Danfoss IP21/Type 1 Conversion Kit Manuel utilisateur

The instructions provide information about installing the IP21/

Type 1 conversion kit in VLT

AutomationDrive FC 360,

enclosure sizes J6 and J7.

Only Danfoss authorized, qualied personnel is allowed to

repair this equipment. The personnel must be familiar with the

instructions and safety measures described in the

VLT

AutomationDrive FC 360 Service Guide.

Items Supplied

•

IP21 top cover

•

NEMA conduit box

•

NEMA base cover

•

Screws and washers, M4x7 (8 pieces)

Description Ordering number

IP21/Type 1 Conversion Kit, J6 132B0376

IP21/Type 1 Conversion Kit, J7 132B0377

Table 1.1 Ordering Numbers

Tools Required

•

T20 screwdriver

Safety Instructions

WARNING

DISCHARGE TIME

The frequency converter contains DC-link capacitors, which

can remain charged even when the frequency converter is

not powered. High voltage can be present even when the

warning LED indicator lights are o. Failure to wait the

specied time after power has been removed before

performing service or repair work can result in death or

serious injury.

•

Stop the motor.

•

Disconnect AC mains and remote DC-link supplies,

including battery back-ups, UPS, and DC-link

connections to other frequency converters.

•

Disconnect or lock PM motor.

•

Wait for the capacitors to discharge fully. The

minimum waiting time is specied in Ta b le 1 . 2 .

•

Before performing any service or repair work, use

an appropriate voltage measuring device to make

sure that the capacitors are fully discharged.

Voltage [V] Power range [kW

(hp)]

Minimum waiting time

(minutes)

380–480 30–75 (45–100) 15

Table 1.2 Discharge Time

Installation Instructions

IP21/Type 1 Conversion Kit

Enclosure Sizes J6 & J7

VLT®AutomationDrive FC 360

Installation

1. Mount the top cover on the top of the frequency

converter.

2. Fasten with 4 screws, 2 screws on each side.

3. Tighten the screws to 1.5 Nm (13.3 in-lb).

1Topcover

Illustration 1.1 Mounting the Top Cover

4. Mount the conduit box on the bottom of the

frequency converter.

5. Fasten with 2 screws, 1 screw on each side.

6. Tighten the screws to 1.5 Nm (13.3 in-lb).

1Conduitbox

Illustration 1.2 Mounting the Conduit Box

7. Mount the conduit cover on the bottom of the

frequency converter.

8. Fasten with 2 screws, 1 screw on each side.

9. Tighten the screws to 1.5 Nm (13.3 in-lb).

1Conduitcover

Illustration 1.3 Mounting the Conduit Cover

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on

order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss

Danfoss A/S

Ulsnaes 1

DK-6300 Graasten

vlt-drives.danfoss.com

*MI06V102*

MI06V102130R0679 12/2015

Table des matières

Autres manuels Danfoss Convertisseur de média

Danfoss

Danfoss EC-LTS Series Manuel utilisateur

Danfoss

Danfoss vlt fcd 302 Manuel utilisateur

Danfoss

Danfoss VLT Micro Drive FC 51 Series Manuel utilisateur

Danfoss

Danfoss HJM022D20Q Manuel utilisateur

Danfoss

Danfoss iC7 Series Manuel utilisateur

Danfoss

Danfoss VLT Micro Drive FC 51 Series Manuel utilisateur

Danfoss

Danfoss VLT 2800 Series Manuel utilisateur

Danfoss

Danfoss VLT HVAC Drive FC 102 Manuel utilisateur

Danfoss

Danfoss Vacon NXP Instructions d'utilisation

Danfoss

Danfoss iC7 FA09-FA12 Manuel utilisateur

Danfoss

Danfoss FC 100 Series Manuel utilisateur

Danfoss

Danfoss EC-C1700B-420 Manuel utilisateur

Danfoss

Danfoss iC7 Series Manuel utilisateur

Danfoss

Danfoss iC7 Series Manuel utilisateur

Danfoss

Danfoss FCM 300 PROFIBUS Manuel utilisateur

Danfoss

Danfoss VLT AQUA Drive FC 202 Manuel utilisateur

Danfoss

Danfoss VLT 2811 Manuel utilisateur

Danfoss

Danfoss VLT HVAC Drive FC 102 Manuel utilisateur

Danfoss

Danfoss VLT 6000 Manuel utilisateur

Danfoss

Danfoss Compressor Drive CD302 Manuel utilisateur

Danfoss

Danfoss 176F4170 Manuel utilisateur

Danfoss

Danfoss VLT AutomationDrive Manuel utilisateur

Danfoss

Danfoss FC 100 Manuel utilisateur

Danfoss

Danfoss VLT AutomationDrive FC 302 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur