC or Connected via a Hub or Switch Where

ONLY DI-71x Products are Installed ...................................................................................................... 11

Installing an Ethernet Device via a Distributed Network Without a DHCP Server .......................... 14

Installing an Ethernet Device via a Distributed Network with a DHCP Server ................................ 16

Installing WinDaq Software and the Dataq Instruments Hardware Manager ................................... 16

Activation of WinDaq/High Speed Option ....................................................................................... 18

Dataq Instruments Hardware Manager .............................................................................................. 18

4. Instrument Controls, Indicators, and Connections ........................................................................ 21

Connecting the DI-710 to Ground ..................................................................................................... 21

Instrument Front Panel ...................................................................................................................... 22

DI-710 Models ............................................................................................................................ 22

37-pin D sub connector ........................................................................................................ 23

DI-715B Models ......................................................................................................................... 24

Instrument Rear Panel ....................................................................................................................... 25

DI-710 models ............................................................................................................................. 25

DI-715B Models ......................................................................................................................... 26

Connecting Signals ............................................................................................................................ 27

Controls and Indicators ...................................................................................................................... 27

DI-710 Series and DI-715B Series Hardware Manual

Table of Contents

viii

Expansion (DI-715B Models) ..................................................................................................... 27

Power Input Jack ......................................................................................................................... 27

Power Switch (DI-715B Models) ................................................................................................ 27

Ground ......................................................................................................................................... 27

Interface Port ............................................................................................................................... 28

Control Button (Stand-alone Models) ......................................................................................... 28

Start Recording ..................................................................................................................... 28

Stop Recording ..................................................................................................................... 28

Formatting the Memory Card ............................................................................................... 28

Reconfigure Instrument ........................................................................................................ 28

Fix Errors .............................................................................................................................. 28

Mode LED Indicator ................................................................................................................... 29

Removable Storage Slot (MMC) (Stand-alone Models) ............................................................. 29

Installing a Shunt Resistor in DI-715B Models ................................................................................. 29

5. Operation ............................................................................................................................................ 31

PC-connected Models ........................................................................................................................ 31

Enabling/Disabling the Digital I/O and Remote Control ............................................................ 31

Channel Configuration for the DI-715B ..................................................................................... 31

Enabling Channels ................................................................................................................ 31

Calibration and Gain Settings ..................................................................................................... 32

High/Low Calibration ........................................................................................................... 32

Fixed Calibration .................................................................................................................. 32

Gain ...................................................................................................................................... 33

Stand-alone Models ........................................................................................................................... 33

PC-connected operation .............................................................................................................. 34

Networked operation as a data acquisition server (DI-710-ELS, DI-710-EHS, and DI-715B-ES

models) ..................................................................................................................................................... 34

Stand-alone data logger operation ............................................................................................... 34

The Stand-alone Set Up Panel ..................................................................................................... 34

Operation ..................................................................................................................................... 34

Troubleshooting .......................................................................................................................... 35

If power down occurs unexpectedly while recording to MMC/SD ............................................ 36

WinDaq Waveform Browser for MMC ...................................................................................... 37

6. Block Diagram .................................................................................................................................... 39

DI-710 Models ................................................................................................................................... 39

DI-715B Models ................................................................................................................................ 40

7. Accessories .......................................................................................................................................... 41

The DI-705 ......................................................................................................................................... 42

Using the DI-705 with DI-710 “D” Models ................................................................................ 42

Using the DI-705 with DI-715B Instruments .............................................................................. 43

The DI-205 (for use with DI-710 “D” models) ................................................................................. 44

Input/Output Panel Interconnections ........................................................................................... 44

Digital I/O - Analog Output .................................................................................................. 44

Input Signal Configuration .......................................................................................................... 45

Connecting a Single-ended Amplifier .................................................................................. 45

Connecting a Differential Amplifier ..................................................................................... 46

Ground-referenced Signal Sources ................................................................................ 46

Isolated Signal Sources .................................................................................................. 48

Signal Cable and the Differential Amplifier .................................................................. 48

DI-75B Backpack (for use with DI-715B models) ............................................................................ 49

DI-710 Series and DI-715B Series Hardware Manual

Table of Contents

Connecting the DI-75B to the Host Instrument .......................................................................... 49

Applying Power to the DI-75B ................................................................................................... 49

Features, Controls, and Indicators ............................................................................................... 50

DI-75B Front Panel .............................................................................................................. 50

DI-75B Rear Panel ............................................................................................................... 51

Removable Screw Terminal Block ................................................................................ 52

POWER switch .............................................................................................................. 52

POWER input jacks ....................................................................................................... 52

POWER status lamp ...................................................................................................... 52

POWER LOW lamp ...................................................................................................... 52

EXPANSION OUT connector ....................................................................................... 52

EXPANSION IN connector ........................................................................................... 52

Configuring Channels for the DI-75B ........................................................................................ 52

Calibration ............................................................................................................................ 53

Gain ...................................................................................................................................... 53

Installing Shunt Resistors ............................................................................................................ 53

DI-5B Modules .................................................................................................................................. 54

DI-5B30/31 Analog Voltage Input Modules, Narrow Bandwidth .............................................. 54

DI-5B32 Analog Current Input Modules .................................................................................... 55

DI-5B33 Isolated True RMS Input Modules .............................................................................. 56

DI-5B34 Linearized 2- or 3-Wire RTD Input Modules .............................................................. 57

DI-5B35 Linearized 4-Wire RTD Input Modules ....................................................................... 59

DI-5B36 Potentiometer Input Modules ....................................................................................... 61

DI-5B38 Strain Gage Input Modules, Narrow & Wide Bandwidth ........................................... 62

DI-5B40/41 Analog Voltage Input Modules, Wide Bandwidth ................................................. 64

DI-5B42 2-Wire Transmitter Interface Modules ........................................................................ 65

DI-5B43 Isolated DC Transducer Amplifier Input Module ........................................................ 66

DI-5B45 Frequency Input Modules ............................................................................................ 68

DI-5B47 Linearized Thermocouple Input Modules .................................................................... 69

DI-5B48 Accelerometer Input Modules ..................................................................................... 71

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dataq Enregistreur de données

Dataq

Dataq DI-245 Manuel utilisateur

Dataq

Dataq DI-2108-P Manuel utilisateur

Dataq

Dataq DI-2008 Manuel utilisateur

Dataq

Dataq DI-1110 Manuel utilisateur

Dataq

Dataq DI-1100 Manuel utilisateur

Dataq

Dataq DI-4108 Manuel utilisateur

Dataq

Dataq DI-4718B Manuel utilisateur

Dataq

Dataq DI-4730 Manuel utilisateur

Dataq

Dataq DI-718B Series Manuel utilisateur

Manuels Enregistreur de données populaires d'autres marques

TESTO

TESTO 176 Manuel utilisateur

HT Italia

HT Italia XL421 Manuel utilisateur

HBM

HBM SOMAT XR CX22B-R Manuel utilisateur

Agtrix

Agtrix 380i Manuel utilisateur

Hobo

Hobo H8 Pro Manuel utilisateur

Beijing ART Tech

Beijing ART Tech PCI2320 Manuel utilisateur

Athena

Athena GET SL1 Manuel utilisateur

Motec Systems

Motec Systems C185 Manuel utilisateur

Beijing ART Tech

Beijing ART Tech USB2832 Manuel utilisateur

Rotronic

Rotronic HygroLog HL20 Manuel utilisateur

MRC

MRC DW-6092 Manuel utilisateur

Racelogic

Racelogic VBOX LapTimer Manuel utilisateur

Edu-Logger

Edu-Logger 900-240 Manuel utilisateur

Elma

Elma DT173 Manuel utilisateur

MadgeTech

MadgeTech PRTemp140 Fiche technique

Comet

Comet U0121M Manuel utilisateur

pico Technology

pico Technology PT-104 Manuel utilisateur

Soil Instruments

Soil Instruments GTecLink Manuel utilisateur