D-Link DCS-6212L Manuel utilisateur

DCS-6212L

Quick Install Guide

Full HD Outdoor PoE Mini Dome Camera

If any of the above items are missing, please contact your reseller.

DCS-6212L Full HD Outdoor PoE Mini Dome Camera

Power Adapter (preattached to camera)

Package Contents

Quick Install Guide

Ethernet Cable (preattached to camera)

Mounting Kit

Minimum Requirements

Mobile Device (to use mydlink Lite app)

• iPhone, iPad, or Android smartphone or tablet

(Refer to the mobile app’s store page to see if your device is compatible)

Network Device and Service

• A router with Internet service

• A Power over Ethernet (PoE) switch or router (for PoE)

• An e-mail account (required to create a mydlink® account)

* If you use a mobile device with the mydlink Lite app, a PC is not required for

setup. Refer to Setting up Your Camera on page 3.

ENGLISH

Setting Up Your Camera

System Requirements: Refer to the mydlink Lite app page on Apple App Store, Google Play or Windows Phone Store.

Launch the mydlink Lite app, then create a new account or log in to your

existing account.

Download the free mydlink Lite app on your smartphone or tablet by

scanning the QR code below, or by searching for mydlink Lite in the app

store for your device.

3The app will guide you through the rest of the conguration process.

ENGLISH

Mount the Camera

Please refer to the steps below to assist you with mounting the camera.

1. Use the included wrench to loosen the 3 screws

on the top of the camera, then lift the camera

cover o.

2. Place the camera in the position you want

and use a pencil to mark the holes. Ensure the

camera is oriented correctly with adequate

space for the necessary cables to be routed.

3. Depending onthematerial ofthe wall orceiling,

use proper tools to drill two holes 25mm deep

with a 6mm drill bit where you marked. After

drilling the holes, insert the plastic anchors to

support the screws.

If you are running the camera cables through

the wall, drill a hole in the center and pull the

cables through the hole.

4. If you are using PoE to power the camera, use a

small Philips screwdriver to remove the screws

for the power connector cover, then disconnect

the power cable.

5. Place the power cable plug into the gap, then

reattach the cover with the screws.

ENGLISH

6. Mount the camera on the wall or ceiling using

the screws provided.

7. Tilt and rotate the camera to your desired

position. It may be helpful to do this while the

camera is connected to your network so you

can view its live video for reference.

9. Reattach the camera cover with the screws and

included wrench.

10. If you are running the camera cables out the

side of the camera, remove the cable channel

cover and guide the camera cables through

the cable channel before reattaching the

cover.

8. If you want to use a microSD card, lift the rubber

flap on the side of the camera to expose the

microSD card slot. Insert the microSD card, then

close the rubber ap and make sure it is sealed

properly.

ENGLISH

1. What is a mydlink No.? What is it used for?

Each camera has a unique eight-digit mydlink No. which will be shown on

the label on your camera. This eight-digit number identies your device,

and is required to add your device to your mydlink account.

2. What can I do if my DCS-6212L is not working correctly?

• Reset the camera (see FAQ #3 below) and run the setup steps starting

on page 3 again.

• To make sure your hardware is installed correctly, make sure that:

- the power LED is solid green

- your Internet connection is working

- your router’s LAN connections are working

- your router supports UPnP®

- your camera is on the same network as your mobile device

- both your mobile device and camera have a working Internet connection

• If your camera is still not working, check your router and make sure it

has the latest rmware.

3. What can I do if I forget my password?

FAQs

If you forget your password, you must reset the camera. Unfortunately,

this process will change your settings back to factory default. To reset the

camera, locate the reset button on the camera. With the camera powered

on, use an unfolded paper clip to hold the button down for 10 seconds.

Run the setup procedure located on page 3 once the camera restarts.

Reset Button

ENGLISH

4. Why is there a white haze when viewing in night vision mode?

When viewing in night vision mode, the IR lights on the camera may be

reecting o a nearby surface. Try repositioning the camera in order to

avoid glare from IR LEDs.

ENGLISH

Technical Support

This guide is for initial conguration. Please refer to the user manual

to learn more or visit http://www.mydlink.com for more information.

U.S. and Canadian customers can contact D-Link Technical Support

through our website.

http://support.dlink.com

USA

http://support.dlink.ca

Canada

Version 1.00(US)_90x130

May 12, 2015

RMN0101692

Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Product

specications, size and shape are subject to change without notice, and actual product appearance may

dier from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.

Autres manuels pour DCS-6212L

Table des matières

Autres manuels D-Link Caméra de sécurité

D-Link

D-Link DCS-6517 Manuel utilisateur

D-Link

D-Link DCS-2670L Manuel utilisateur

D-Link

D-Link DCS 6513 Manuel d'installation et d'exploitation

D-Link

D-Link DCS-5222L Manuel utilisateur

D-Link

D-Link DCS-6815 Manuel utilisateur

D-Link

D-Link DCS-960L Instructions d'utilisation et d'entretien

D-Link

D-Link DCS-930L Manuel utilisateur

D-Link

D-Link DCS-4712E Manuel utilisateur

D-Link

D-Link DCS-7413 Manuel utilisateur

D-Link

D-Link MyDlink DCS-8515LH Manuel utilisateur

D-Link

D-Link DCS-8000LH Manuel utilisateur

D-Link

D-Link DCS-7413 Manuel utilisateur

D-Link

D-Link DCS-6314 Manuel utilisateur

D-Link

D-Link DCS-4701E Manuel utilisateur

D-Link

D-Link DCS-932L Manuel utilisateur

D-Link

D-Link Securicam DCS-3415 Manuel utilisateur

D-Link

D-Link DCS-4622 Manuel utilisateur

D-Link

D-Link DCS-935L Manuel utilisateur

D-Link

D-Link DCS-6410 Manuel utilisateur

D-Link

D-Link DCS-936L Manuel utilisateur

D-Link

D-Link DCS-1201 Manuel utilisateur

D-Link

D-Link DCS 6513 Manuel utilisateur

D-Link

D-Link DCS-6112V Manuel utilisateur

D-Link

D-Link DCS-5222L Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur