Dahua ASI7223X-A-T1 Manuel utilisateur
Face Recognition Terminal
Quick Start Guide
V1.0.0
Foreword I
Foreword
General
This manual introduces the installation and basic operation of the Face Recognition Terminal
(hereinafter referred to as "terminal").
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words
Meaning
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, lower performance, or unpredictable
result.
NOTE
Provides additional information as the emphasis and supplement to
the text.
Revision History
Version
Revision Content
Release Date
V1.0.0
First release
August 2019
About the Manual
The manual is for reference only. If there is inconsistency between the manual and the
actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the manual.
The manual would be updated according to the latest laws and regulations of related
regions. For detailed information, see the paper manual, CD-ROM, QR code or our official
website. If there is inconsistency between paper manual and the electronic version, the
electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, please refer to our final explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurred when using the device.
If there is any uncertainty or controversy, please refer to our final explanation.
Important Safeguards and Warnings II
Important Safeguards and Warnings
This chapter describes the contents covering proper handling of the terminal, hazard
prevention, and prevention of property damage. Read these contents carefully before using the
terminal, comply with them when using, and keep it well for future reference.
Operation Requirement
Do not place or install the terminal in a place exposed to sunlight or near the heat source.
Keep the terminal away from dampness, dust or soot.
Keep the terminal installed horizontally on the stable place to prevent it from falling.
Do not drop or splash liquid onto the terminal, and make sure there is no object filled with
liquid on the terminal to prevent liquid from flowing into the terminal.
Install the terminal in a well-ventilated place, and do not block the ventilation of the
terminal.
Operate the terminal within the rated range of power input and output.
Do not dissemble the terminal.
Transport, use and store the terminal under the allowed humidity and temperature
conditions.
Electrical Safety
Improper battery use might result in fire, explosion, or inflammation.
When replacing battery, make sure the same model is used.
Use the recommended power cables in the region and conform to the rated power
specification.
Use the power adapter provided with the terminal; otherwise, it might result in people injury
and device damage.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Please note that the power supply requirement is
subject to the device label.
Connect the device (I-type structure) to the power socket with protective earthing.
The appliance coupler is a disconnection device. When using the coupler, keep the angle
for easy operation.
Table of Contents III
Table of Contents
Foreword.................................................................................................................................................... I
Important Safeguards and Warnings..................................................................................................... II
1 Dimensions and Components........................................................................................................... 1
2 Installation.............................................................................................................................................. 2
Installation Notes........................................................................................................................... 22.1 Installation Drawings..................................................................................................................... 32.2 Cable Connections........................................................................................................................ 32.3 Installation..................................................................................................................................... 52.4
3 System Operation.................................................................................................................................. 6
Initialization ................................................................................................................................... 63.1 Adding New Users ........................................................................................................................ 63.2
4 Web Operation....................................................................................................................................... 9
Notes of Face Recording.................................................................................................. 10Appendix 1 Cybersecurity Recommendations................................................................................... 13Appendix 2
Dimensions and Components 1
1 Dimensions and Components
Dimensions and components (mm [inch])Figure 1-1
Table 1-1 Component description
No.
Name
1
Dual camera
2
IR light
3
Phototransistor
4
White fill light
5
Display
6
MIC
Installation 2
2 Installation
Installation Notes2.1
If there is light source 0.5 meters away from the device, the minimum illumination should
be no less than 100Lux.
It is recommended that the device is installed indoors, at least 3 meters away from
windows and doors and 2 meters away from lights.
Avoid back light and direct sunlight.
Ambient Illumination Requirement
Ambient illumination requirementFigure 2-1
Places Recommended
Places recommendedFigure 2-2
Places Not Recommended
Installation 3
Places not recommendedFigure 2-3
Installation Drawings2.2
Installation drawings (mm[inch])Figure 2-4
Cable Connections2.3
Check if the access control security module is enabled in Function > Security Module. If
the security module is enabled, you need to purchase access control security module
separately. The security module needs separate power supply to provide power.
Once the security module is enabled, the exit button, turnstile control, and firefighting
linkage will be invalid.
Installation 4
Cable connectionFigure 2-5
Table 2-1 Component description
No.
Name
1
USB port
2
Power port
3
Ethernet port
Installation 5
Installation2.4
Installed on the gate machineFigure 2-6
Table 2-2 Component description
No.
Name
1
Ornamental cover
2
M5 screw
3
Waterproof silica gel plug
4
Terminal
5
Cable
Installation Procedure
Thread cable through the turnstile.Step 1 Put the waterproof silica gel plug on the cable.Step 2 Fix the terminal onto the turnstile with M5 screw.Step 3 Connect cables for terminal. See "2.3 Cable Connections."
Apply sealant to gaps between the waterproof silica gel plug and turnstile.Step 4 Install the ornamental cover on the base of the terminal.Step 5 The installation is competed.
System Operation 6
3 System Operation
Initialization3.1
Administrator password and an email should be set the first time the terminal is turned on;
otherwise the terminal cannot be used. See Figure 3-1.
InitializationFigure 3-1
The administrator password can be reset through the email address you entered if the
administrator forgets the administrator password.
The password should consist of 8 to 32 non-blank characters and contain at least two
types of characters among upper case, lower case, number, and special character
(excluding ' " ; : &).
For terminal without touch screen, initialization can be completed through the web. See the
user manual for details.
Adding New Users3.2
You can add new users by entering their user IDs, names, importing face images, passwords,
selecting their user levels, and more.
Select User > New User.Step 1 The New User interface is displayed. See Figure 3-2.
The following figure is for reference only and the actual interface shall prevail.
Table des matières
Autres manuels Dahua Contrôleurs d'accès IP
Dahua
Dahua DHI-ASR1101M Manuel utilisateur
Dahua
Dahua DHI-ASI7213X-T Manuel utilisateur
Dahua
Dahua ASA1222E Manuel utilisateur
Dahua
Dahua Access Standalone Manuel utilisateur
Dahua
Dahua DHI-ASA2212A Manuel utilisateur
Dahua
Dahua DHI-IPMECS-2201C Manuel utilisateur
Dahua
Dahua ASI6213J-FT Manuel utilisateur
Dahua
Dahua DHI-ASI7213X-V1-T1 Manuel utilisateur
Dahua
Dahua ASR2101H-D Manuel utilisateur
Dahua
Dahua ASC3202B Manuel utilisateur
Dahua
Dahua DHI-ASI7213Y-V3-T1P Manuel utilisateur
Dahua
Dahua ASC2102B-T Manuel utilisateur
Dahua
Dahua ASA4214F Manuel utilisateur
Dahua
Dahua DEE1010B-S2 Manuel utilisateur
Dahua
Dahua ASI7214X Manuel utilisateur
Dahua
Dahua ASR1102A Manuel utilisateur
Dahua
Dahua ASC2102B-T Manuel utilisateur
Dahua
Dahua ASA2212A Manuel utilisateur
Dahua
Dahua ASC1208C-S Manuel utilisateur
Dahua
Dahua VTO2101E-P Manuel utilisateur
