Datalogic DLR-BT001 Series Manuel d'installation et d'exploitation
DLR-BT001-xx Family
RFID UHF Bluetooth® Pocket Reader
EU/US
Product Reference Guide
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Telephone: +39 051 3147011
Fax: +39 051 3147288
©2017 Datalogic S.p.A. and/or its affiliates
• All rights reserved. • Without limiting the rights under copy-
right, no part of this documentation may be reproduced,
stored in or introduced into a retrieval system, or transmitted
in any form or by any means, or for any purpose, without the
express written permission of Datalogic S.p.A. and/or its affil-
iates ("Datalogic"). Owners of Datalogic products are hereby
granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any
proprietary notices, including copyright notices, contained in
this documentation and shall ensure that all notices appear
on any reproductions of the documentation.
Should future revisions of this manual be published, you can
acquire printed versions by contacting your Datalogic repre-
sentative.
Electronic versions may either be downloadable from the Dat-
alogic website (www.datalogic.com) or provided on appropri-
ate media. If you visit our website and would like to make
comments or suggestions about this or other Datalogic publi-
cations, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide informa-
tion in this manual that is complete and accurate, however,
Datalogic reserves the right to change any specification at any
time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and
the E.U.
DLR-BT001-XX is a trademark of Datalogic S.p.A. and/or its
affiliates. The Bluetooth word mark and logos are owned by
Bluetooth SIG, Inc. and any use of such marks by Datalogic
Group companies is under license. All other trademarks and
brands are property of their respective owners.
Product Reference Guide i
Table of Contents
RFID Reader DLR-BT001 .................................................... 1
General Information ........................................................................1
General Features ............................................................................. 2
Using the DLR-BT001 .....................................................................2
Front Panel Description ........................................................4
Acoustic and Vibration ..........................................................5
Charging the Battery ......................................................................5
USB Connector ........................................................................ 6
Not Removable Battery .........................................................6
Accessories ......................................................................................6
Disposal of the Product .................................................................. 7
Technical Specifications .................................................................8
Reader-Tag Link Profiles ................................................................9
Radiation Patterns ........................................................................10
Model – EU (ETSI) ........................................................ 10
Model – US (FCC) ......................................................... 11
Getting Started.................................................................. 13
Introduction ...................................................................................14
Using DLR-SW Profile ...................................................................15
Display Options in the DLR-SW Profile ......................................19
Reader-Host Communication Setup: Possible Cases ...............21
Options List in the HID Profile .....................................................29
FORMAT ....................................................................... 29
DISPLAY ....................................................................... 30
APPLEKB...................................................................... 30
Using BUFFER Profile....................................................... 31
Resetting the DLR-BT001-XX Reader ........................................32
DLR-BT001-XX Configuration
of Main Menu & Aux Menu.............................................. 33
Introduction ...................................................................................33
PROFILE ....................................................................... 34
BEEP............................................................................. 35
VIBRATE ....................................................................... 36
POWER......................................................................... 37
CLOCK........................................................................... 37
Firmware Upgrade ............................................................ 39
Datalogic Limited Factory Warranty ...........................................41
Services and Support ....................................................................44
ii RFID Bluetooth® Pocket Reader DLRBT001
NOTES
Product Reference Guide 1
RFID Reader DLR-BT001
General Information
The DLR-BT001-XX is a feature-rich hand-held UHF RFID
Reader. It is available in two different models to fit the dif-
ferent frequency standards in the EU and US regions.
The reader is compliant with UHF RFID ISO 18000-63 and
EPC Class 1 Gen 2 standards. The reference document is:
"EPC Radio-Frequency Identity Protocols Generation-2
UHF RFID", Protocols for Communications at 860MHz-
960MHz, Version 2.0.1 (April 23, 2015).
The DLR-BT001-XX has an integrated antenna suited for
short to medium range applications. Thanks to the Blue-
tooth® communication interface, it is a perfect UHF RFID
add-on for any Bluetooth® enabled host such as a PC, a
smartphone, a PDA or a tablet. The reader is compatible
with Windows XP/7/8/8.1, Windows CE/Mobile and
Android. A micro-USB connector conceived mainly for
power recharge purposes, is also a useful communication
interface.
The reader can also operate in “Buffer Mode”, allowing to
store EPC codes into the internal memory when the com-
munication links (USB or Bluetooth®) are not available.
Table 1- Models P/N
MODEL P/N RF carrier freq
DLR-BT001-EU
865.6 ÷ 867.6 MHz
DLR-BT001-US
902.0 ÷ 928.0 MHz
WARNING
The battery is not initially fully charged.
Charge it before use. See Charging the
Battery on page 5.
