D-Link DCH-G020 Guide d'installation et d'utilisation

Dear customer,

To restore the DCH-G020 proceed as follows

In Case the LED is flashing red

-----------------------------------------

Manual update process for the DCH-G020:

-----------------------------------------

Log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the password is the pin

on the bottom of the device.

Please upload the following firmware (unzip the file and upload only the bin file)

ftp://ftp.dlink.de/dch/dch-g020/archive/driver_software/DCH-G020_fw_reva_123b02_beta.zip

After the update, reset the DCH-G020 twice to 1. Activate the new firmware and 2. Reset the Z-Wave

controller. Please wait between the reset until the device is powered up again

After that log in to the web interface of the DCH-G020 again and upload the latest firmware.

ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip

The DCH-G020 should be running again with a green LED.

Please add the DCH-G020 to your mydlink Account.

-----------------------------------------

In Case the LED is constantly red

-----------------------------------------

Recoveryupdate for the DCH-G020:

-----------------------------------------

Download the following firmware (unzip first and upload only the bin file)

ftp://ftp.dlink.de/dch/dch-g020/archive/driver_software/DCH-G020_fw_reva_123b02_beta.zip

1. Connect your pc with a cable to your router

2. Change the IP address of your LAN port to 192.168.0.123

3. Unplug the DCH-G020 and press the Reset button while you plug it back in. Hold the Reset

button until the LED is flashing red.

4. Open http://192.168.0.60 in a Webbrowser

5. Upload the firmware 1.23b02_beta

After the Upload the LED should be green again.

If the LED is still red, the DCH-G020 is defective please issue a RMA.

If the LED is green, please change your LAN port ipv4 settings back to DHCP and reset the DCH-G020.

After the reset log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the

password is the pin on the bottom of the device.

Upload the latest firmware

ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip

Please add the DCH-G020 to your mydlink Account.

-----------------------------------------

-----------------------------------------

If you have Z-Wave devices connected to the DCH-G020 before the issue you have to do the

following for every Z-Wave device

-------------------------------------

Reset the Z-Wave Device

-------------------------------------

For every Z-Wave Device:

1. Press the connect button on the DCH-G020

(LED flashing orange)

2. Press the black pin on the back of the device four times in two seconds.

3. And hold the pin at the four times until the device pulse red down.

The device will start flashing slowly red for the next two minutes; you have now two minutes to

reconnect the device with the DCH-G020 through the APP

Autres manuels pour DCH-G020

2

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link DE-81 6TP Manuel utilisateur

D-Link

D-Link GO-SW-8G Manuel utilisateur

D-Link

D-Link DXS-3600-16S Manuel utilisateur

D-Link

D-Link DGS-1210-52MP Manuel utilisateur

D-Link

D-Link DGS-3130-30PS Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

D-Link

D-Link xStack DGS-3427 Manuel utilisateur

D-Link

D-Link DGS-1024D - Switch Manuel utilisateur

D-Link

D-Link DES-1105 - Desktop Switch Manuel utilisateur

D-Link

D-Link DES-3528 - xStack Switch - Stackable Manuel

D-Link

D-Link xStack DGS-3620 Series Manuel utilisateur

D-Link

D-Link Nuclias DNH-100 Manuel utilisateur

D-Link

D-Link DGS-1005G Manuel utilisateur

D-Link

D-Link Nuclias DNH-100 Manuel utilisateur

D-Link

D-Link DES-3550 Manuel utilisateur

D-Link

D-Link xStack DGS-3324SRi Manuel utilisateur

D-Link

D-Link xStack DGS-3450 Manuel

D-Link

D-Link DES-1024D Manuel utilisateur

D-Link

D-Link DGS-1008MP Manuel utilisateur

D-Link

D-Link DES-3226 Manuel utilisateur

D-Link

D-Link DCH-G020 Manuel utilisateur

D-Link

D-Link DIS-RK200G Manuel utilisateur

D-Link

D-Link DGS-1010MP Manuel utilisateur

D-Link

D-Link DKVM-4K - KVM Switch Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur