Cypress CA-USBHUT Manuel utilisateur

CA-USBHUT &

CA-USBHU100R

Multi-functioning HDMI/USB/RS-

232 & IR over single CAT5e/6

Transmitter and Receiver

Extender Box

Operation Manual

CA-USBHUT & CA-USBHU100R

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

ﬁre, electrical shock and injury to persons.

 To prevent ﬁre or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide

ventilation.

Revision History

Version No Date Summary of Change

V1 20100701 Preliminary Release

Table of Contents

1. Introduction ……………………..……………………...…........….…….

2. Applications …………………..………………….……...................…..

3. Package Contents ………………………...........……….................…

4. System Requirements ……………..……….........………............…….

5. Features …………………………………………......……........…...……

6. Specications ………………………………...……..........………....….

7. Operation Controls and Functions ……………...……..............……

7.1 Transmitter’s Front Panel ........................................................

7.2 Transmitter’s Rear Panel .……………………..….......…...….…

7.3 Receiver’s Front Panel ............................................................

7.4 Receiver’s Rear Panel .………………...…..…….......…...….…

8. Connection and Installation ….………………….........…..…..…......

9. Acronyms …......................................................................................

1. Introduction

With HDMI & USB over CAT5e/6 connectivity are becoming popular

nowadays. The growing need for their ﬂexibility has likewise risen in demand.

The HDMI & USB over a CAT5e/6 transmitter and receiver box solution is

developed for any household and/or commercial environment. This pair of

devices allows HDMI and or USB host device to send data within a 100-meters

distance while offering expandability for up to 4 USB outputs to perform

tasks. In addition, this pair of devices can also save data from the output

port devices or allow remote control through the display side even when

there's 100 meters apart separating the devices. Furthermore, this pair of

devices includes extra functions like IR, line-out and microphone features that

allows user to enjoy control over distance and audio sound over favor audio

equipments. Moreover, the device allowing user with cascade with the same

family type of device to extend the transmission distance up to as long as it

demand and without signal loss or delay, or with multi pairs of the extender

box up to 16 for matrix usage from a IP for data sharing within the connected

device of sources and displays. The HDMI & USB over a CAT5e/6 transmitter

and receiver box are the ideal choices to your HDMI & USB extension and

data sharing needs.

2. Applications

 HDMI, DVI, RS-232, IR&USB Extender

 Broadcasting system over single CAT5e/6

 Multimedia display and multi-data sharing

 Long distance data sending with cascade

 Matrix network system

 System control over RS-232 and equipment control over IR

 KVM control

3. Package Contents

 HDMI & USB over single CAT5e/6 Transmitter

 HDMI & USB over single CAT5e/6 Receiver

 5V / 2.6ADC power supply x 2

 Operation manual

4. System Requirements

 Input HDMI and or USB source equipment such as DVD, Blue-Ray player

and or PC/Notebook with connection cables.

 Output display such as HD TV, monitor and or PC/Notebook, active

speaker, ampliﬁer and connection cables.

 CAT5e/6 cable up to 100Ms in between of transmitter and receiver.

5. Features

 HDMI v1.3, HDCP v1.1 and DVI v1.0 compliant

 Support USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices

 Operate with USB 2.0 high speed host controllers and USB 1.1 classic hosts

 True plug and play without any driver installation required

 Display and control of the host device and source equipment

 Save and share data into a separate room

 Tested CAT5 cable distance of up to 100 meters or cascade up to as

long it require or link up to 16 pairs for matrix system

 Supports digital display output resolution up to 1920 x 1080@60Hz

 Adopt visually lossless video compression algorithm

 Automatic display mode detection and DDC synchronization

 Support Over-LAN (TCP/IP)

 Simple set up with easy to use

 LED indicators for easy viewing

 Total transmission frequency 1G Hz

6. Specications

Transmitter

Input Port 1 x USB (B type)

1 x HDMI

1 x IR Blaster

1 x RS-232

Output Port 1 x RJ45

Receiver

Input Port 1 x RJ45

Output Ports 4 x USB (A type)

1 x HDMI

1 x RS-232

1 x IR Receiver

1 x 3.5Ø Phone Jack

1 x 3.5Ø Microphone

ESD Protection Human body model: ± 10kV (air-gap discharge)

± 6kV (contact discharge)

Power Supply 5V / 2.6A (US/EU standards, CE/FCC/UL certiﬁed)

Dimensions (mm) 102 (W) x 95 (D) x 25 (H)

Weight(g) 214 / Transmitter, 220 / Receiver

Chassis Material Aluminum

Silkscreen Color Black

Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F

Power Consumption 5W / Transmitter, 12W / Receiver

Relative Humidity 20~90% RH (non condensing)

7. Operation Controls and Functions

7.1 Transmitter’s Front Panel

① ② ③

LINK

POWER

HDMI/USB/IR/RS232 to CAT5e/6 Transmitter

LINK PAIR

SELECT

① Power LED: The red LED will illuminate when the device is connected with

power.

② Link LED: The LED red will illuminate when the device has received input

source single and output display’s data.

③ LINK PAIR SELECT: This dip switch allows user with matrix setting for link up

to 16 pairs of the devices with single IP router. Each pair must have

the same dip switch setting in order to pair to the right device setting. The

factory default setting is at 0000.

7.2 Transmitter’s Rear Panel

① ② ⑥⑤④③

USB INDC 5V CAT5e/6 OUT

HDMI IN

RS 232 IN

BLASTER

① DC 5V: Plug the 5V DC power supply into the unit and connect the

adaptor to AC wall outlet. Power LED will illuminate when the power is on.

② USB IN: This slot is to connect with PC/Notebook for input source signal

with connection cable.

③ CAT5e/6 OUT: This slot is to connect with CAT5e/6 cable with receiver

side’s CAT5e/6 input.

④ HDMI IN: This slot is to connect with input source such as DVD or Blue-Ray

player with connection cable.

⑤ RS 232 IN: This slot is to connect with D-Sub 9pin from PC’s system for

controlling both the input source and output display over RS-232.

⑥ IR BLASTER: This slot is to connect with IR blaster cable included in the

package for IR signal sending and controlling the HDMI input source

equipment.

7.3 Receiver’s Front Panel

① ② ③ ⑤④ ⑥

POWER

LINK

USB

1 2 3 4

CAT5e/6 to HDMI/USB/IR/RS232 Receiver

VIDEO

MODE

① Power LED: The red LED will illuminate when the device is connected with

power.

② Link LED: The LED red will illuminate when the device has received output

display’s single and input source’s data.

③ IR:

④ LINK PAIR SELECT: This dip switch allows user with matrix setting for link up

to 16 pairs of the devices with single IP router. Each pair must have

the same dip switch setting in order to pair to the right device setting. The

factory default setting is at 0000.

⑤ VIDEO MODE: Press this button to switch in between the video and

graphic mode. The OSD will display your selection every time when the

button is pressed.

⑥ USB 1~4: These slots are for users to connect with keyboard, mouse, HDD,

USB ﬂash drive and…etc. for USB hub function and KVM usage.

7.4 Receiver’s Rear Panel

① ② ⑥⑤④③

DC 5V CAT5e/6 IN

RS 232 OUT

AUDIO

IN OUT

HDMI OUT

① DC 5V: Plug the 5V DC power supply into the unit and connect the

adaptor to AC wall outlet. Power LED will illuminate when the power is on.

② RS 232 OUT: This slot is to connect with D-Sub 9pin cable from PC’s system

for controlling both the input source and output display over RS-232.

③ CAT5e/6 IN: This slot is to connect with CAT5e/6 cable with transmitter

side’s CAT5e/6 output

④ AUDIO IN: This slot is for extra audio input source signal to be connected

with 3.5Ø phone jack cable.

⑤ AUDIO OUT: This slot is for external audio output equipment to be

connected with active speaker and connection cable.

⑥ HDMI OUT: This slot is to connect with output display such as HD TV or

monitor with connection cable.

8. Connection and Installation

Blu-ray

DVD

NotebookNotebook

HDMI

PC or

100m

IP Router

TV/MonitorMicrophone Active

Speaker

HDMI

30°

3M 3M

Keybord Mouse HDD Flash

100m

Autres manuels pour CA-USBHUT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cypress Récepteur

Cypress

Cypress CA-HDMI150R Manuel utilisateur

Cypress

Cypress VEX-X1102R-B0C Manuel utilisateur

Cypress

Cypress CH-107 RXN Manuel utilisateur

Cypress

Cypress CA-COMPAT Manuel utilisateur

Cypress

Cypress CA-DVI100R Manuel utilisateur

Cypress

Cypress CHDBR-2HE Manuel utilisateur

Cypress

Cypress CA-DVI250R Manuel utilisateur

Cypress

Cypress CA-COMP50R Manuel utilisateur

Cypress

Cypress CE217646 Manuel utilisateur

Cypress

Cypress MB2146-07-E Manuel utilisateur

Cypress

Cypress COH-Tx1 Manuel utilisateur

Cypress

Cypress CHDBR-2HE Manuel utilisateur

Cypress

Cypress CAC-TXA Manuel utilisateur

Cypress

Cypress CH-515RXPT Manuel utilisateur

Cypress

Cypress COH-Tx Manuel utilisateur

Cypress

Cypress CDL-165PRO Manuel utilisateur

Cypress

Cypress CA-HDMI100R Manuel utilisateur

Cypress

Cypress CA-DVIAT Manuel utilisateur

Cypress

Cypress CH-106TX Manuel utilisateur

Cypress

Cypress CH-106TX Manuel utilisateur

Cypress

Cypress CA-HDMIAT Manuel utilisateur

Cypress

Cypress MB2146-07-E Manuel utilisateur

Cypress

Cypress CWHDI-TX Manuel utilisateur

Cypress

Cypress CAC-TX Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur