D-Link DI-784 Manuel utilisateur

DI-784

11a/11g Dualband

108Mbps Wireless Router

5V DC Power Adapter

specifications subject to change without notice. DI-784. 11142003

BefBef

Beforor

oror

ore Ye Y

e Ye Y

e You Beginou Begin

ou Beginou Begin

ou Begin

1.1.

1. If you purchased this router to share your high-speed Internet connection with other

computers, you must have either an Ethernet-based Cable or DSL modem with an

established Internet account from an Internet Service Provider (ISP).

2.2.

2. It’s best to use the same computer that is connected to your modem for configuring

the DI-784 Dualband Wireless Router. The DI-784 acts as a DHCP server and will

assign all the necessary IP address information on your network. See Appendix at

the end of this Quick Installation Guide or the Manual on the CD-ROM for

setting each network adapter to automatically obtain an IP address.

ChCh

Check Yeck Y

eck Yeck Y

eck Your Pour P

our Pour P

our Packack

ackack

ackagag

agag

age Cone Con

e Cone Con

e Contenten

tenten

tentsts

tsts

DI-784 11a/11g Dualband 108Mbps Wireless

Router

CD-ROM (containing Manual and Warranty)

Ethernet (Straight-Through) Cable

If any of the above items are missing, please contact your reseller.

This product can be set up usingThis product can be set up using

This product can be set up using

anan

any curry curr

y curry curr

y currenen

enen

ent web brt web br

t web brt web br

t web browserowser

owserowser

owser, i.e, i.e

, i.e, i.e

, i.e.,.,

.,.,

Internet Explorer 6 or NetscapeInternet Explorer 6 or Netscape

Internet Explorer 6 or Netscape

Navigator 6.2.3.Navigator 6.2.3.

Navigator 6.2.3.

Using a power supply

with a different voltage

rating will damage this

product and void the warranty

ConnConn

Connectinectin

ectinectin

ecting Thg Th

g Thg Th

g The DI-784 Wire DI-784 Wir

e DI-784 Wire DI-784 Wir

e DI-784 Wireless Router Teless Router T

eless Router Teless Router T

eless Router Too

Your Nour N

our Nour N

our Networketwork

etworketwork

etwork

C. LAN PORTS These

are the connections

for Ethernet cables to

Ethernet enabled

computers.

Reset Button

Pressing this button restores the Router to

its original factory default settings.

B. WAN PORT This is for

the connection of an

Ethernet cable to the Cable

or DSL modem.

A. Receptor for

Power Adapter.

A. First, connect the power adapter to the receptor at the back panel of the

DI-784 and then plug the other end of the power adapter to a wall outlet or power

strip. The Power LED lights up indicating proper operation.

B. 1. Power off your Cable or DSL modem; devices that do not have a on/off switch

and will require you to unplug the power adapter. Now, the DI-784 should be

powered on and the Cable / DSL modem should be turned off.

Cable / DSL modem (Power Off) – DI-784 (Power On)

2.Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL

modem. After the Ethernet cable is securely connected, power on the Cable / DSL

modem by turning on the unit or plugging in the power adapter.

Cable / DSL modem (Power On) – DI-784 (Power On)

3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel

of the DI-784. The WAN LED light will illuminate to indicate proper connection. If

the WAN LED is not illuminated, please go back to step B1 and repeat the steps.

C. Insert an Ethernet cable to LAN Port 1 on the back panel of the DI-784 and an

available Ethernet port on the network adapter in the computer you are using to

configure the DI-784. The LED light for LAN Port 1 illuminates to indicate proper

connection. (Note: The LAN Ports on the DI-784 are Auto-MDI/MDI-X. Meaning

you can use a straight-through or crossover-Ethernet cable in the LAN Ports.)

D. Computers equipped with D-Link 802.11a/b/g wireless adapters will be able to

connect out of the box with the DI-784 using their default wireless settings.

D. Antenna

Used to

wirelessly

connect to

802.11a/b/g

adapters.

Restart YRestart Y

Restart Your Computerour Computer

our Computerour Computer

our Computer

ConnConn

Connectinectin

ectinectin

ecting Ag A

g Ag A

g Add

dditiditi

ditiditi

ditionon

onon

onal Computers Tal Computers T

al Computers Tal Computers T

al Computers Too

The DI-784The DI-784

The DI-784

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped

computers to the remaining Ethernet LAN ports on the back panel of the DI-784.

WAN LED – a

solid light indicates

connection on the

WAN port. This

LED blinks during

data transmission.

LOCAL NETWORK

LEDs – a solid light

on the port indicates a

connection to an

Ethernet enabled

computer on ports 1-4.

This LED blinks during

data transmission.

11g and 11a LEDs – a

solid light indicates that

the wireless segment is

ready. This LED blinks

during wireless data

transmission.

When you have completed the steps in this Quick Installation Guide, your connected

network should look similar to this:

Status – a blinking light

indicates that the DI-784 is

functioning properly.

Power LED – a solid light

indicates a proper connection

to the power supply.

Once you have logged in, the

Home screen will appear.

Using The Setup WizardUsing The Setup Wizard

Using The Setup Wizard

The logon pop-up screen will appear.

Open your Web browser and

type “http://192.168.0.1” into the

URL address box. Then press the

Enter or Return key.

Type “admin” for the username and

leave the password field blank.

Click OK

Click Run Wizard

You will see the following screens:

Set up your new password.

You have the option to establish a

password.

Click Next

The Setup Wizard (continued)The Setup Wizard (continued)

The Setup Wizard (continued)

Choose your time zone from the

drop down list.

Click Next

If your ISP requires a Static

IP Address, and this option is

selected, then this screen will appear:

Enter the IP address

information

originally provided to you by your

ISP. You will need to complete all

the required fields.

Click Next

If you selected Dynamic IP Address,

this screen will appear: (Used mainly

for Cable Internet service.)

Click the “Clone MAC Address”

button to automatically copy the

MAC address of the network adapter

in your computer. You can also

manually type in the MAC address.

Click Next

The Setup Wizard (continued)The Setup Wizard (continued)

The Setup Wizard (continued)

Select your Internet Connection.

You will be prompted to select the

type of Internet connection for your

router.

Click Next

If you are unsure of which

setting to select, please contact

your Internet Service Provider.

This setup should be done on the computer

that is registered on the ISP’s network.

Please continue to the last part of step 4, 802.11g Wireless Setup.

The Setup Wizard (continued)The Setup Wizard (continued)

The Setup Wizard (continued)

If your ISP uses PPPoE (Point-to-

Point Protocol over Ethernet), and

this option is selected, then this

screen will appear: (Used mainly for

DSL Internet service.)

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Enter in the username and password

provided to you by your ISP.

Click Next

The default wireless settings for your

802.11g wireless network are:

SSID = default

Channel = 6

You can change these settings to

match an existing wireless network.

Click Next

802.11g Wireless Setup802.11g Wireless Setup

802.11g Wireless Setup

If you wish to use encryption for your

802.11g network, the DI-784 is

capable of three levels of wireless

encryption: 64-bit, 128-bit, and

152-bit. By default the encryption

is disabled. You can change the

encryption settings for more secure

wireless communication.

Click Next

The Setup Wizard (continued)The Setup Wizard (continued)

The Setup Wizard (continued)

Click Next

The default wireless settings for your

802.11a wireless network are:

SSID = default

Channel = 52

You can change these settings to

match an existing wireless network.

802.11a Wireless Setup802.11a Wireless Setup

802.11a Wireless Setup

Click Next

If you wish to use encryption for your

802.11a network, the DI-784 is

capable of three levels of wireless

encryption: 64-bit, 128-bit, and

152-bit. By default the encryption is

disabled. You can change the

encryption settings for more secure

wireless communication.

Test Inest In

est Inest In

est Interntern

terntern

ternet Connet Conn

et Connet Conn

et Connectiecti

ectiecti

ection.on.

on.on.

on.

You will be returned to the Home tab.

For additional settings or informa-

tion, refer to the Advanced, Tools,

or Status tabs on the web-manage-

ment interface; or to the Manual

located on the CD.

Then relaunch your Web browser

(i.e., Internet Explorer or Netscape

Navigator), to link to your favorite

Web site to test your Internet

connection.

Click to Exit

Your Setup is Complete!our Setup is Complete!

our Setup is Complete!our Setup is Complete!

our Setup is Complete!

Click Restart

Click Close

To connect to the network, make sure

the network adapter in your computer

is configured properly. Here’s how to

configure the network adapter to obtain

an IP address automatically for the

DI-784 Broadband Router.

APPENDIXAPPENDIX

APPENDIX

Click Internet Protocol (TCP/IP)

Click Properties

Select Obtain an IP address

automatically

Restart your computer

if necessary

Click OK

For Microsoft Windows XP: Go to Start >

right-click on My Network Places >

select Properties > right-click on the

Network Connection associated with the

Ethernet adapter and select Properties

(i.e., D-Link DFE-530TX+).

Autres manuels pour DI-784

Table des matières

Autres manuels D-Link Routeur sans fil

D-Link

D-Link DIR-600 Manuel utilisateur

D-Link

D-Link DIR-815 Manuel utilisateur

D-Link

D-Link DSL-2750U Manuel utilisateur

D-Link

D-Link DIR-855 - Xtreme N Duo Media Router Wireless Manuel utilisateur

D-Link

D-Link VoIP Wireless Router DVG-G5402SP Manuel utilisateur

D-Link

D-Link DIR-655 - Xtreme N Gigabit Router Wireless Manuel utilisateur

D-Link

D-Link DWR-932 Manuel utilisateur

D-Link

D-Link DI-624S - AirPlus Xtreme G Wireless 108G USB Storage... Manuel utilisateur

D-Link

D-Link DIR-120 Manuel utilisateur

D-Link

D-Link COVR-2202 Manuel utilisateur

D-Link

D-Link DWR-921 Manuel utilisateur

D-Link

D-Link DSL-2642B Guide d'installation et d'utilisation

D-Link

D-Link COVR-C1200 Manuel utilisateur

D-Link

D-Link DIR-660 Manuel utilisateur

D-Link

D-Link SharePort DIR-825 Manuel utilisateur

D-Link

D-Link DIR-451 - 3G Mobile Router Manuel utilisateur

D-Link

D-Link DIR-X1860 Manuel utilisateur

D-Link

D-Link DIR-636L Manuel utilisateur

D-Link

D-Link DSL-2640U Manuel utilisateur

D-Link

D-Link DSL-2730B Manuel utilisateur

D-Link

D-Link DSL-2740B Manuel utilisateur

D-Link

D-Link DSL-3590L Manuel utilisateur

D-Link

D-Link DIR-400 Manuel utilisateur

D-Link

D-Link DIR-605L Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur

Draytek

Draytek Vigor2120 Series Manuel utilisateur