Data Video TWP-10 Manuel utilisateur
TWP-10
4K VIDEO WALL
PROCESSOR 2x2
Instruction Manual
2
Table of Contents
FCC COMPLIANCE STATEMENT ........................................................................................................................3
WARNINGS AND PRECAUTIONS.......................................................................................................................3
WARRANTY......................................................................................................................................................4
STANDARD WARRANTY ............................................................................................................................................ 4
THREE YEAR WARRANTY........................................................................................................................................... 4
DISPOSAL.........................................................................................................................................................5
1. INTRODUCTION .......................................................................................................................................6
FEATURES .............................................................................................................................................................. 6
2. CONNECTIONS AND CONTROLS ...............................................................................................................7
FRONT PANEL......................................................................................................................................................... 7
REAR PANEL........................................................................................................................................................... 7
3. HOW TO SET UP THE TWP-10 ..................................................................................................................9
4. SOFTWARE CONTROL PROGRAM ..........................................................................................................10
4.1 START THE SOFTWARE CONTROL PROGRAM .................................................................................................. 10
4.2 PROGRAM INTERFACE ............................................................................................................................... 11
I. Connection Status ............................................................................................................................... 11
II. Quick Setting Selection........................................................................................................................ 11
III. EDID (Extended Display Identification Data)................................................................................... 15
IV. Advanced Setting ............................................................................................................................ 17
V. 4K Setting ............................................................................................................................................ 18
VI. IP Configure..................................................................................................................................... 18
VII. Info.................................................................................................................................................. 19
VIII. Refresh ............................................................................................................................................ 19
5. FIRMWARE UPDATE ..............................................................................................................................20
6. FREQUENTLY-ASKED QUESTIONS ..........................................................................................................21
7. DIMENSIONS & WEIGHT ........................................................................................................................22
8. SPECIFICATIONS ....................................................................................................................................23
SERVICE AND SUPPORT..................................................................................................................................24
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo
Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies
cannot exclude that some information in this manual, from time to time, may not be correct or may be
incomplete. This manual may contain typing errors, omissions or incorrect information. Datavideo
Technologies always recommend that you double check the information in this document for accuracy before
making any purchase decision or using the product. Datavideo Technologies is not responsible for any
omissions or errors, or for any subsequent loss or damage caused by using the information contained within
this manual. Further advice on the content of this manual or on the product can be obtained by contacting
your local Datavideo Office or dealer.
3
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing
serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To
ensure safe and reliable operation of this unit, and to protect it from overheating, do not
block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar
surface, as the ventilation openings on the bottom of the cabinet will be blocked. This
unit should never be placed near or over a heat register or radiator. This unit should not
be placed in a built-in installation unless proper ventilation is provided.
7. This product should only be operated from the type of power source indicated on the
marking label of the AC adapter. If you are not sure of the type of power available,
consult your Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the
power cord will be walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere
ratings on the products plugged into the extension cord do not exceed the extension
cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall
outlet do not exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as
they may touch dangerous voltage points or short out parts that could result in risk of
fire or electric shock. Never spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this
product yourself. Opening or removing covers that are marked “Do Not Remove” may
expose you to dangerous voltage points or other risks, and will void your warranty. Refer
all service issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under
the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions.
Adjust only those controls that are covered by the operating instructions in this
manual; improper adjustment of other controls may result in damage to the unit and
4
may often require extensive work by a qualified technician to restore the unit to
normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for
service.
Warranty
Standard Warranty
•Datavideo equipment are guaranteed against any manufacturing defects for one year
from the date of purchase.
•The original purchase invoice or other documentary evidence should be supplied at the
time of any request for repair under warranty.
•The product warranty period beings on the purchase date. If the purchase date is
unknown, the product warranty period begins on the thirtieth day after shipment from a
Datavideo office.
•Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not
covered under warranty.
•Viruses and malware infections on the computer systems are not covered under
warranty.
•Any errors that are caused by unauthorized third-party software installations, which are
not required by our computer systems, are not covered under warranty.
•All mail or transportation costs including insurance are at the expense of the owner.
•All other claims of any nature are not covered.
•Cables and batteries are not covered under warranty.
•Warranty only valid in the country or region of purchase.
•Your statutory rights are not affected.
Three Year Warranty
•All Datavideo products purchased after July 1st, 2017 are qualified for
a free two years extension to the standard warranty, providing the
product is registered with Datavideo within 30 days of purchase.
•Certain parts with limited lifetime expectancy such as LCD panels, DVD
drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera
module, PCIe Card are covered for 1 year.
•The three-year warranty must be registered on Datavideo's official website or with your
local Datavideo office or one of its authorized distributors within 30 days of purchase.
5
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this
product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste
electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your
waste equipment for recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
CE Marking is the symbol as shown on the left of this page. The letters
"CE" are the abbreviation of French phrase "Conformité Européene"
which literally means "European Conformity". The term initially used was
"EC Mark" and it was officially replaced by "CE Marking" in the Directive
93/68/EEC in 1993. "CE Marking" is now used in all EU official documents.
6
1. Introduction
The TWP-10 4K Video Wall Processor 2x2 is a powerful, cost effective, and truly real time
data/video processor for multiple flat panel displays or projectors. Any setups for the
display layout can be virtually possible with the control software.
The TWP-10 allows the user to input HDMI video up to 4K2K@60Hz 4:4:4. The embedded
scaler converts signals from HDMI source to match the original resolution of monitors, flat
panel displays, projectors and user-selectable output settings up to Widescreen Ultra
eXtended Graphics Array (WUXGA 1920x1200).
The TWP-10 sends the processed video through HDMI interface to the connected monitors /
projectors based on the display layout setup. The layout can be readily modified for various
applications such as digital signage, video broadcast, education and surveillance system as
well as visual effect optimization.
That’s Datavideo, sharing the value!
Features
•Four HDMI outputs with resolution from 640x480 to 1920x1200
•Supports HDMI input from 640x480 to 4K2K@60 (YUV 4:4:4), interlaced or progressive
•HDCP compliant
•Image parameters and layouts are automatically saved in flash memory of the device
and can be recalled for later use
•Several image parameters and layouts can be saved in computers and loaded for later
use
•Firmware upgradable for new features and technology enhancements
•Supports IR remote control
•Software control through USB and Ethernet
•Resize, position, zoom for each HDMI output video
•User-selectable output settings, up to 1920x1200
•Supports remote control of switching between 1x1, 2x2, 1x3 rotate, and 1x4 rotate
modes
•Supports independent input rotation at the resolution up to 1080p
•4K2K60 (YUV 4:4:4) can be divided and displayed on four 1080p60 TVs (2x2 layout only)
•Supports individual propagation delay on each display to achieve the best visual
perception
•Supported resolutions
Input Resolution
Output Resolution
720x480@30Hz
720x480@60Hz
720x576@30Hz
720x576@60Hz
1280x720@60Hz
1920x1080@30Hz
1920x1080@60Hz
4K2K@30Hz
4K2K@60Hz (4:2:0 10 bits)
4K2K@60Hz (4:2:2 10 bits)
4K2K@60Hz (4:4:4 8 bits)
640x480@60Hz
720x480@60Hz
720x576@60Hz
800x600@60Hz
1024x768@60Hz
1280x720@60Hz
1280x768@60Hz
1280x960@60Hz
1280x1024@60Hz
1366x768@60Hz
1440x900@60Hz
1680x1050@60Hz
1920x1080@60Hz
1920x1200@60Hz
1600x1200@60Hz
7
2. Connections and Controls
Front Panel
Lightly touch the power button on the front panel of the device to turn ON the TWP-10.
Rear Panel
1. Power ON/OFF Switch
Turn this power switch ON to enter the device into
STANDBY mode.
2. DC Power Jack
DC in socket connects the supplied 12V PSU. The
connection can be secured by screwing the outer
fastening ring of the DC In plug to the socket.
3. USB Virtual COM Port
Connect this port to the PC for access to the
device user interface.
4. Ethernet Control Port
Connect this port to the PC for access to the
device user interface.
5. Stereo Audio Output L/R
RCA Stereo for analogue audio output.
8
6. HDMI Input
Connect the HDMI video source to this port.
7. DIP Switch
ON (UP): Operation mode
OFF (DOWN): Firmware update mode
8. HDMI Outputs
Connect video display devices to the respective
HDMI output ports.
9
3. How to set up the TWP-10
1. Set the TWP-10 as the master device.
2. Connect an HDMI video source to the HDMI input of the TWP-10.
3. Connect all display devices to the respective HDMI outputs of the TWP-10.
4. Connect the 12V 2A DC power adapter to the TWP-10.
10
4. Software Control Program
The TWP-10 comes with a software control program which runs under Microsoft Windows
98, 2000, XP, 7, 8. Simply click the program icon after it is installed on your operating
system. However, before you start your software control program, please make sure you
have secured the connection between the PC and the TWP-10. The sections below will take
you through the system connection setup step by step.
Note: Under Microsoft Windows 7, please run as an administrator.
4.1 Start the Software Control Program
The following dialog window will pop up upon execution of the software control program.
There are basically two ways to connect the TWP-10. You can either connect via the USB
virtual COM port or the Ethernet port.
•USB: Select the appropriate virtual COM
port and click the OK button.
•Ethernet: Enter the TWP-10 device IP
address and click the OK button.
After the software control program is loaded, you will see the control interface as shown
below.
Table des matières
Autres manuels Data Video Processeur
