D-Link DAP-1320 Instructions de montage

Autres manuels pour DAP-1320

14

Table des matières

Autres manuels D-Link Extenseur

D-Link

D-Link AirPlus G DWL-G710 Manuel utilisateur

D-Link

D-Link AC1200 Manuel utilisateur

D-Link

D-Link DAP-1325 Manuel utilisateur

D-Link

D-Link DCH-M225 Manuel utilisateur

D-Link

D-Link N300 Manuel utilisateur

D-Link

D-Link DAP-1330 Manuel utilisateur

D-Link

D-Link AMPLIFI DAP-1525 Manuel utilisateur

D-Link

D-Link DAP-1955 Manuel utilisateur

D-Link

D-Link DHP-W311AV Manuel utilisateur

D-Link

D-Link DAP-1360 Manuel utilisateur

D-Link

D-Link DAP-1530 Manuel utilisateur

D-Link

D-Link DRA-2060 Manuel

D-Link

D-Link DWL-G800AP Manuel utilisateur

D-Link

D-Link DCH-M225 Manuel utilisateur

D-Link

D-Link DAP-1650 Manuel utilisateur

D-Link

D-Link DAP-1360 Manuel utilisateur

D-Link

D-Link Covr Manuel utilisateur

D-Link

D-Link DHP-W310AV Manuel utilisateur

D-Link

D-Link DCH-M225 Manuel utilisateur

D-Link

D-Link DAP-1620 Manuel utilisateur

D-Link

D-Link DAP-1520 Manuel utilisateur

D-Link

D-Link AirPlus DWL-800AP+ Manuel utilisateur

D-Link

D-Link DAP-1520 Manuel technique

D-Link

D-Link DAP-1950 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

1

How do I setup and install my DAP-1320?

How do I setup and install my DAP-?

The DAP-1320 can be setup by two different methods:

1. Push button WPS (Wi-Fi Protected Setup)

2. Manual

Note: In order to setup the DAP-1320 using WPS, you must have a WPS compatible router/access

point

Push Button WPS

Step 1: Plug in the DAP-1320

Note: The light should turn red and then start blinking orange

Step 2: Press the WPS button on your router/AP

2

How do I setup and install my DAP-1320?

Step 3: Press and hold the WPS button on the DAP-1320 until it starts blinking green and then

release. Once connected, the LED will be solid GREEN.

3

How do I setup and install my DAP-1320?

Step 4: Unplug and place the DAP-1320 approx half way between the router and the desired con-

nection area.

Note: To connect wireless to the DAP-1320, use the Wi-Fi Network Name (SSID) and Wi-Fi Pass-

word information located on your configuration note.-á

Manual Setup

Step 1: Plug in the DAP-1320

Note: The light should turn red and then start blinking orange

4

How do I setup and install my DAP-1320?

Step 2: From a wireless computer/device, scan for available networks and connect to the pre-

defined SSID

(Located on the Companion Card supplied with the DAP-1320 and on the bottom of the DAP-1320)

example: Dlink-6DFC .

5

How do I setup and install my DAP-1320?

Step 3: Open a Web browser and type dlinkap.local.

You will be directed to the d-link setup page. Click next to start the setup.

Step 4: Select the Manual configuration method and click “Next”.

The DAP-1320 will scan for available wireless networks. Select the Wi-Fi network you would like the

DAP-1320 to extend and click “Connect”

Note: If the wireless network you are trying to extend is security enabled, you will be prompted for

the Wi-Fi password.

6

How do I setup and install my DAP-1320?

Step 5: Next you need to create a wireless network name and password for your extended net-

work. It is suggested to configure a name that is different from your "Primary" wireless network.

Click Next

Step 6: Confirm your wireless settings and click save

Setup is now complete. Once the DAP-1320 has applied its settings, its light should be Green and

you should be able to connect to the Extended Wi-Fi Network.