DataLocker DL3 Manuel utilisateur

USER MANUAL

DL3/DL3 FE

------------------------- March 2015 -------------------------

Contents

At a Glance

Troubleshoot

Introduction

Forgotten password

About the DL3

Initialize & format your drive

Getting Started

Miscellaneous

First time setup

Linux configuration

Admin password

Frequently asked questions

User password

Contact support team

Main screen

Disconnecting your DL3™

Basics

Administrator controls

System menu

User options

Self-destruct mode

Advanced

RFID authentication

Virtual CD partition

Read-only mode

Auto-lock

At a Glance

INTRODUCTION

Congratulations on your purchase of the DataLocker DL3™ Encrypted Hard

Drive. This user manual is intended to help you configure your device. Because

DataLocker is constantly updating its products, the images and text in this

manual may vary slightly from the images and text displayed by your

DataLocker DL3™. These changes are minor and should not affect the ease of

setup adversely.

Updated software and documentation are freely available for download at our

website:

Visit datalocker.com | Go to support !downloads

The DataLocker DL3™ stands alone as the only external hard drive equipped

with a patented, on board, LCD touch screen. This feature allows the user to

conveniently perform all processes directly through the LCD Interface, making it

truly 100% platform independent.

Although the DataLocker DL3™ is extremely user friendly, it is recommended

that you review this guide to ensure that you become fully acquainted with the

DataLocker DL3™ and all of its features.

To register your product, please visit our website and fill out the online form

under the Support tab to complete the product registration.

ABOUT THE DL3™

The DataLocker DL3™ has a minimum power requirement of 5 Volts and 1A of

current that is drawn from the USB port. The DataLocker DL3™ utilizes 256-bit AES

encryption operating in XTS mode to fully encrypt your drive’s contents. The

DataLocker DL3 FE™ (FIPS Edition) has FIPS validated components and two

independent crypto processors. Data undergoes two passes of 256-bit AES

encryption – the first pass being in XTS mode, the second pass in FIPS 140-2

validated CBC mode – before it is stored on the hard drive

The DataLocker DL3™ comes

preformatted with Windows

NTFS file system. All major file

systems are supported (HFS,

NTFS, EXT, FAT).

If you require a different file

system, please consult your

operating system for initialization

and formatting instructions.

For more information on initializing and formatting your DL3™, skip to page 27.

Getting Started

FIRST TIME SETUP

This section will guide you through the necessary steps to set up the DL3™ drive

for the first time around. It is highly recommended that you set a new

administrator password using alphanumeric characters.

Step 1: Connect the DL3™ to your computer with the included USB cable.

Step 2: At the

startup screen

press [START].

Step 3: Enter the

default password

000000.

Then press the [↵]

symbol.

Step 4: Press the

[SETUP] button on

the touch screen.

If it is not selected

within 3 seconds,

the DataLocker

DL3™ will connect

to the computer

automatically.

Step 5: At the setup

menu press the

[CHANGE PASSWORD]

button.

Step 6: Press the [CONTINUE] button and then enter in the

current password, which is 000000. Please follow the

onscreen instructions to set your new password. It is

recommended that you use a combination of both alpha

and numeric characters for your password.

Step 7: After the new password has

been set. You may set other options or

go back to the CONNECT menu by

pressing the button located at the

top left hand corner next to SETUP.

Then press the [CONNECT] button to

start using your DL3™ drive.

WARNING: A lost or forgotten password cannot be reset or recovered without

losing all of the stored data.

After you press the [CONNECT] button

on the DL3™ drive, it will begin

connecting to the computer. By

default, Windows will show an

AutoPlay dialog once the drive has

successfully connected.

In Windows Explorer you will now see a new drive called “DataLocker” listed in

the Hard Disk Drives section. A new drive letter will be automatically assigned to

this drive. You may now start using your DL3™ drive!

ADMINISTRATOR PASSWORD

The process of changing the administrator password is identical to the setup

process. It is highly recommended that you set a new administrator password

using alphanumeric characters.

Step 1: Power on your DL3™ by

plugging it in to your computer. If the

drive is already connected, press the

[DISCONNECT] button and then press

the [CONNECT] button on the next

screen.

Step 2: Once at the

keypad screen,

enter the admin

password. If the

password has not

been changed,

enter the default

Step 3: Press the

[SETUP] button on the

touch screen. If the

[SETUP] button is not

selected within 3

seconds, the

DataLocker DL3™ will

password, 000000,and press the [↵]

symbol.

automatically connect to the host

computer.

Step 4: At the setup menu press the [CHANGE PASSWORD]

button.

10"

Step 5: Press the [CONTINUE] button and then enter in the

current password, which is 000000. Please follow the

onscreen instructions to set your new password. It is

recommended that you use a combination of both alpha

and numeric characters for your password.

Step 6: After the new password has been set,

you may set other options, or save and go

back to the CONNECT menu by pressing the

button located at the top left hand corner next

to SETUP. Then press the [CONNECT] button to

start using the DL3™ drive.

WARNING: A lost or forgotten password cannot be reset or recovered without

losing all the stored data. If you disable the self-destruct function, you risk being

permanently locked out of your device without the option of resetting the DL3™

back to its factory state.

Autres manuels pour DL3

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DataLocker Stockage

DataLocker

DataLocker H200 Manuel utilisateur

DataLocker

DataLocker Sentry K300 Manuel utilisateur

DataLocker

DataLocker Sentry K300 Guide de référence rapide

DataLocker

DataLocker H300 Manuel utilisateur

DataLocker

DataLocker DL3 Manuel utilisateur

DataLocker

DataLocker Sentry K350 Manuel utilisateur

DataLocker

DataLocker Sentry ONE Standard Manuel utilisateur

DataLocker

DataLocker H100 Manuel utilisateur

DataLocker

DataLocker Sentry EMS Manuel utilisateur

DataLocker

DataLocker DL4 FE Manuel utilisateur

DataLocker

DataLocker DL3 Manuel utilisateur

DataLocker

DataLocker Sentry K300 Manuel utilisateur

DataLocker

DataLocker DL3 Manuel utilisateur

DataLocker

DataLocker IronKey EMS H350 Enterprise Manuel utilisateur

DataLocker

DataLocker Sentry K350 Manuel utilisateur

DataLocker

DataLocker DL3 Manuel utilisateur

DataLocker

DataLocker SENTRY 3 FIPS Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur