5
If the green "SECURE" light on your codepad is not illuminated, the screen on
your LCD codepad will display the following message:
SYSTEM NOT READY
TYPE A FOR HELP
When the message above is displayed, press the
[A]
button on the codepad and
the LCD screen will display a message similar to the one below indicating which
zones are not ready to Arm. If more than one zone is faulted, the LCD screen will
automatically scroll through all of the faulted zones showing those that are not
ready to arm. To quickly scroll through
the faulted zones, press the
[A]
button
repeatedly.
16 FAULTED
GARAGE DOOR
If you choose to isolate the zones that are faulted and arm your system without
these areas of protection, you can do so from the screen above. To isolate while
viewing the screen above, simply press the
[
button, the
zone number
(01, 02,
03, 09, 12, 16, etc.), and press the
[
button again (You can also follow the
isolate procedure described in your standard Operators Manual). Now the green
"SECURE" light should be illuminated, and the LCD screen will alternate between
the following two messages:
SYSTEM READY
TYPE CODE TO ARM
TO
05 ZONES ISOL
TYPE A FOR HELP
The top line of the message above, "05 ZONES ISOL", refers to the number
(quantity) of zones isolated, NOT the zone numbers that are isolated. Type
[A]
for
the location/description of these five isolated zones.