RFID Reader DLR-BT001
2 RFID Bluetooth® Pocket Reader DLRBT001
General Features
The DLR-BT001-XX supports a Bluetooth® native key-
board emulation allowing to interact directly with legacy
application, office automation SW or any other generic
solution requiring manual input. When paired to a smart-
phone or to a tablet, the Device is a cost-effective alterna-
tive to more expensive handheld devices. Designed for
mobile operators in indoor or outdoor1areas, DLR-BT001-
XX is ideal for in-store inventory management, field sales
mobility, service & maintenance applications.
The device easily performs the reading of a population of
UHF Tags being located in its proximity and preferably in
front of it.
When the Host / Reader Link is not available, the reader is
able to operate in "Buffer Profile", allowing the storage of
EPC codes into its internal memory for a later download.
Special attention has been given to minimize the current
consumption and extend battery duration by limiting the
active reading time.
A USB connection is mainly dedicated to battery charge,
but could act as an auxiliary virtual com port (VCP) useful
during setup, configuration and downloading actions.
Using the DLR-BT001
The DLR-BT001-XX is a hand-held UHF RFID reader with
integrated antenna. The reader can send EPC codes to a
PC, tablet or smartphone via USB or Bluetooth. The
reader’s front panel is the user interface.
1. Pay attention to the weather conditions because the
device is not waterproof.
RFID Reader DLR-BT001
Product Reference Guide 3
Figure 1. DLR-BT001-XX Front Panel
RFID Reader DLR-BT001
4 RFID Bluetooth® Pocket Reader DLRBT001
Front Panel Description
The front panel is illustrated in Figure 1. on page 3and its
five main features are described in the table below:
Table 2- Front Panel LEDs and Buttons
N° Name Description
1
Display LCD Alphanumeric Display (8 chars x 2 lines).
2
Link LED Indicates the Bluetooth® and USB/charger
connection (refer to
Table 4 on page 5
).
3
Power LED Indicates the reader status and battery level
(refer to
Table 3 on page 5
).
4
Trigger Button
In Inventory mode: press it shortly to per-
form a single inventory cycle (hold it down to
repeat multiple inventory cycles).
From initial ON state: press it within 2 sec-
onds to enter the Main Menu Mode.
In Menu mode: quick press it to scroll. Hold
down for a few seconds to activate the
option displayed.
5
Power Button
From OFF: Press it to switch the reader ON.
From initial ON state: press it shortly to
enter the second Aux Menu Mode (Format -
Display Option settings).
From ON: hold down for more than 2 sec-
onds to switch the reader OFF
a
.
In Menu modes: press to return to the Main
Menu.
a. Only in DLR-SW or HID profiles.
RFID Reader DLR-BT001
Product Reference Guide 5
Table 3- Reader Power LED Status Table
Table 4- Reader Bluetooth LED Status Table
Acoustic and Vibration
Two events signaling resources complete the User Inter-
face:
•TwotonesBuzzer
•Vibrator.
Charging the Battery
The DLR-BT001-XX unit is supplied with a USB cable you
can connect to a PC with a USB host port or to a 5 V power
supply (with USB output).
When you put the reader in charge, the display lights up
and shows the blinking charge indicator. A fixed indication
"charge 100%" informs you when the charge is complete.
Status Description
Green Reader is active and the battery charge is in the
range of 35÷100%.
Orange Reader is active and the battery charge is in the
range of 15÷35%
Red Reader is active and the battery charge is in the
range of 0÷15%
Status Description
OFF No Connection established
Orange USB Cable connected (either to a PC or to the AC
adapter)
Blue Bluetooth® connected
RFID Reader DLR-BT001
6 RFID Bluetooth® Pocket Reader DLRBT001
USB Connector
A micro USB Type B socket connector is located in the bot-
tom side of DLR-BT001-XX. It can be used to connect the
reader to a USB host port or to a AC/DC battery charger.
Not Removable Battery
Due to its nature and dimensions, DLR-BT001 has a fixed
rechargeable battery. It is strictly forbidden to remove it
for charging or any other purpose. The charge will be per-
formed using exclusively the micro USB connector.
Accessories
Figure 2. Set of Accessories (Delivered with DLR-BT001)
WARNING
If the battery is completely low, the display
may not turn on when the charger is
connected. In this case, leave the reader
connected to the charger for at least 5
minutes; then disconnect the USB cable and
perform the reset procedure described in
Resetting the DLR-BT001-XX Reader on
page 32). Switch off the reader by pressing
the power button and then connect the USB
cable again.
WARNING
Any attempt to access or replace the battery
will cause an infringement of the warranty.
In case of battery malfunction, please call
Datalogic technical assistance.
No. 1 B to A Type Micro USB
cable No. 1 Power supply
Autres manuels pour DLR-BT001 Series
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Datalogic Autre
