Dallmeier DMS 2400 MK3 Manuel utilisateur

008496 | REV 1.0.0 | 2022-01-24

COMMISSIONING

DMS 2400 (MK3)

The reproduction, distribution and utilization of this document as well as the communication

of its contents to others without express authorization is prohibited.

Oenders will be held liable for the payment of damages.

The manufacturer accepts no liability for damage to property or pecuniary damages arising due

to minor defects of the product or documentation, e.g. print or spelling errors, and for those

not caused by intention or gross negligence of the manufacturer.

Figures in this document may dier from the actual product.

Specications subject to change without notice. Errors and misprints excepted.

All trademarks identied by ® are registered trademarks of Dallmeier.

Third-party trademarks are named for information purposes only.

Dallmeier respects the intellectual property of third parties and always attempts to ensure the complete identication of third-

party trademarks and indication of the respective holder of rights.

In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective

trademark is unprotected.

This product may include software developed by the OpenSSL Project for use in the OpenSSL Toolkit (https://www.openssl.org)

and cryptographic software written by Eric Young ([email protected]).

Table of Contents

1 Validity 4

2 Documents 4

This Document 5

Other Applicable Documents

Specication

The document “Specication” contains detailed technical specications,

features and characteristics of the device.

The target audience of the document is trained system integrators.

Conguration

The document “Conguration” contains detailed descriptions on the

conguration of the device.

The target audience of the document is trained system integrators.

Operation

The document “Operation” contains instructions for using all software

functions.

The target audience of the document is operators without technical

knowledge.

Service

The “Service” document contains detailed information on how to maintain

the appliance.

The target audience of this document is trained video security system inte-

grators.

3 Typographical Conventions

The document highlights important content with special text elements:

DANGER

DANGER indicates a hazardous situation, which if not avoided, will result

in death or serious injury.

WARNING

WARNING indicates a hazardous situation, which if not avoided, could

result in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation, which if not avoided, could

result in minor or moderate injury.

NOTICE

NOTICE is used to address practices not related to physical injury.

Instructions are indicated by arrows (➡).

Bold expressions generally indicate a control element on the device (swit-

ches or labels) or on its user interface (buttons, menu items).

Paragraphs in italics provide information on basic principles,

special features and ecient procedures as well as general

recommendations.

4 Safety Instructions

Only use the device if it is technically in proper working condition and for

the intended purpose while keeping safety and potential dangers in mind.

Qualied Personnel

The installation, mounting, connection, commissioning and conguration of

the device may only be carried out by qualied personnel.

This also applies to the maintenance, testing and repair, whereby the re-

gulations of the DIN VDE 0701 series of standards (repair, modication and

inspection of electrical appliances) must be followed.

Regulations

The use of video and audio surveillance systems is, in general, strictly regu-

lated. Inform yourself about the currently valid laws and regulations regar-

ding data, worker and environmental protection before using the device and

ensure compliance with them.

System Components

Only use internal components that have been tested and approved by Dall-

meier. Inappropriate internal components may cause malfunctions, dama-

ges and data loss and may result in the loss of warranty.

Modications

Do not make any modications to the hardware or software that have not

been tested and approved by Dallmeier.

Inappropriate modications may cause malfunctions, damages and data

loss and may result in the loss of warranty.

Documentation

The product documentation contains several documents which are included

in the scope of delivery in a printed form and/or on a digital medium.

Read the documents included in the delivery carefully and thoroughly.

Always follow the contained instructions, notes and warnings and observe

the technical data in the “Specication” document.

Keep all documents in legible condition and in a suitable location for future

reference.

Regularly check the website www.dallmeier.com for the latest updates of

the product documentation.

Condensation Water

If the device is brought from a cold to a warm environment, resulting

condensation water may cause malfunctions and damages.

In this case, wait (up to 8 hours) until the device has reached room

temperature before commissioning.

Earthing & Equipotential Bonding

For the safety of persons (protection against dangerous contact voltages)

and devices (protection against over-voltages) as well as for the immunity of

information and communication technolog equipment to electromagnetic

interferences (EMI), all protective measures, which are specied by the cur-

rently valid DIN, VDE and ISO standards and which provide for a standard-

compliant earthing and a correct equipotential bonding of electrical and

electronic devices, are mandatory and must be fullled by all means.

Lightning Storms

To avoid damage to the device by electrical surge during lightning storms,

all protective measures, which are specied by the currently valid DIN, VDE

and ISO standards and which provide for a standard-compliant lightning

protection equipotential bonding, are mandatory and must be fullled by

all means.

Operating Conditions

Unfavorable operating conditions may shorten the life of the device and

may cause malfunctions, damages and data loss and may result in the loss

of warranty.

Observe the specications given in the technical data, the operating

condition requirements and the maintenance instructions.

Shocks

Shocks can cause malfunctions and damages. The unit must not be moved

during operation.

Foreign Bodies

If objects or liquids get into the device, immediately disconnect it

from the power supply (pull out the power plug).

Contact the sales partner responsible for your area.

Burnt Smell

If you notice burnt smell or a formation of smoke coming from the

device, immediately disconnect it from the power supply (pull out

the power plug).

Contact the sales partner responsible for your area.

Opening

The device may only be opened by qualied personnel for commissioning,

inspection, maintenance and repair.

Disposal

Do not dispose waste electrical and electronic equipment into the

household trash. Disconnect the device from the power supply. Remove all

connected devices. Return the device to your respective sales partner.

5 General Notes

Scope of Delivery

Included in the standard scope of delivery is:

• 1× DMS 2400 (MK3) appliance

• 1× Power cord (IEC 60320 C-13 connector to European plug)

• 1× Weidmüller plug-in connector B2L 3.50

• 1× Corded optical mouse

• 1× Replacement dust lter set

• 1× 006883 DP to HDMI-female

The scope of delivery may dier depending on the ordered equipment,

device variant or country of destination.

The functional range of the device depends on the ordered equipment

or device variant and may dier from this document’s content. Cer-

tain functions and features may require the purchase of an additional

license.

Transportation and Packaging

Store the original packaging for later transportation.

Dallmeier is not responsible for any damage resulting from unprofessional/

improper transportation.

The device should only be shipped in the original packaging.

If the original packaging is no longer available, ensure that the used

packaging suciently protects the device against damage, moisture,

heat and cold.

Table des matières

Autres manuels dallmeier Instrument de mesure

dallmeier

dallmeier SMatrix DMX2400 Mode d’emploi

dallmeier

dallmeier VideoNetBox III Mode d’emploi

dallmeier

dallmeier DMS 160 Bank Mode d’emploi

dallmeier

dallmeier DLS 4 Manuel utilisateur

dallmeier

dallmeier DLS 4 Instructions d'utilisation et d'entretien

dallmeier

dallmeier SMatrix DMX2400 Instructions de montage

dallmeier

dallmeier DMX 800 Smartix Guide rapide

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

dallmeier DMS 2400 MK3 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques