Daitsu CADR-160 Manuel utilisateur

USER MANUAL

PURIFIER DAITSU

NATURE

Edition

11/21

Models

CADR-160

UM En

Performance

Product Name Air Purier

Rated Voltage 220V-240V~

Rated Frequency 50Hz/60Hz

Product Usage Removes pollutants such as particulate matter, gas

pollutants and microorganisms in the air.

Method of Cleaning 1. Washable pre-lter

2. Composite carbon cloth lter (HEPA+Activated carbon)

Rated Power 50W

Particulates CADR 159m3/h

Particulates CCM P1

Energy Efciency Index Qualied (Particulates)

Noise 57dB(A)

Applicable area 14-24 m2

Product size 325x172x515mm

Weight 5,7kg

Product Structure

Operation panel

Buckle

Air outlet

Handle

Sensor

Air Quality Indicator

Air quality indication lamp Power Sleep Mode Filter Reminder

Speed Child Lock

Installation

♦ Install lter

First, remove the lter from the plastic bag.

1. Remove the air inlet.

2. Remove the lter.

3. Remove the lter from the plastic bag.

Note: Make sure to remove the plastic

bag from the lter before use.

Press the “PUSH” on both sides of the front

cover and open the front cover.

Note: There are internal and external points, the one with the pull tab facing out; be sure to

install the front panel before use.

Filter care and maintenance

1. Pre-lter (about half a month).

Use a vacuum cleaner to remove dust from the surface of the lter, or

wash it with water and dry it thoroughly.

2. HEPA+ activated carbon composite lter (about once every two months).

When the 1500 hour lter replacement prompt ashes, press and

hold the reset button to clear the lter indicator light and reset the timing

function.

• Place the lter in a ventilated place so that the harmful gases and bacteria on the surface

of the lter can be volatilized. Do not expose it to excessive sunlight.

• Do not wash the lter with water.

Tips

• Unplug the power plug before cleaning and maintenance.

• Do not operate with the lter removed (no dust removal effect, and the dust that is

inhaled may cause equipment failure).

• Unplug the power cord when it is idle for a long time (it will also consume power in the

standby state).

• Depending on the place of use and the method of use (for example, households with a

large number of smokers or areas with severe air pollution), the lter replacement cycle

may be shortened. If the ltration effect is not obvious, replace the lter in time.

When replacing the lter, please turn off the power rst.

How to use

1. After plugging in the power, you will hear a sound “Di”, the machine enters standby

mode, and the power indicator will shows red color.

2. Boot

After the power is turned on, the air quality indicator light is completely white,

the machine enters the automatic mode.

3. Timer

The machine’s working time can be set by the timer button while the machine

is running. Set the time to 1 hour, 2 hours, 4 hours, 8 hours, press again to turn

off, the selected time is displayed on the screen.

4. Speed

Press the wind speed button to change the speed of the motor. It is divided into

AUTO, rst gear, second gear, third gear, sleep. When pressed, the machine

increases one gear from the current gear position, and then returns to the

automatic mode les.

In AUTO mode, PM2.5 corresponds to the corresponding table of air quality

and gear position in the intelligent mode of speed:

1~100 = green light = excellent air quality = rst gear.

101~200 = yellow light = good air quality = second gear.

201~500 = red light = poor air quality = third gear.

5. Child Lock

When the child lock button is pressed, the button function of the machine enters

the locked state, and all the buttons cannot be operated. Long Press this button

for 3 seconds to unlock.

6. Reset

This unit is equipped with a timing change lter function, which will ash until

the 1500 hour lter replacement prompt. Press and hold the reset button for

5 seconds to clear the lter indicator and reset the timing function.

7. Power off

When the power is on, touch the “Power” button on the operation, and the

machine enters the standby state. (The icon light is on when the machine

enters the standby state.)

Precautions

♦Installation instructions

1. Do not place in the following places:

• Direct sunlight or facing the air outlet and heated places (may

cause deformation, Deterioration, discoloration, and failure).

• Equipment accessories such as TVs and radios (which may

cause image distortion and noise). Please place it at a distance

of 1m or more. At the same time, if the same socket is used with

these devices, image plugging and noise may occur when the

power plug is inserted.

When this happens, plug the power cord into a different outlet.

2. For indoor dust such as pollen, the product should be placed

on the ground. Since pollen, dust, etc. are likely to fall near the

oor, it is recommended to place the product on a at oor in the

room.

3. In order to effectively circulate the air in the room.

In order not to block the air inlet and outlet, place the product

about 30cm or more from the left and right sides of the wall,

furniture, curtains, etc. In order to use this product more

effectively, please keep the back of the product at least 20cm

away from the wall.

4. Do not place objects on the main unit (otherwise it may cause

the machine to malfunction). Special Note: Do not place magnets

and metal objects.

5. Do not block the air inlet and outlet, for example, do not place

objects on the air outlet. Or in front of the air inlet.

Sun

30cm

20cm

goods

outlet

inlet

Warning

Prohibited

1. The machine is prohibited from moving or shaking while it is running.

Do not pull on the power cord while moving or storing it. Pulling the

power cord may cause a short circuit or damage to the inside of the

power cord, resulting in re or electric shock.

2. Do not damage the power cord or plug, and do not cut, excessively

twist, pull, or twist the power cord. If the power cord is damaged,

it must be replaced by the manufacturer, service department or

professional to avoid danger. Non-professionals are prohibited from

disassembling the machine to avoid the risk of electric shock.

3. The plug and hand should not be exposed to water before plugging

in the power plug, otherwise there is a danger of electric shock.

4. Do not use power supplies, universal sockets or connected devices

that exceed the rated value.220V ~ 5A AC power. Using a universal

outlet that exceeds the rated value or power supply may cause the

power cord to overheat and cause a re.

5. Do not touch the power plug with wet hands, which may result in

electric shock.

6. Do not put your ngers or metal objects into the gap of the air outlet,

otherwise it may cause electric shock or injury. Do not allow water,

ammable detergents or other liquids to enter the product to avoid

electric shock or re.

7. This product is not a substitute for normal ventilation equipment,

daily vacuum cleaners and range hoods used in the kitchen.

8. Do not use this product in gas appliances, heating devices or stove

accessories.

9. Do not use this product in a wet or hot environment such as a

bathroom, toilet or kitchen.

10. Never place products in such locations.

• Unstable locations (otherwise the product may fall or fall over,

resulting in injury, electric leakage, electric shock or re).

• Locations that are hot, humid, or wet, such as bathrooms (air puriers

may cause electric shock or re due to electric leakage) a place

where the kitchen emits soot.

11. Do not use air puriers in indoors with incense-based insecticides.

• Chemical residues may accumulate in the machine and then be

released from the air outlet to endanger your health.

• After using the insecticide, allow the room to be thoroughly ventilated

before using the air purier.

220V~

12. It is not recommended to use an air purier when burning incense or

mosquito coils, otherwise the lter of the air purier will leave an odor.

Mandatory matters

1. Turn off the power of the machine immediately when any of the following

conditions occur (may cause electric shock, sparks or smoke).

• There is abnormal sound or vibration during operation.

• The product is abnormally hot and has a burnt odor.

2. Please clean the power plug regularly.

• If the power plug is dusty, moisture may damage the insulated part of the plug, resulting

in a re.

• If the appliance is not used for a long time, please unplug the power cord.

3. Be sure to disconnect the power before performing maintenance on the

appliance.

• The product may suddenly start, causing electric shock and injury.

4. Plug the plug securely into the power outlet (if the plug is not securely inserted, it

may cause electric shock due to overheating or even cause a re).

• Do not use a damaged plug or a loose power outlet.

5. Please pull the power plug from the insulated part of the hand-held plug.

• Pull the power cord to pull off the power plug, which may cause damage to the power

cord, electric shock, short circuit, or re.

6. When any of the following conditions occur, please turn off the

power of the machine immediately and look for the maintenance

department.

• The switch does not work.

• The power cord or plug is abnormally hot.

• I noticed an abnormal sound or vibration.

• There are any other abnormalities or malfunctions.

7. Non-professionals are prohibited from disassembling the machine to avoid the

risk of electric shock.

For IEC: This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the appliance

by a person responsible for their safety. Children should be supervised to ensure that they

do not play with the appliance. If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualied persons in order to avoid a hazard.

For EN: This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and knowledge

if they have been given supervision or instruction concerning use of the appliance in a

safe way and understand the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without supervision.

Troubleshooting

♦Common fault phenomenon, fault code description and

troubleshooting

Fault phenomenon Inspection / solution

Can’t turn on or press button no

response.

1. Is the power cord plug plugged in?

→ Plug in the power cord.

2. Is the front cover of the purier covered?

→ Cover the front cover of the purier.

Button no response.

1. Is the lter dirty?

→ Clean the lter.

2. Is the lter not replaced for a long time?

→ Replace the lter with a new one.

The smell of the air outlet makes

people feel uncomfortable.

1. Is the plastic bag on the lter screen removed

by the purier?

→ Remove the plastic bag from. The lter before

using it for the rst time.

2. Is the order of the purier lter incorrectly

installed?

→ Please refer to the instructions for the

installation sequence and precautions.

The purier runs for a long

time but the air quality is not

signicantly improved.

The lter alarm light is on: it indicates that the lter

timing change timer has reached the set value.

At this time, after changing the lter screen, press

and hold the sleep to reset.

Packing details

Body 1pc

Main lter 1set

Primary lter 1pc

Product Manual 1pc

Move control 1pc

Table des matières

Autres manuels Daitsu Purificateur d'air

Daitsu

Daitsu APU-DA30 Manuel utilisateur

Manuels Purificateur d'air populaires d'autres marques

IKEA

IKEA UPPÅTVIND Manuel utilisateur

Nash

Nash AP-1 PureSmart Manuel utilisateur

LG PH-U450 Series Manuel utilisateur

DeLonghi

DeLonghi DDSX 220WFA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuel utilisateur

Sharp

Sharp FU-40SE Manuel utilisateur

Philips

Philips AC2721 Manuel utilisateur

Hitachi

Hitachi EP-A3000 Manuel utilisateur

TruSens

TruSens Z-2000 Manuel utilisateur

Motorola

Motorola MBP87SN Manuel utilisateur

Beko

Beko ATP 7100I Manuel utilisateur

Carrier

Carrier INFINITY 1620 Manuel utilisateur

AtmosAir

AtmosAir P2002 Manuel utilisateur

Winix

Winix NK300 Manuel utilisateur

Friedrich

Friedrich C-90A Instructions d'utilisation et d'installation

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuel utilisateur

Base aire

Base aire 555 Pro Manuel utilisateur

Champion

Champion CP25 Manuel utilisateur