Daewoo DWM-800C Manuel utilisateur

Service Manual

Washing Machine

Model :

DWM-800C(P)

DWM-900C(P)

DAEWOO ELECTRONICS CO., LTD.

UTO W SHER UTO W SHER UTO W SHER UTO W SHER UTO W SHER UTO W SHER UTO W SHER UTO W SHER UTO W SHER UTO

WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER

AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO

WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER

AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO

WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER

AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO

WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER

WASHING MACHINE

CCoonntteennttss

1. SPECIFICATIONS..................................................................................................... 1

2. EXTERNAL VIEW..................................................................................................... 2

3. PRINCIPLES OF OPERATION AND EXPLANATION OF FUNCTIONS................ 3

4. DIRECTION FOR DISASSEMBLY AND ASSEMBLY..............................................7

5. TROUBLESHOOTING GUIDE ................................................................................10

6. EXPLODED VIEW AND PARTS LIST.....................................................................15

7. WIRING DIAGRAM..................................................................................................23

NO. ITEM SPECIFICATIONS

1 POWER VOLTAGE

SOURCE FREQUENCY 60Hz 50Hz

2 POWER 800C 480W NON PUMP/515W PUMP

CONSUMPTION

900C 630W 560W

3 DIMENSION 800C Net with legs: 830X475X950, Packed without legs : 870X533X947 (WXDXH,mm)

900C Net with legs: 830X475X970, Packed without legs : 870X533X947 (WXDXH,mm)

4 MACHINE 800C Non pump (Net:24kg Packed up:27kg), Pump (Net:25kg Packed up:28kg)

WEIGHT 900C Non pump (Net:25kg Packed up:28kg), Pump (Net:26kg Packed up:29kg)

5 WASHING COURSE STRONG, NORMAL

6 WATER LEVEL 900C-EXTRA HIGH:70l, HIGH:60l, MEDIUM:52l, LOW:44l

7 REVOLUTION WASH 800C-170 rpm / 900C-190 rpm 800C-170 rpm / 900C-190 rpm

PER MINUTE SPIN 1700 rpm 1400 rpm

8 TIMER WASH MAX. 15 min., Manual operation

SPIN MAX. 5 min., Manual operation

9 WASHER TYPE PULSATOR TYPE

10 SPIN TYPE CENTRIFUGALLY SEPARATED TYPE

MAXIMUM MASS

WASH 800C-6.0 kg / 900C-7.0 kg

OF TEXTILE SPIN 5.5 kg

12 WATER SUPPLY MANUAL

13 SPIN RINSE O

14 OUTLET OF DRAIN HOSE REAR

15 LINT FILTER O

POWER SOURCE SUFFIX EXPLANATION

NON PUMP PUMP

AC 100V 50/60Hz J -

AC 110V 60Hz T TP

AC120V 60Hz A AP

AC 220V 50Hz N NP

AC 220V 60Hz L LP

AC 240V 50Hz M MP

AC 110/220V 50Hz D DP

AC 120/240V 60Hz S SP

1. SPECIFICATIONS

SPECIFICATIONS

NOTE : Explanation table for suffix of names.

AC 110/220V AC 220V AC 240VAC 110V AC 120V AC 220V

AC 127/220V

Model Name Pump

DWM-XXXX N or NP

Power Source

2. EXTERNAL VIEW

STRUCTURE

Structure Of The Wash Machine

Control Panel (Panel b Ass y)

11INLET WATER

Connect inlet hose to supply water in the WASH

TUB or BASKET SPIN.

22LEVER WATER SUPPLY SELECTOR

Left : water supply in the WASH TUB.

Right : water supply in the BASKET SPIN.

33WASH TIMER

Use to select the desired time for washing or rins-

ing.

44WASH ACTION

Use to select wash action. (STRONG”, “NORMAL”)

55VALVE SELECTOR

Select “WASH.RINSE” for washing and rinsing, and

“DRAIN” to drain the water.

(In case PUMP MODEL turn on the drain pump)

“OFF” to turn off the drain pump. (Only PUMP

MODEL)

66SPIN TIMER

Used to select the desired time for spinning.

Wash Spin Wash Timer

Wash Action

Strong

Normal

Spin Timer

Off

Wash-Rinse

Valve Selector

Drain

WATER DRAIN HOSE

(PUMP MODEL)

PULSATOR

BASE UNDER

OVERFLOW FILTER

SPIN DRYER LID

Whenyouopenthislidwhilethespinbasketisspinning,

thespinningwillbestoppedbybrakesystem.

LINT FILTER

Thisisusedforgatheringthe

dregswhicharemadeduring

washing.

WASH TUB LID

Duringoperation,closethe

washtublid.

POWER CORD

Theplug’sshapemaynotcorrespondwiththisdrawing.

“WARNING-THIS APPLIANCE

MUST BE EARTHED”

SAFETY COVER

INNER LID

SPIN DRYER BASKET.

WATER DRAIN HOSE

(NON-PUMP MODEL)

GUIDE

CASCADE

456

FUNCTION

The main switch remains ON during the washing time set by turning the timer knob.

At the same time, the internal switch T1 and T2 which provide power to WASH MOTOR alternately at assigned Intervals.

Select switch knob sets the wash type by means of controlling the interval of internal switch contact.

STRUCTURE AND PRINCIPLE OF ACTIVATION

3. PRINCIPLES OF OPERATION AND EXPLANATION OF FUNCTIONS

WASH TIMER

Wash Timer

CIRCUIT DIAGRAM

SPIN TIMER

FUNCTION

The spin timer is the switch providing power to the SPIN MOTOR(DRAIN PUMP MOTOR) during the set spin dry

time, and is a spring-type time switch comes on upon turning and those contact points comes off after the set time.

STRUCTURE AND PRINCIPLE OF ACTIVATION

1) The main shaft turns due to the unwinding force when the spin timer is turned, the spring wound with that force

being delivered through each gear and the spring slowly unwinding at a speed finally controlled by the angle

assembly.

2) The contact point Turns ON and the assembly angle is set in motion which is in the CAM groove in the OFF

state, comes off the groove when the main shaft is turned to wind the spring. The contact point turns OFF,

return to CAM groove when the spring unwind completely.

SAFETY DEVICE FOR BASKET SPIN

The BASKET SPIN is an apparatus which eliminates the water from the laundry through centrifugal separation

generated by rapid revolution(approximately 1,600rpm for 60Hz). Accordingly, there are a DOOR SWITCH to cut

off the power going into the DOOR SPIN is opened and a brake system to stop the rotating BASKET SPIN.

DOOR SWITCH

When the DOOR SPIN is opened during spinning, the DOOR

SWITCH LEVER which sites atop the DOOR SPIN falls off the

contact, and cuts off the power going into the SPIN MOTOR.

Spin Timer

BRAKE SYSTEM

When the DOOR SPIN is opened, LINK WIRE which connect

to DOOR SPIN loosens. And then the BRAKE BAND touches

the DRUM COUPLING assemply and stops the SPIN DRYER

as it is pulled by the SPRING in the BRAKE FIX PLATE

assembly.

BRAKE BAND GAP CONTROL METHOD

The BAND BRAKE works best when the gap between it and

the DRUM COUPLING is about 2mm when the DOOR SPIN

is closed. The SPIN DRYER stops slowly if the gap between

the two is too narrow, the SPIN DRYER revolution is affected

and the PLATE CONTROL WIRE may be adjusted to main-

tain the BRAKE BAND gap adequately.

WASH DECELERATOR ASSEMBLY

The initial deceleration following the activation of the WASH MOTOR takes place through the PULLEY MOTOR

and PULLEY PULSATOR, and the secondary deceleration is done by the gear in the GEAR HOUSING which also

increeases their revolution strength. This revolution speed and strength is delivered to the PULSATOR, which is

then able to cause water current that is strong yet soft so that wash loads are not damaged.

PLATE

CO NTROL WIRE

BASE

SKET SPI N

WASH MOTOR

MOTOR WASH

About 1,700rpm(60Hz)

1,400rpm(50Hz)

M-Pully 2.5:1 (50Hz)

3.0:1 (60Hz)

PULLEY PULSATOR

About 560rpm(50/60Hz)

PULSATOR

About 170rpm(50/60Hz)

G/H (3.3:1)

GEAR HOUSING

GEAR HOUSING ASS’Y

The GRAR HOUSING ASSEMBLY is a transmission device which turns the PULSATOR at 3.3:1 lowered speed

through the gear unit assembly which receives power at the GEAR SHAFT UNIT.

1) The two sides of the GEAR SHAFT UNIT are supported by the

OILLESS BEARING in the GEAR HOUSING ASSEMBLY.

2) The GEAR UNIT ASSEMBLY is connected to the GEAR

SHAFT 1 and GEAR SHAFT UNIT by the GEAR and GEAR

UNIT respectively.

3) The two sides of GEAR SHAFT 1 are supported by the OIL

SEAL and OILLESS BEARING in the GEAR HOUSING

ASSEMBLY.

SPIN GELLOWS ASS’Y

The wrinkled rubber device on the botton of the BASKET SPIN is

called SPIN BELLOWS ASSEMBLY.

It has a waterseal and a oilless metal inside to prevent leakage

and so that the BASKET SPIN may work smoothly.

Much lint may be obtained depending upon the kind of clothes to

be washed and same of the lint may also be suck to the clothes.

To minimize this possibility, a lint filter is provied on the upper part

of the FILTER OVERFLOW to filter the wash water.

Use of the lint filter during every wash is recommend.

CLEANING THE LINT FILTER

1) Remove the FILTER AS from the FILTER OVERFLOW by pressing it downwards.

2) Turn the FILTER AS inside out, and wash the lint off with water.

3) Return the FILTER AS it was, and fix the FILTER AS to the FILTER OVERFLOW.

STRUCTURE

Filter

4. DIRECTION FOR DISASSEMBLY AND ASSEMBLY

DISASSEMBLY

1. Remove 3 screws on the panel

3. Remove control lever and timer.

2. Remove knob and 2 screws on the bracket panel.

Replacing Wash Timer And Spin Timer

1. Remove 2 screws on the cover B. 2. Sepeate link brake from the brak wire assembly.

Replacing Motor For Spin And Wash

DISASSEMBLY

3. Remove bolt and nut on the upper side of the drum

coupling as and lift up the basket spin.

5. Remove a belt connecting motor pulley and pulsator

pulley.

7. Remove cap screw(2EA) and 5 screws on flange

of the tub. And lift up the tub assembly.

9. Remove 3 screws and spin motor.

4. Remove 1 screw fixing the drain pump.

(pump model)

6. Separae harness as connefctors.

8. Remove 3 screw on the base and Remove wash

motor.

Autres manuels pour DWM-800C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Daewoo Rondelle

Daewoo

Daewoo DWD-FD1411 Manuel utilisateur

Daewoo

Daewoo DWF-240HSW Manuel utilisateur

Daewoo

Daewoo DWF-753 Manuel utilisateur

Daewoo

Daewoo WM712T1WU4RS Manuel utilisateur

Daewoo

Daewoo DWD-FD1451 Manuel utilisateur

Daewoo

Daewoo DWF-312W Manuel utilisateur

Daewoo

Daewoo DWF-150LD Manuel utilisateur

Daewoo

Daewoo DWD-NT121'S Manuel utilisateur

Daewoo

Daewoo D-CV701PC Series Manuel utilisateur

Daewoo

Daewoo DWD-M1041 Manuel utilisateur

Daewoo

Daewoo mini Manuel utilisateur

Daewoo

Daewoo DWF-750M Manuel utilisateur

Daewoo

Daewoo DWF-171M Manuel utilisateur

Daewoo

Daewoo DW-3610 Manuel utilisateur

Daewoo

Daewoo DWD-G1081S Manuel utilisateur

Daewoo

Daewoo Washing Machine Manuel utilisateur

Daewoo

Daewoo DWC-UD121X Series Manuel utilisateur

Daewoo

Daewoo DWF-260NSTC Manuel utilisateur

Daewoo

Daewoo DWF-200M(V) Manuel utilisateur

Daewoo

Daewoo DWD-FV2021-4 Manuel utilisateur

Daewoo

Daewoo DWD-L1021 Manuel utilisateur

Daewoo

Daewoo DWF-260C Manuel utilisateur

Daewoo

Daewoo DWD-1211RT Manuel utilisateur

Daewoo

Daewoo DWD-F1011 Manuel utilisateur

Manuels Rondelle populaires d'autres marques

Tricity Bendix

Tricity Bendix AW 1000 W Guide produit

Panasonic

Panasonic NA-F60L5WRB Manuel utilisateur

GE WSLP1500 Manuel

Electrolux

Electrolux EWF1284EDW Manuel utilisateur

Bosch

Bosch WAN2829BSN Manuel utilisateur

LG TV2516DV3B Manuel utilisateur

LG TH2517DSAV Manuel utilisateur

VESTEL

VESTEL CMH-XL 7510 TE Manuel utilisateur

AEG

AEG 74335 Manuel d'utilisation

Johnson

Johnson JWF721A Manuel utilisateur

Beko

Beko WTE7604XLW0 Manuel utilisateur

Danby

Danby DTT100A1WDB Instructions de montage

Amica

Amica WA 14 Ex Manuel utilisateur

Bosch

Bosch WAS28461AU Manuel utilisateur

Miele

Miele PW 6080 Vario Manuel utilisateur

Finlux

Finlux FLX108CF220 Manuel utilisateur

Whirlpool

Whirlpool 3LBR5132AN0 Manuel utilisateur

Beko

Beko WKB 51231 PTMA Manuel utilisateur