Datalogic Memor 1 Manuel utilisateur

Memor™ 1

3-Slot Cradle

Installation Guide

Datalogic S.r.l.

Via San Vitalino 13

40012 Calderara di Reno (BO)

Italy

Tel. +39 051 3147011

Fax +39 051 3147205

this documentation may be reproduced, stored in or introduced into a retrieval

system, or transmitted in any form or by any means, or for any purpose,

without the express written permission of Datalogic S.p.A. and/or its

affiliates. Owners of Datalogic products are hereby granted a non-exclusive,

revocable license to reproduce and transmit this documentation for the

purchaser's own internal business purposes. Purchaser shall not remove or

alter any proprietary notices, including copyright notices, contained in this

documentation and shall ensure that all notices appear on any reproductions

of the documentation. Should future revisions of this manual be published,

you can acquire printed versions by contacting your Datalogic representative.

Electronic versions may either be downloadable from the Datalogic website

(www.datalogic.com) or provided on appropriate media. If you visit our

website and would like to make comments or suggestions about this or other

Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this

manual that is complete and accurate, however, Datalogic reserves the right

to change any specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.

in many countries, including the U.S.A. and the E.U. Memor is a trademarksof

Datalogic S.p.A. and/or its affiliates. All other brand and product names may

be trademarks of their respective owners.

Patents

Patent. See www.patents.datalogic.com for patent list.

Installation Guide i

Table of Contents

Introduction ....................................................................... 1

Dispenser Design Guidelines ........................................... 3

Functional Areas ..........................................................................3

Base Unit Configuration ..............................................................5

Configuration J0 ............................................................................... 7

Configuration J1 ............................................................................... 8

Configuration J2 ............................................................................... 9

Configuration J3 ............................................................................. 10

Configuration J4 ............................................................................. 11

Configuration J5 ............................................................................. 12

Configuration J6 ............................................................................. 13

Configuration J7 ............................................................................. 14

Configuration J8 ............................................................................. 15

Configuration J9 ............................................................................. 16

Configuration J10 ........................................................................... 17

Configuration J11 ........................................................................... 18

Base Unit Configurations Summarizing Table ........................... 18

Ventilation Grilles Position ........................................................... 20

Shopper Unit Placing and Unity Definition ................................. 21

Dispenser Construction Details.................................... 23

Base Unit Description ............................................................... 23

Memor 1 3-Slot Cradle Installation ............................................. 23

Remove the Memor 1 from the 3-Slot Cradle ............................ 28

Base Unit Construction Details - Pattern Holes ........................ 29

Anchoring and Maintenance Issues ............................................ 38

Protection Against Cart/Trolley Impacts .................................... 38

Power Supply ............................................................................. 39

ii Memor™ 1 3-Slot Cradle

Powering the Cradle ...................................................................... 41

LED Indicators ..................................................................................45

Radio Technologies and Frequency Bands .............................47

Technical Specifications ............................................................48

Maintenance ...............................................................................50

Cleaning .......................................................................................... 50

Safety Precautions .....................................................................51

Cabinet ............................................................................................ 51

Installation Guide 1

Introduction

The purpose of this document is to provide helpful instructions

about designing and building a cabinet to house the Memor 1 3-Slot

Cradles. The first part of the document gives information useful to

build the best dispenser layout, according to the retail environment

needs. In this section you can find some indications coming from

Datalogic direct experience in different kinds of retail environments.

The layout indications are suggestions to help design a functional

cabinet.

The second part of the document gives some technical details

needed to build a vertical dispenser. Drawings and descriptions in

this section are provided as indications about constraints that must

be followed to properly install the cradles into the cabinet and not as

comprehensive and detailed rules to build up the cabinet itself. The

drawings and the pictures in this document apply to a wood cabinet.

It is however possible, using the same indications, to use a different

material.

Introduction

2 Memor™ 1 3-Slot Cradle

NOTES

Installation Guide 3

Dispenser Design Guidelines

Functional Areas

The Memor 1 is also suitable for an effective communication inside

the retail environment, thanks to the high quality of its display. For

this reason, it is important to design the arrangement of the device

in a dispenser to bring out the performances without compromising

the functionality. The following drawing shows the most profitable

way to place the devices following their height from the floor.

• The devices placed in the higher part of the dispenser –

between 1m and 1.60m – perform their communicative

function in the most profitable way. So, in this area, it is

preferable to maximize the display visibility, even if this means

to fit a smaller quantity of devices. ·

• The devices lodged in the lower part of the dispenser – below 1

m. of height – do not offer a clear display visibility and cannot

fully exploit their own communicative potential, therefore this

area is suitable to maximize the devices density.

Dispenser Design Guidelines

4 Memor™ 1 3-Slot Cradle

Dispenser Design Guidelines

Installation Guide 5

Base Unit Configuration

The preceding paragraphs provided some general rules on building a

base unit, taking into account the space required for the cabinet, the

density and the display visibility. Every retail environment has

different and specific needs and constraints: some may need a tall

base (but not deep or large), some may need a short base but can

accept larger and bulkier sizes.

There are basically two different solutions organizing the

disposition of the devices:

• High Visibility Configuration

• High Density Configuration

In field, however, practical solutions mix up vertical and diagonal

layout in different manner. The following paragraphs shows some

example solutions that you can refer to when designing your own

solution. A three columns base unit is used as a sample model.

Dispenser Design Guidelines

6 Memor™ 1 3-Slot Cradle

NOTE

To guarantee full stability, the cabinet must be anchored to

the wall or to the floor. (see Anchoring and Maintenance

Issues on page 38)

The front door dispenser must have a jamb of 20 cm, to

allow the front door to open.

Autres manuels pour Memor 1

Table des matières

Autres manuels Datalogic Station d'accueil

Datalogic

Datalogic J Series Manuel utilisateur

Datalogic

Datalogic Single Ethernet Cradle Memor Manuel utilisateur

Datalogic

Datalogic Lynx D Manuel utilisateur

Datalogic

Datalogic Memor X3 Manuel utilisateur

Datalogic

Datalogic Jet Manuel utilisateur

Datalogic

Datalogic Falcon X3 Manuel utilisateur

Datalogic

Datalogic JoyaTouch Manuel utilisateur

Datalogic

Datalogic OM-GRYPHON SERIES Manuel utilisateur

Datalogic

Datalogic DL-AXST Single Slot Dock Manuel utilisateur

Datalogic

Datalogic JOYA X2 Single Slot Dock Manuel utilisateur

Datalogic

Datalogic Memor 1 Manuel utilisateur

Datalogic

Datalogic Memor Manuel utilisateur

Datalogic

Datalogic Skorpio Manuel utilisateur

Datalogic

Datalogic Memor 10 Manuel utilisateur

Datalogic

Datalogic Memor X3 Manuel utilisateur

Datalogic

Datalogic DH60 Manuel utilisateur

Datalogic

Datalogic Kyman-NET Single Cradle Desk Manuel utilisateur

Datalogic

Datalogic MEMOR K Single Slot Dock Manuel utilisateur

Datalogic

Datalogic Elf/Falcon X3 Manuel utilisateur

Datalogic

Datalogic Single Ethernet Cradle Memor Manuel utilisateur

Datalogic

Datalogic DL-AXIST Single Ethernet Dock Manuel utilisateur

Datalogic

Datalogic MEMOR 20 Manuel utilisateur

Datalogic

Datalogic Viper CE Cradle Manuel utilisateur

Datalogic

Datalogic Lynx Four Slot Dock Manuel utilisateur

Manuels Station d'accueil populaires d'autres marques

Sony

Sony Dream Machine XDR-DS12iP Manuel utilisateur

Acer

Acer USB Type-C Dock II Manuel utilisateur

ATEN

ATEN UC-2000 Manuel utilisateur

Xcellon

Xcellon HDD-202 Manuel utilisateur

Dok

Dok CR09 Manuel utilisateur

Philips

Philips BTM630/12 Manuel utilisateur

IOGear

IOGear Travel Pro GUD3C09 Manuel utilisateur

RKI

RKI SDM-E2 Manuel utilisateur

iHome

iHome iP15 Manuel utilisateur

VITURE ONE

VITURE ONE MOBILE DOCK Manuel utilisateur

Lindy

Lindy 42984 Manuel utilisateur

CipherLab

CipherLab 8001 Manuel utilisateur

Pyle

Pyle PIPDSP2 Manuel utilisateur

Avol

Avol AS2350 Manuel utilisateur

Philips

Philips DC190/79 Manuel utilisateur

Targus

Targus DOCK315EUZ Manuel utilisateur

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuel utilisateur

Sirius Satellite Radio

Sirius Satellite Radio SUBX2082808a Manuel utilisateur