D-Link DIR-X1530 Manuel utilisateur
AX1500 Wi-Fi 6 RouteR
DiR-X1530
QUICK
INSTALLATION
GUIDE
DIR-X1530
2
ENGLISH
CONTENTS OF
PACKAGING
CONTENTS
AX1500 Wi-Fi 6 RouteR
DiR-X1530
PoWeR ADAPteR
DC 12V/1A
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents
are available on D-Link website (see www.dlink.com).
Using a power supply with a dierent voltage rating
than the one included will cause damage and void the
warranty for this product.
etHeRNet CABLe
CONNECT THE ROUTER TO YOUR PC DURING SETUP
QuiCK iNStALLAtioN GuiDe
DIR-X1530 3
ENGLISH
DEVICE
CONFIGURATION
INSTALLATION
Make sure the DIR-X1530 is turned o before executing the commands below.
1. Connect the Ethernet cable coming from the device (modem) providing Internet access to the Ethernet WAN port
marked in yellow. Connect your computer to the router using an Ethernet cable and one of the available LAN ports.
2. Place the antennas in a vertical position.
3. Connect the power supply to the power socket located on the back panel of the DIR-X1530 router. Connect the
power supply to the mains.
a. The LEDs will turn on when the router starts up.
b. After a while, when the router is started, the following LEDs will be on steadily: Power, WiFi, LAN and WAN
(if devices are connected).
4. Open a web browser and enter the address of the router: http://192.168.0.1.
5. Press „START” and then „CONTINUE” to start the setup process.
6. From the "Connection method" drop-down menu, select "Autonomous" and click "NEXT".
DIR-X1530
4
ENGLISH
7. Detailed information about your Internet connection will appear on the screen. If the telecommunications
service provider does not require additional settings, select the „Connection type”: „Dynamic IPv4” and
press „NEXT”.
8. The next step is to set up a Wi-Fi network in the 5 GHz band. The password for this Wi-Fi network by
default is the same as for the network operating in the 2.4 GHz band. If you do not want to make additional
changes, click „NEXT”.
DEVICE
CONFIGURATION
INSTALLATION
DIR-X1530 5
ENGLISH
DEVICE
CONFIGURATION
INSTALLATION
9. If the operator of telecommunications services has not indicated additional device conguration settings, for
the stages of conguration of IPTV and VoIP services, press „NEXT”.
10. For security reasons, it is recommended to change the default access password to the device’s conguration
panel. In the „User’s interface password” eld, you can enter your unique password and conrm the change by
clicking the „NEXT” button.
DIR-X1530
6
ENGLISH
11. After the conguration, a page summarizing the settings will appear. To accept them, click „APPLY”.
If the router does not detect an Internet connection, an appropriate page with additional information will
be displayed. In case of problems with the correct conguration, please contact your Internet Service
Provider to conrm the correct connection settings.
DEVICE
CONFIGURATION
INSTALLATION
DIR-X1530 7
ENGLISH
TECHNICAL SUPPORT dlink.com/support
TROUBLESHOOTING
INSTALLATION AND CONFIGURATION PROBLEMS
1. HOW DO I CHECK MYWIRELESS NETWORK NAME (SSID) AND WIRELESS NETWORK ENCRYPTION KEY?
- Connect your PC to the router using an Ethernet cable.
- Open a web browser and enter the address of the router: http://192.168.0.1
- Log in to the router using the username admin and the password entered during the setup process.
- After logging in, you can congure the router using the Setup Wizard or make changes manually.
Notes: If the password has been changed and you forgot it, you need to reset the router to factory settings.
2. HOWTO RESETTHE DIR-X1530TO FACTORY SETTINGS?
- If you forget your router's administrator password, you can (using a tool such as a straightened paper clip) press and
hold the reset button on the bottom of the router for about 10 seconds.
Notes: Resetting the router to factory settings will delete the current conguration settings. To recongure your router,
log in as explained in question 1, then run the Setup Wizard.
3. HOW DO I ADD A NEWWIRELESS CLIENT OR COMPUTER IF I HAVE FORGOTTEN THEWIRELESS
NETWORK NAME (SSID) OR WIRELESS NETWORK ENCRYPTION KEY?
- Use the correct wireless network name (SSID) and encryption key on each computer that you want to wirelessly
connect to the router.
- Use the router conguration panel (as in question 1 above) to check and select the wireless network settings.
- Make sure you save your settings so that you can re-enter them later
to any wirelessly connected computer. There is a space at the back of this document to record this important information
for future use.
4. WHY CAN'T I ESTABLISH A CONNECTION TO THE INTERNET?
- If you are establishing a WAN connection using a wired/ADSL service, make sure your modem is turned on/connected
and working, and that the service is set up correctly.
DIR-X1530
8
БЪЛГАРСКИ
TA
AX1500
DIR-X1530
12V 1A
ETHERNET (CAT5 UTP)
В МОМЕНТА НА ИНСТАЛИРАНЕТО СВЪРЖЕТЕ РУТЕРА
КЪМ КОМПЮТЪРА
Ако в кутията липсват части или оборудване, моля,
свържете се незабавно с продавача
DIR-X1530 9
БЪЛГАРСКИ
ИНСТАЛАЦИЯ НА ХАРДУЕРА
Преди да изпълните следните команди, уверете се, че маршрутизаторът DIR-X1530 е изключен.
1. Свържете захранването към рутера. След това свържете Ethernet кабела към WAN порта, маркиран в жълто.
За да свържете компютъра си към рутера с кабел, свържете Ethernet кабела към LAN порта на вашия рутер и
към Ethernet порта на вашия компютър.
2. Поставете антената вертикално.
3. Свържете захранването към електрическата мрежа.
a. Светодиодите светват, когато стартира маршрутизаторът.
b. След известно време, когато маршрутизаторът се стартира, ще светят постоянно следните светодиоди:
Захранване, WiFi, LAN (ако устройствата са свързани).
4. За да конфигурирате рутера, отворете уеб браузъра си и въведете адрес http://192.168.0.1. Ще се покаже
следната конфигурационна страница, налична само на английски.
5. Кликнете върху "START" и след това върху "CONTINUE", за да започнете процеса на настройка.
6. От падащото меню "Connection method" ("Метод на свързване") изберете "Autonomous" ("Автономен ")
и кликнете върху "NEXT".
DIR-X1530
10
БЪЛГАРСКИ
7. На екрана ще се покаже подробна информация за вашата интернет връзка. Ако вашият доставчик
на телекомуникационни услуги не изисква допълнителни настройки, изберете типа връзка „Connec-
tion type”: „Dynamic IPv4” и кликнете върху „NEXT”.
8. Следващата стъпка представлява подобна конфигурация на WiFi мрежата, но в 5GHz обхват. По
подразбиране паролата за тази Wi-Fi мрежа е същата като мрежата в обхват 2.4GHz. Ако не искате
да правите никакви допълнителни промени, кликнете върху „NEXT”.
ИНСТАЛАЦИЯ НА ХАРДУЕРА
Autres manuels pour DIR-X1530
4
Table des matières
Langues :
Autres manuels D-Link Routeur sans fil
D-Link
D-Link M15 Manuel utilisateur
D-Link
D-Link DSL-2880AL Guide d'installation et d'utilisation
D-Link
D-Link Wireless N Manuel utilisateur
D-Link
D-Link DIR-652 Manuel utilisateur
D-Link
D-Link AirPlus DI-614+ Manuel utilisateur
D-Link
D-Link DIR-300A Manuel utilisateur
D-Link
D-Link COVR-C1210 Manuel utilisateur
D-Link
D-Link DIR Series Manuel utilisateur
D-Link
D-Link Vonage VWR Manuel utilisateur
D-Link
D-Link DSL-2750U Manuel utilisateur
D-Link
D-Link DIR-510L Manuel utilisateur
D-Link
D-Link DWR-961 Manuel utilisateur
D-Link
D-Link DSL-2877AL Manuel utilisateur
D-Link
D-Link DIR-867 Manuel utilisateur
D-Link
D-Link DHP-1220AV Manuel utilisateur
D-Link
D-Link DIR-620 Manuel utilisateur
D-Link
D-Link Verizon DSL-2750B Manuel utilisateur
D-Link
D-Link DSL-2740B Manuel utilisateur
D-Link
D-Link DWR-2101 Manuel utilisateur
D-Link
D-Link DIR-835 Manuel utilisateur
