D-Link Air Premier DAP-2695 Manuel utilisateur
AirPremier®
AC1750 DUAL BAND PoE ACCESS POINT
DAP-2695
Quick Installation Guide+
Краткое руководство по установке+
Guía de Instalación Rápida+
Guia de Instalação Rápida+
快速安裝指南+
Petunjuk Pemasangan Cepat+
クイックインストールガイド+
D-Link DAP-2695 Quick Install Guide
2
ENGLISH
Minimum System Requirements:
• CD-ROM Drive
• Computers with Windows®, Macintosh®, or Linux-based operating
systems
• Installed Ethernet adapter or wireless adapter
• Internet Explorer 7, Chrome, Firefox, or Safari 4 or higher
System Requirements
Package Contents
Note: Using a power supply with a different voltage than the one included with the DAP-2695 will
cause damage and void the warranty for this product. If any of the above items are missing, please
contact your reseller.
DAP-2695 802.11ac
Access Point
Power Adapter
Ethernet Cable
PoE Base Unit
CD-ROM
Console Cable Mounting Plate
D-Link DAP-2695 Quick Install Guide
3
ENGLISH
Hardware Overview
LEDs
5 GHz - When lit, the access point is operating at 5GHz.
This light will blink when there is wireless trafc.
2.4 GHz - When lit, the access point is operating at 2.4GHz. This light
will blink when there is wireless trafc.
LAN1/LAN2 - Solid light when the Ethernet port is connected to a
working port, such as a router or switch. The light will blink when there
is trafc through LAN port.
POWER - The light will blink during boot up. Once solid, the access
point is ready.
D-Link DAP-2695 Quick Install Guide
4
ENGLISH
Installing the Hardware
LAN Port (PoE)
Reset Button
Power Receptor
Console Port
5GHz Antenna Connectors*
* 1 x 5GHz and 2 x 2.4GHz antenna connectors are located on the bottom of the access point.
LAN Port
2.4GHz Antenna Connectors*
D-Link DAP-2695 Quick Install Guide
5
ENGLISH
To power the access point, you can use one of the following 3 methods:
Method 1 - Use if you have a PoE switch.
Method 2 - Use if you do not have a PoE switch and do
not have a power outlet near the location of the
access point.
Method 3 - Use if you do not have a PoE switch and have
a power outlet near the location of the access
point.
Method 1
1. Connect one end of your Ethernet cable into the LAN1 (PoE) port
on the DAP-2695.
2. Connect the other end into one port on a PoE switch.
D-Link DAP-2695 Quick Install Guide
6
ENGLISH
Method 2
1. Connect one end of an Ethernet cable into the Data In port on
the PoE base unit and the other end into one port on your switch,
router, or computer.
2. Connect one end of an Ethernet cable into the P+Data Out port on
the PoE base unit and the other end into the LAN1 (PoE) port on
the DAP-2695 access point.
3. Use the supplied power adapter. Connect the power adapter to the
Power In receptor on the PoE adapter.
4. Connect the other end of power adapter into a power outlet.
D-Link DAP-2695 Quick Install Guide
7
ENGLISH
Method 3
1. Connect one end of your Ethernet cable into the LAN1 (PoE) or
LAN2 port on the DAP-2695 and then connect the other end to a
switch, router, or computer.
2. Use the supplied power adapter. Connect the power adapter to the
Power receptor on the DAP-2695 access point.
3. Connect the other end of power adapter into a power outlet.
D-Link DAP-2695 Quick Install Guide
8
ENGLISH
Conguration
Note: It is recommended to congure your DAP-2695 before mounting.
The easiest way is to connect to the Access Point directly to a computer
using an Ethernet cable. Statically assign the IP address of your computer
to 192.168.0.2 with a subnet mask of 255.255.255.0.
Step 1: Open a web browser (e.g., Internet Explorer, Chrome, Firefox , or
Safari) and enter http://192.168.0.50.
Step 2: At the login screen, enter admin for the user name and leave the
password blanks. Click Login to continue.
Step 3: After the home page appears, go to Basic Settings > LAN to
change the IP settings of the DAP-2695. Go to Basic Settings > Wireless
to congure your wireless settings.
Note: Make sure you click on Conguration > Save and Activate to save
your settings.
D-Link DAP-2695 Quick Install Guide
9
ENGLISH
Step 1: Insert the provided wall anchors in the wall where the mounting
plate will be attached.
Mounting Plate Assembly
Step 2: Use the provided screws to secure the mounting plate on the wall.
Step 3: Attach the remaining screws securely to the back of the DAP-
2695.
D-Link DAP-2695 Quick Install Guide
10
ENGLISH
Step 4: Attach the DAP-2695 to the mounting plate.
Step 5: Slide the DAP-2695 down into the grooves on the mounting plate
to secure it to the plate.
Autres manuels pour Air Premier DAP-2695
9
Table des matières
Langues :
Autres manuels D-Link Point d'accès sans fil
D-Link
D-Link DWR-966 Manuel utilisateur
D-Link
D-Link AC1200 Manuel utilisateur
D-Link
D-Link DBA-X2830P Manuel utilisateur
D-Link
D-Link DAP-3666 Manuel utilisateur
D-Link
D-Link DWP-1010 Manuel utilisateur
D-Link
D-Link DAP-3662 Manuel utilisateur
D-Link
D-Link AirPremier DWL-7700AP Manuel utilisateur
D-Link
D-Link NUCLIAS CONNECT Manuel utilisateur
D-Link
D-Link DWL-2200AP - AirPremier - Wireless Access... Manuel utilisateur
D-Link
D-Link AirPremier N DAP-2555 Manuel utilisateur
D-Link
D-Link DBT-900AP Manuel utilisateur
D-Link
D-Link DWL-3600AP Manuel de service
D-Link
D-Link DAP-2660 Manuel utilisateur
D-Link
D-Link DAP-1360 Manuel utilisateur
D-Link
D-Link DWL-3200AP - AirPremier - Wireless Access... Manuel utilisateur
D-Link
D-Link DAP-2610 Manuel utilisateur
D-Link
D-Link DWL-6610AP Manuel utilisateur
D-Link
D-Link AirPremier N DAP-2690 Manuel utilisateur
D-Link
D-Link AirPremier DAP-2553 Manuel utilisateur
D-Link
D-Link DAP-400P Manuel utilisateur
