D-Link NetDefend DFL-860 Manuel utilisateur
Network
Security UTM Firewall
This Quick Guide will guide you through the installation Process. You are
only moments away from using your new D-Link Network Security Product
Building Networks for People
DFL-860
1.Before You Begin
1.1 Check Your Package Contents....................................................................1
2.Indentifying Components
2.1 FrontView.................................................................................................2
2.2 LED Indicators...........................................................................................3
2.3 Default Interface Attribute Definition.........................................................3
3.Connecting the DFL-860
3.1 Setting up Firewall to your Network........................................................4
4.Configure DFL-860
4.1 Configure your Computer’s IP..................................................................5
4.2 Using the Setup Wizard.............................................................................6
5.Appendix
5.1 How to Configure Static IP Manually on Microsoft Windows XP..............14
5.2 How to Configure Static IP Manually on Apple MAC OS X...........................15
6.Statement
DFL-860 Quick Installation Guide
1.1 Check Your Package Contents
Your NetDefend Network Security UTM Firewall package should
contain all the items listed below. If any of these items is found
damaged or missing in your package, report it to your reseller
immediately for replacement.
DFL-860 NetDefend™ Network Security UTM Firewall
Power Cord
5V DC Power Adapter
Console Cable (RS-232 cable)
Ethernet (CAT5 UTP/Straight Through) Cable
Ethernet (CAT5 UTP/Cross-over) Cable
CD-ROM (containing QIG/Manual )
Rack Mount Brackets
2 x NetDefend UTM Subscription (IPS & Anti-Virus)
DFL-860
Before You Begin 1
01
DFL-860 Power Cord Power Adapter
Ethernet Cable
(Straight-Through)
Console Cable CD-ROM
Ethernet Cable
(Cross-over)
Rack Mount Brackets
NetDefend UTM
Subscription
Identifying Components 2
The following illustrates the front panel of the DFL-860 and
explains the front panel’s key components:
2.1 Front View
1 2 3 4 5 6
02
1. Power LED
2. System LED
3. WAN Ports
4. DMZ Port
5. LAN Ports
6. Console Port
Power indication of the DFL-860.
System status indication of the DFL-860.
These are for the connection of an Ethernet cable to a Cable
or DSL modem.
This is for the connection of an Ethernet cable to an DMZ
network.
These are for the connection of Ethernet cables to the internal
network.
Connects to RS-232 console cable that connects to PC.
The console port is hidden behind a protection coverlid that
can be opened by pulling down the lid.
Note:
None of the WAN1 and WAN2 interfaces support Auto MDI/MDI-X
(Automatic cable detection for Straight-through and Crossover
function.
2.3 Default Interface Attribute Definition
Note:
NetDefendOS only allows Web GUI access from LAN port by default
for security consideration. Please refer to user manual for more
detail about how to change this conguration.
DFL-860 Quick Installation Guide
03
Wording on
Front plate
Default name
in rewall
Default interface
type denition
Default interface
IP Address
Default
DHCP Status
WAN1 WAN1 DHCP client N/A Enabled
WAN2 WAN2 Static IP 192.168.120.254/24 Disable
DMZ DMZ Static IP 172.17.100.254/24 Disable
Ports: 1~7 LAN Static IP 192.168.1.1/24 Disable
2.2 LED Indicators
Status
Solid green
Light off
Solid green
Light off
Blinking green
Light off
Solid Green
Blinking Green
Light off
Solid green
Description
The device is powered on.
The device is powered off.
System is operating properly.
The device is not working.
System is defective, such rmware
upgrade fail.
No link
Link present
Port is sending or receiving data.
Port is operating at 10Mbps.
Port is operating at 100Mbps.
Color
Green
Green
Green
Green
LED
Power
System
Phone Jack LED
light (right)
Phone Jack LED
light (left)
3.1 Connecting Firewall to Your Network
A. First, connect the power cord to the receptor at the back panel of
the DFL-860 and then plug the other end of the power cord to a
wall outlet or power strip. Then powered on the DFL-860 using
the on/off switch. Now the Power LED will turn ON to indicate
proper operation. After the power LED turns on, you need to wait
1-2 minutes for the DFL-860 to boot up completely.
B. Connect an Ethernet cable from the DFL-860 to your Cable/
DSL modem. If the Cable/DSL modem is powered on, wait for
the WAN1 LED on the DFL-860 to light up to show a proper
connection. Otherwise, turn off your Cable/DSL modem, connect
the Ethernet cable from the DFL-860 to your Cable/DSL modem,
and turn on the Cable/DSL modem. Some Cable/DSL modems
may not have an on/off switch and will require you to unplug the
power adapter.
