DataMetrics 2200 Manuel utilisateur

DataMetrics Corporation

1717 Diplomacy Row

Orlando, Fl 32809

This manual is intended to function as an example ONLY and does not represent all configurations and options for this product.

Model 2200

Dot Matrix Printer

(24 VDC & 110/220VAC with Parallel Interface)

Operation and Maintenance Manual

DataMetrics Corporation

1717 Diplomacy Row

Orlando, Fl 32809

Phone: (407) 251-4577

Fax: (407) 251-4588

[email protected]

Data Rights Provisions

THE INFORMATION CONTAINED IN THIS MANUAL IS SUPPLIED WITH LIMITED RIGHTS ONLY. DATA

SHALL NOT, WITHOUT THE WRITTEN PERMISSION OF THE CONTRACTOR, BE EITHER (A) USED,

RELEASED, OR DISCLOSED IN WHOLE OR IN PART OUTSIDE THE GOVERNMENT, (B) USED IN

WHOLE OR IN PART BY THE GOVERNMENT FOR MANUFACTURE OR, IN THE CASE OF COMPUTER

SOFTWARE DOCUMENTATION, FOR PREPARING THE SAME OR SIMILAR COMPUTER SOFTWARE,

OR (C) USED BY A PARTY OTHER THAN THE GOVERNMENT, EXCEPT FOR: (1) EMERGENCY

REPAIR OR OVERHAUL WORK ONLY, BY OR FOR THE GOVERNMENT, WHERE THE ITEM OR

PROCESS CONCERNED IS NOT OTHERWISE REASONABLY AVAILABLE TO ENABLE TIMELY

PERFORMANCE OF THE WORK, PROVIDED THAT THE RELEASE OR DISCLOSURE HEREOF

OUTSIDE THE GOVERNMENT SHALL BE MADE SUBJECT TO A PROHIBITION AGAINST FURTHER

USE, RELEASE OR DISCLOSURE; OR (2) RELEASE TO A FOREIGN GOVERNMENT, AS THE

INTEREST OF THE UNITED STATES MAY REQUIRE, ONLY FOR INFORMATION OR EVALUATION

WITHIN SUCH GOVERNMENT OR THE CONDITIONS OF (1) ABOVE. THIS STATEMENT SHALL BE

INCLUDED ON ANY REPRODUCTION HEREOF.

Model 2200 Printer OPERATION AND MAINTENANCE

DataMetrics Corporation i

RECORD OF CHANGES

Date Revision Description of Change

040818 - INITIAL RELEASE

Model 2200 Printer OPERATION AND MAINTENANCE

DataMetrics Corporation ii

Contents

Contents................................................................................................................ii

Figures..................................................................................................................iv

Tables ...................................................................................................................iv

1. GENERAL INFORMATION.................................................................................................. 1

1.1. Introduction.................................................................................................................... 1

1.2. Applicable Documents................................................................................................... 1

1.3. Printer Description......................................................................................................... 1

1.3.1. Power Subsystem ............................................................................................................ 1

1.3.2. Printing Subsystem.......................................................................................................... 1

1.3.3. Control Panel .................................................................................................................... 2

1.3.4. External Interfaces........................................................................................................... 2

1.4. Specifications................................................................................................................ 2

1.5. Options.......................................................................................................................... 2

2. INSTALLATION......................................................................................................................... 5

2.1. Introduction.................................................................................................................... 5

2.2. Chassis Installation Configuration ................................................................................. 5

2.3. Unpacking ..................................................................................................................... 5

2.4. Ribbon Installation......................................................................................................... 5

2.5. Paper Installation........................................................................................................... 5

2.6. External Cable Installation............................................................................................. 6

2.7. Software Installation...................................................................................................... 6

2.8. Setup Utility................................................................................................................... 7

2.9. Limited Operation, Storage, and Transportation........................................................... 10

3. OPERATION............................................................................................................................. 16

3.1. Introduction................................................................................................................... 16

3.2. Controls and Indicators................................................................................................. 16

3.3. Self Test....................................................................................................................... 19

3.3.1. Printer................................................................................................................................ 19

3.4. Normal Operation......................................................................................................... 19

3.4.1. Stopping a Print Job........................................................................................................ 19

3.5. Error Conditions ...........................................................................................................19

3.6. Shutdown ..................................................................................................................... 19

4. FUNCTIONAL DESCRIPTION......................................................................................... 20

4.1. Introduction................................................................................................................... 20

4.1.1. Power Distribution........................................................................................................... 20

4.1.2. Printing Subsystem ......................................................................................................... 20

4.1.3. Control Panel.................................................................................................................... 20

4.1.4. Heaters.............................................................................................................................. 20

Model 2200 Printer OPERATION AND MAINTENANCE

DataMetrics Corporation iii

5. MAINTENANCE...................................................................................................................... 22

5.1. Introduction................................................................................................................... 22

5.2. Tools and Test Equipment............................................................................................ 22

5.3. Periodic Maintenance................................................................................................... 22

5.3.1. Cleaning and Lubrication................................................................................................ 22

5.3.2. Ribbon Cassette Re-Inking............................................................................................ 22

5.4. Fault Isolation............................................................................................................... 22

5.5. Replaceable Components and Subassemblies............................................................ 25

5.5.1. Ribbon Cassette.............................................................................................................. 27

5.5.2. Print Engine...................................................................................................................... 27

5.5.3. Power Supply................................................................................................................... 28

5.5.4. Circuit Breaker Assembly............................................................................................... 28

5.5.5. Transient Protection Circuit............................................................................................ 29

5.5.6. EMI Filter........................................................................................................................... 30

5.5.7. Controller Board............................................................................................................... 30

5.5.8. Control Panel Interface................................................................................................... 31

5.5.9. Control Panel.................................................................................................................... 31

Model 2200 Printer OPERATION AND MAINTENANCE

DataMetrics Corporation iv

Figures

Figure 2-1. Installation Dimensions............................................................................................... 11

Figure 2-2. Vehicle Adapter Mounting Dimensions..................................................................... 12

Figure 2-3. Ribbon and Paper Installation.................................................................................... 13

Figure 2-4. Rear Panel.................................................................................................................... 14

Figure 3-1. Front Panel.................................................................................................................... 16

Figure 3-2. Control Panel................................................................................................................ 17

Figure 4-1. Chassis Interconnections..................................................................................21

Figure 5-1. Periodic Maintenance Locations .......................................................................23

Figure 5-2. Replaceable Unit Locations ..............................................................................26

Tables

Table 1-1. Physical Specifications................................................................................................... 2

Table 1-2. Electrical Specifications.................................................................................................. 3

Table 1-3. Environmental Specifications........................................................................................ 3

Table 1-4. Printer Performance Specifications.............................................................................. 4

Table 2-1. Setup Utility Menus......................................................................................................... 8

Table 2-2. Setup Utility Function Keys.......................................................................................... 10

Table 2-3. External Connectors ..................................................................................................... 15

Table 3-1. Controls and Indicators................................................................................................. 18

Table 5-1. Fault Isolation................................................................................................................. 24

Table 5-2. Field Replaceable Units ............................................................................................... 25

Model 2200 Printer OPERATION AND MAINTENANCE

DataMetrics Corporation 1

1. GENERAL INFORMATION

1.1. Introduction

This manual provides information and instructions required for the operation and

maintenance of the Model 2200 Dot Matrix Printer manufactured by DataMetrics

Corporation.

1.2. Applicable Documents

Military Standards

MIL-STD-461C Electromagnetic Emission and Susceptibility Requirements for

the Control of Electromagnetic Interference

MIL-STD-810D Environmental Test Methods

Commercial Standards

IEC 1000-4-2 Electrostatic Discharge Immunity Test

IEC 1000-4-4 Electrical Fast Transient/Burst Immunity Test

1.3. Printer Description

The Model 2200 Dot Matrix Printer is a ruggedized, general-purpose dot matrix printer that

is configured in a single enclosure. The equipment is packaged using environmental

management techniques that protect internal components from shock, vibration,

temperature extremes, and EMI/RFI. The chassis is configured with a mechanically isolated

vehicle mounting adapter. The printer includes the following primary functional elements:

• Power subsystem

• Printing subsystem

• Control panel

• Ethernet subsystem

• External interfaces

1.3.1. Power Subsystem

The Model 2200 Dot Matrix Printer operates with 24 VDC & 110/220 VDC input power. The

power subsystem includes a power protection circuit, EMI filter, power switch/circuit breaker,

and power supply.

1.3.2. Printing Subsystem

The Model 2200 Dot Matrix Printer incorporates a Panasonic Model KX-P2130 dot matrix

print engine that provides letter quality (30 x 24 dpi) resolution with a minimum print speed

of 56 cps. Print speeds up to 250 cps are supported in draft mode. The printer controller

includes a 14 Kbyte buffer that is expandable to 46 Kbyte. The printer may be operated

with any host computer that supports Windows or DOS operating environments.

Model 2200 Printer OPERATION AND MAINTENANCE

DataMetrics Corporation 2

The printer supports Epson LQ-860 and IBM Proprinter X24E emulation with a variety of

fonts and character sets. Printing is accomplished in bi-directional mode. The printer

utilizes tractor-fed fan-fold paper that is stored in a removable tray. Printed paper exits the

chassis through an aperture in the top cover of the unit. The printer supports paper with a

width of 4 to 11.7 inches and length of 5 to 14.3 inches.

1.3.3. Control Panel

The control panel is located at the printer front panel. This panel is the operator interface for

print operations other than those controlled from the host computer. Controls and indicators

are described in Chapter 3.

1.3.4. External Interfaces

The rear panel of the Model 2200 Dot Matrix Printer includes connectors for prime power

and the host computer data interface. A chassis ground lug is located on the rear panel

below the power connector. The printer incorporates a Centronics parallel data interface.

External connector assignments are identified in Chapter 2.

1.4. Specifications

Equipment specifications for the Model 2200 Dot Matrix Printer are defined in Tables 1-1

through 1-4.

1.5. Options

The standard printer memory buffer (14 Kbytes) may be increased to 46 Kbytes by

incorporation of a 32 K expansion buffer chip.

Table 1-1. Physical Specifications

Characteristic Description

Dimensions (1) 43 cm wide x 25 cm high x 33.7 cm deep

Weight (1) 14.5 kg

(1) Including vehicle-mounting adapter.

Model 2200 Printer OPERATION AND MAINTENANCE

DataMetrics Corporation 3

Table 1-2. Electrical Specifications

Characteristic Description

Input Voltage 24VDC & 110/220 VAC

Output Current

5 Vdc

39 Vdc

2 A

6 A

Power Consumption 28/74 W (1)

(1) Idle/active printing mode.

Table 1-3. Environmental Specifications

Characteristic Description

Temperature

Operating

Non-operating

-25 to 55oC

-30 to 71oC

Relative humidity (non-condensing) Up to 90%

Altitude (operating) 3,000 m

Vibration (operating) MIL-STD-810D, Figure 514.3-10 through

514.3-22.

Shock

Non-operating

Operating

20 g, 6 ms

15 g, 6 ms

EMI/EMC MIL-STD-461C, Part 4, Methods RE02,

RS03, and RS05.

IEC 1000-4-2, Level 3

IEC 1000-4-4, Level 3

Model 2200 Printer OPERATION AND MAINTENANCE

DataMetrics Corporation 4

Table 1-4. Printer Performance Specifications

Characteristic Description

Fonts

Draft

Letter quality

Pica, Elite, and Micron.

Roman, Sans Serif, Courier, Prestige, Script, OCR-B, and

Bold PS.

Character sets 96 regular and italic ASCII characters

33 international characters (14 countries and Legal set)

158 IBM-PC special characters

38 multilingual characters

Dot configuration

Diameter

Matrix

Pitch

0.2 mm

9 x 24 (draft) and 30 x 24 (letter quality)

Draft: 0.21 (horizontal) x 0.14 mm (vertical)

Letter quality: 0.07 (horizontal) x 0.14 mm (vertical)

Characters per inch (cpi)/

per line (cpl) Pica: 10 cpi/80 cpl

Elite: 12 cpi/96 cpl

Micron: 15 cpi/120 cpl

Compressed: 17 cpi/137 cpl

Elite compressed: 20 cpi/160 cpl

Pica elongated: 5 cpi/40 cpl

Elite elongated: 6 cpi/48 cpl

Micron elongated: 7.5 cpi/60 cpl

Compressed elongated: 8.5 cpi/68 cpl

Elite compressed elongated: 10 cpi/80 cpl

Printing speed {characters

per second (cps)}

Micron

Elite

Pica

250 cps (draft) and 83 cps (letter quality)

200 cps (draft) and 67 cps (letter quality)

167 cps (draft) and 56 cps (letter quality)

Service life

Printhead

Ribbon

200 million strokes for black ribbon in draft mode

3 million characters for black ribbon in draft mode

Table des matières

Autres manuels DataMetrics Imprimante

DataMetrics

DataMetrics 1980 Series Manuel utilisateur

DataMetrics

DataMetrics 4080B Guide de dépannage

DataMetrics

DataMetrics 2000 Series Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur