Da-Lite DESIGNER MANUAL SCREEN Manuel utilisateur

76488 Rev. 7/02Printed in U.S.A.

MAINTENANCE

PROJECTION SCREEN MAINTENANCE

Protect your screen by keeping it rolled in its

case when not in use. Always examine both

front and back of surface before rerolling into

case to make certain screen is free of dust, dirt

or other foreign matter. Use a very soft duster

brush to gently remove foreign particles.

CASE MAINTENANCE

The case of the screen has a Resistovar finish.

This finish is resistant against: water, alcohol,

marring, scratching, and nail polish remover. To

help maintain the best appearance of the case

it is recommended that the case be polished

with any reputable liquid or paste wax polish.

An oil type polish is not recommended because

it allows for the collection of dust and finger

prints. When necessary, this finish may be

wiped with a damp soft cloth using a mild soap

solution, rinsed with clear water and dried with

a soft cloth.

POWER

PRESENTATION PRODUCTS

The

Operating Instructions

For

Designer

Manual Screen

DA-LITE SCREEN COMPANY, INC.

3100 North Detroit Street

Post Office Box 137

Warsaw, Indiana 46581-0137

Phone: 574/267-8101

800-622-3737

Fax: 574/267-7804

http:// www.da-lite.com

e-mail: [email protected]

FOR WALL MOUNTING

HARDWARE PROVIDED

2 – “V” Bars ( one is factory mounted to the

back of the case; one will be mounted to

the wall)

6 – Toggle Bolts, 4"

6 – Lead Shields, #10-14 x 11/2"

6 – Phillips Flat Head Wood Screws, #10 x 2"

TOOLS REQUIRED

Electric Drill

Masonry Bit 5/16" (if mounting in solid masonry

or concrete)

Screw Driver, #2 Flat Tip (if using toggle bolts)

or #2 Phillips (if mounting in solid masonry or

concrete)

INSTALLATION INSTRUCTIONS

Determine the height of the top of the case

from the floor. This will be the height of the

wall mounted “V” bar.

Hold the loose “V” bar to the wall at the height

determined above (MAKE SURE IT IS LEVEL),

and mark the location for the screw holes. To

mount the “V” bar on solid concrete or

masonry wall, drill 5/16" holes and insert the lead

shields. Fasten the “V” bar to the wall using

the #10 x 2" wood screws. If you are mounting

to a hollow wall, drill 1/2" holes and insert the

toggle bolts. Then fasten the “V” bar to the

wall with the toggle bolts. Now set the case in

place on the wall with the “V” bar of the case

nestled into the “V” bar on the wall.

FOR CEILING SUSPENSION

Position and properly anchor screw hooks into

ceiling, beam or other solid surface. Then

proceed to use the two “D” rings that are

factory mounted to the top of the case to hang

the case securely.

TO LOWER AND RAISE PICTURE SURFACE

To lower the picture surface, pull the screen

down all the way. Then hesitate and allow the

screen to retract very slowly until it locks in

place. To raise the picture surface pull down on

the pull bail, then raise quickly, as a window

shade. Keep control of the picture surface. Do

not allow it to roll uncontrolled into the case or

damage to the screen is sure to result.

Allow a minimum of

11/4" from the ceiling

Ceiling

41/4"

Determine

measurement to the

top of the Case

Wall

“V” Bar mounted

to the back of the

Case at the factory

“V” Bar mounted

to the wall

Mount top of

“V” Bar flush

with top of Case

Floor line

Autres manuels Da-Lite Écran de projection

Da-Lite

Da-Lite ADVANTAGE ELECTROL Manuel utilisateur

Da-Lite

Da-Lite IDEA Panoramic Manuel utilisateur

Da-Lite

Da-Lite ADVANTAGE DELUXE ELECTROL Manuel utilisateur

Da-Lite

Da-Lite Deluxe Insta-theater Manuel utilisateur

Da-Lite

Da-Lite Cosmopolitan Electrol Manuel utilisateur

Da-Lite

Da-Lite Theater-Lite Manuel utilisateur

Da-Lite

Da-Lite Tensioned Conference Electrol Manuel utilisateur

Da-Lite

Da-Lite C with CSR Manuel utilisateur

Da-Lite

Da-Lite IDEA Screen Manuel utilisateur

Da-Lite

Da-Lite Wireline Advantage Manuel utilisateur

Da-Lite

Da-Lite DESIGNER ELECTROL Manuel utilisateur

Da-Lite

Da-Lite FullVision Manuel utilisateur

Da-Lite

Da-Lite Tensioned Advantage Deluxe Electrol Manuel utilisateur

Da-Lite

Da-Lite EXECUTIVE ELECTROL Manuel utilisateur

Da-Lite

Da-Lite Designer Contour Manual Manuel utilisateur

Da-Lite

Da-Lite ADVANTAGE ELECTROL Manuel utilisateur

Da-Lite

Da-Lite DESIGNER CONTOUR MANUAL Manuel utilisateur

Da-Lite

Da-Lite Large advantage electrol Manuel utilisateur

Da-Lite

Da-Lite Polacoat Da-Plex Semi-Rigid Manuel utilisateur

Da-Lite

Da-Lite ADVANTAGE ELECTROL Manuel utilisateur

Da-Lite

Da-Lite senIor electrol Manuel utilisateur

Da-Lite

Da-Lite Presenter P-50 Manuel utilisateur

Da-Lite

Da-Lite ADVANTAGE DELUXE ELECTROL Manuel utilisateur

Da-Lite

Da-Lite DUAL MASKING ELECTROL Manuel utilisateur

Manuels Écran de projection populaires d'autres marques

FART PRODUKT

FART PRODUKT Standard SCREEN Manuel utilisateur

Draper

Draper E Series Manuel

Elite Screens

Elite Screens Elite Tripod Series Manuel utilisateur

Laarhoven

Laarhoven Companion II Manuel utilisateur

Renogy

Renogy RMS-LFPS-US Manuel utilisateur

Samsung

Samsung S*H65* Manuel utilisateur

FONESTAR

FONESTAR PPTR-43100-FA Manuel utilisateur

Slide Clear

Slide Clear Varro XL Manuel utilisateur

Elite Screens

Elite Screens M85XWS1-SRM Manuel utilisateur

OS РХ-090Н Manuel utilisateur

Niko

Niko 10-845 Manuel utilisateur

Speaka Professional

Speaka Professional 2357532 Manuel d'utilisation

Sima

Sima XL-72 Manuel utilisateur

Jasic

Jasic EVO 2.0 ET-200P Manuel utilisateur

Elite Screens

Elite Screens Starling 2 Series Manuel utilisateur

InFocus

InFocus SC-WALL GRY-92H Manuel

Barco

Barco OverView MVL-615 Manuel utilisateur

Draper

Draper Envoy Manuel