Note:
The default management IP address of the DFL-860 is
192.168.1.1. If you have are using a router that uses DHCP,
there may be a conict if the router uses the same IP address as
the DFL-860. If this is the case, either disconnect the DFL-860
from the router and change the management IP address of the
DFL-860, or change the DHCP settings on your router.
C. Insert an Ethernet cable to the LAN1 port on the front panel of
the DFL-860 and connect it to a port on your network hub or
switch. The LED light above the Ethernet port on the DFL-860
will illuminate to indicate proper connection
D. Connecting the computer that you will use to congure the
DFL-860 to the network hub or switch.
Connecting the DFL-860 3
04
4.1 Configure Your Computer’s IP Address
Make sure that the network adapter in your computer is congured
to use a static IP address with 192.168.1.1 as default gateway and
255.255.255.0 as netmask. Instructions on how to congure the
network adapter can be found in the appendix.
When you have completed the steps in this Quick Installation
Guide, your connected network should look similar to this:
Configure DFL-860 4
05
Cable/DSL Modem
DFL-860
Switch
Internal
Network
DMZ
Network
(optional)
Computer1 Computer2
4.2 Using the Setup Wizard
The DFL-860 provides Web based conguration. You can congure
your DFL-860 through Internet Explorer 6 and later or Firefox 1.0 and
later browser in MS Windows, Macintosh or UNIX based platforms.
Activate your browser, and ensure your built-in Pop-Up Blocker has
been disabled, so that the Pop-Up Blocker will not block the Startup
Wizard while you initiate the NetDefend Firewall for the rst time.
Additionally, in order to reduce the impact of Pop-Up Blocker, a user-
friendly mechanism has beem implemented in NetDefend Firewalls. A
"Startup Wizard" button is shown on the toolbar since rmware v2.20.
This button is available on the WebGUI while the appliance is initiated
with Conguration Version 1. Once you complete conguration and
save/activate the setting, the Startup Wizard button will be removed
automatically from the toolbar while you login WebGUI next time.
Now, let's start on WebGUI login, type the IP address of the DFL-860,
e.g. https://192.168.1.1, in the Location (for Netscape) or Address (for
IE) eld and press "Enter".
Log on to the DFL-860 web interface.
To start using the DFL-860 web interface you need to log on
using the default username and password.
DFL-860 Quick Installation Guide
Open your Web browser and
type https://192.168.1.1 /
into the URL address box.
Then press the Enter or
Return key.
Type the default
Username/Password
Username: admin
Pasword: admin
and click Login
06
Note:
DFL-860 allows either HTTP or a secure HTTPS connection
from any management host. However, for security reason, by
default only a secure HTTPS connection is allowed.
Step1 - Welcome to the DFL-860 setup wizard!
Step2 - Set up rewall administrator password
First Enter the
username that you want
to use for the admin
account.
Enter the password
that you want to use
for the admin account.
DFL-860 Quick Installation Guide
This wizard will guide
you through the setup of
your DFL-860
Click Next
07
Click Next
2
Step 3 - Set up time and date
Click Set time and date
button for setting device
08
Click Next
Select the appropriate date
Enter the appropriate time
Click OK
DFL-860 Quick Installation Guide
Table des matières
Autres manuels D-Link Pare-feu
D-Link
D-Link NetDefend DFL-260E Manuel utilisateur
D-Link
D-Link NetDefend Firewall Series Manuel utilisateur
D-Link
D-Link DFL-300 - Security Appliance Manuel utilisateur
D-Link
D-Link DFL-800 - Security Appliance Instructions d'installation et d'utilisation
D-Link
D-Link DFL-210 - NetDefend - Security Appliance Mode d’emploi
D-Link
D-Link DFL-80 Manuel utilisateur
D-Link
D-Link DFL-1600 - Security Appliance Manuel utilisateur
D-Link
D-Link D DFL-500 DFL-500 Manuel utilisateur
D-Link
D-Link DFL-210 - NetDefend - Security Appliance Mode d’emploi
D-Link
D-Link DFL-700 - Security Appliance Manuel utilisateur
D-Link
D-Link DFL-210 - NetDefend - Security Appliance Manuel utilisateur
D-Link
D-Link NetDefend DFL-800 Manuel utilisateur
D-Link
D-Link DFL-200 - Security Appliance Manuel utilisateur
D-Link
D-Link NetDefend DFL-260E Manuel utilisateur
D-Link
D-Link DFL-1000 Manuel utilisateur
D-Link
D-Link NetDefend DFL-CP310 Manuel utilisateur
D-Link
D-Link DFL-1000 Manuel utilisateur
D-Link
D-Link DFL-210 - NetDefend - Security Appliance Manuel utilisateur
D-Link
D-Link NetDefend SOHO DFL-160 Manuel utilisateur
D-Link
D-Link DFL-1000 Manuel utilisateur
