D-Link DPH-400SE Manuel utilisateur
2D-Link DPH-400S(SE) Quick Install Guide
• 10/100Mbps Ethernet network environment
• Internet ExplorerTM 6.0 or Mozilla FirefoxTM 1.0 and above
CAT5 Ethernet Cable
Package Contents
D-Link DPH-400SE
(with PoE) or DPH-400S
(without PoE) IP phone
unit
System Requirements
If any of the above items are missing, please contact your reseller.
CD-ROM
©2007 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specications subject to change without notice.
Handset
Handset cord
Quick Install Guide
Power Adapter
Wall-mounting
screw pack
Wall-mounting
template sheet
3 D-Link DPH-400S(SE) Quick Install Guide
Front View
Hardware Overview
The DPH-400S is a SIP-based Internet desktop phone that connects
to a digital network rather than the traditional PSTN line. It can perform
VoIP calls and data transfer for network users. The DPH-400 series
includes DPH-400SE (PoE built-in), DPH-400S (no PoE), and DPH-
400EDM (Expanded Dial Module).
4D-Link DPH-400S(SE) Quick Install Guide
NO Part Name Description of function
0 Main unit The IP Phone main unit
1 Handset top cradle For the placement of handset
(Receiver end)
2 Hook switch For hang-up and hang-off of
handset
3 Cradle latch To prevent the handset from
dropping when it stands at 60oor
is wall-mounted.
4 Speaker For ring and hands free talking
5 Handset bottom cradle For the placement of handset
(Transmitter end)
6 Handset cord port RJ-9 jack on the left side of the
IP phone
7 Headset wire port RJ-9 jack on the left side of the
IP phone
8
Message LED
This red LED to indicate the status
of account resister, incoming call
and message waiting.
9 LCD screen The LCD screen is for displaying
your settings, phone number, call
status and other information. It
supports 128 x 64 pixels.
10
Soft keys
The keys used for item selection
or control on the LCD screen.
Each key function depends on its
corresponding content displayed
on the LCD screen at that time.
11 Navigator OK key It is used to conrm a setting or
dial a phone number
5 D-Link DPH-400S(SE) Quick Install Guide
Hardware Overview
12 Navigator Control Keys The four arrows ◄►▲▼are used
to move through the items on the
LCD screen.
13 1,2,3,4 Number These keys can be used for line
selection or programmable
14 Speaker key The Speaker key is used to
activate/de-activate the Hands
free dial or talk. A green LED is
associated to indicate its status.
15 Mute key The Mute key is used to
turn on and off the voice
transmission from the IP phone.
The key lights red to indicate
that the phone is muted.
16 Headset key The Headset key is used to
activate/de-activate the Headset.
A green LED is associated
to indicate its status.
6D-Link DPH-400S(SE) Quick Install Guide
17 Transfer key To transfer a call to another IP
phone.
Redial Key To redial the last dialed number
automatically.
Hold Key To hold the current call and
answer another incoming call.
Press it again to release the hold
function.
Message Key To get access to Voice Mail System
for message retrieval.
Conference Key To drop the current multiple
connected phones into a
conference. It is a phone-bridged
function.
Phonebook Key To enter into the phonebook to
call or edit a phone number. After
you press the Phonebook key, the
phonebook is displayed on the
LCD screen of the IP phone.
18
Volume Control Key
It is used for volume control:
When the phone is idle, the ringer
is adjusted. When talking, the
handset, speaker, and headset
output volume is adjusted.
19 [1], [2]…[9], [*], [0], [#]: The numeric
keypad for dialing numbers
20 Built-in Microphone The built-in microphone is on the
front edge of the IP phone.
7 D-Link DPH-400S(SE) Quick Install Guide
Side View
Rear View
Port & LED Functions
Handset
Jack (RJ-9)
Headset
Jack (RJ-9)
12345
No Part Name Description of Port Function
1 Reset button Reset the settings to the factory defaults
settings
2 Link/Activity To indicate the link status of LAN and PC ports
3 LAN port RJ-45 Jack 100/10Mbps Ethernet port for
connecting to IP network
4 PC port RJ-45 Jack 100/10Mbps Ethernet port for
connecting to a PC or Notebook
5 Power Jack If a power source from an adapter is required,
please use the standard power adapter supplied
in the package (5VDC/2A).
8D-Link DPH-400S(SE) Quick Install Guide
The table below denes the behaviours of different LEDs on the IP
Phone:
LED Color Status Description
Message Red
Off No new messages
Blinking New voice message
1,2,3,4
VoIP line keys Green
Off No active line. The phone
is on-hook
Solid When the line is active
(dialing or during a call)
Blinking Incoming call while you are
engaged in another call
Speaker key Green
Off The speaker is not in use
Solid While in on-hook dialing
mode or hands-free mode
Mute key Red
Off The phone is not muted
Solid The phone is muted
Headset key Green
Off The headset is not in use
Solid While in on-hook dialing
mode or hands-free mode
using a headset
All LEDs for
system status Green
Off In normal operation mode
Steady During system booting
Blinking When system booting failed
or critical error
9 D-Link DPH-400S(SE) Quick Install Guide
Connecting to the Network and a PC
Follow the gure below to connect the ports on the phone to different
devices.
If your Ethernet switch supports PoE(Power over Ethernet), the
DPH-400SE IP phone can be powered thru the LAN port. A power
adapter is not required.
Handset
Ethernet
Ethernet CableEthernet Cable
Installation
10D-Link DPH-400S(SE) Quick Install Guide
When the DPH-400SE/DPH-400S IP phone is registered successfully
to a SIP server, then you can start the phone operations. At rst,
please refer to the LCD screen on the IP phone to congure the
settings.
Basic Phone Operations
Operation Description
Making a call Pick up the handset or press a line
key.
You will hear a dial tone.
Use the keypad to dial the phone
number.
The LCD screen displays the
number you enter
Hang up the handset when your
conversation is over.
Receiving a call Pick up the handset upon hearing
the phone ringing.
Hang up the handset when your
conversation is over.
Last Number
Redial
Pick up the handset or press a line
key.
Press the Redial key. The last
dialed number will be automatically
redialed.
Note: You may use the
Backsp soft key to delete
the last digit.
Getting Started
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels D-Link Téléphone IP
D-Link
D-Link DPH-150S Manuel utilisateur
D-Link
D-Link DVG-5121SP Manuel du propriétaire
D-Link
D-Link EXPRESS ETHERNETWORK DPH-140S Manuel utilisateur
D-Link
D-Link DPH-70 Manuel utilisateur
D-Link
D-Link DPH-150SE Manuel utilisateur
D-Link
D-Link DPH-80 Manuel utilisateur
D-Link
D-Link DPH-150SE Manuel utilisateur
D-Link
D-Link DPH-10U Manuel utilisateur
D-Link
D-Link DPH-20U Manuel utilisateur
D-Link
D-Link DPH-100 Manuel utilisateur
D-Link
D-Link DPH-150S Manuel utilisateur
D-Link
D-Link Telkom DWR-720/PW Manuel utilisateur
D-Link
D-Link DPH-100M Manuel utilisateur
D-Link
D-Link DPH-150S Manuel utilisateur
D-Link
D-Link DPH-128MS - VoiceCenter VoIP Phone Manuel utilisateur
D-Link
D-Link DPH-130S Manuel utilisateur
D-Link
D-Link DPH-100H Manuel utilisateur
D-Link
D-Link DPH-150SE Manuel utilisateur
D-Link
D-Link DPH-850S Manuel utilisateur
D-Link
D-Link DHA-130 Manuel utilisateur
