CYP CLUX-UCEC Manuel utilisateur
CLUX-UCEC
HDMI CEC Controller
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
V1 01/04/10 Preliminary Release
V2 22/10/10 Added CEC Command Example
VR0 27/06/11 Adding EDID Function
VS1 24/09/12 Updated format/diagrams
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel.........................................2
6.2 Rear Panel .........................................2
7. Software Installation .............................. 3
7.1 Installing the RS-232 Driver................3
7.2 Connecting the Hardware ..............3
7.3 Using the RS-232 Application...........8
9. CEC Operation Code.......................... 15
10. CEC Logical Address......................... 17
11. Connection Diagram ........................ 18
12. Specications .................................... 19
13. Acronyms ........................................... 20
1
1. INTRODUCTION
The HDMI CEC Controller is a convenient USB device allowing users
to control various HDMI devices through their PC. Both sources and
displays can be controlled, either with a PC or remote control. This
device connects to the PC using a mini USB port, allowing plug and
play simplicity and providing power for the device itself, so you don’t
have to deal with any cumbersome power cables.
2. APPLICATIONS
• CEC system remote control over USB for HDMI devices
3. PACKAGE CONTENTS
• HDMI CEC Controller
• User Manual
• Application CD-ROM
4. SYSTEM REQUIREMENTS
HDMI source equipment with output to HDMI display that have a built
in CEC function, HDMI cable, PC or laptop with built in RS-232 software
and USB cables.
5. FEATURES
• HDMI v1.3, HDCP v1.1 & DVI v1.0 compliance
• Supports full CEC functions
• Plug and play
• RS-232 over mini-USB
• Power supplied through the mini-USB port
• Supports EDID bypass
• Compact and stylish design
Note: Drivers and software are compatible with Windows XP
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
CLUX-UCEC
HDMI I /O
1
1
HDMI I/O: Connect to the HDMI/DVI output of your source (i.e.,
DVD player or set-top box) or the input ports of an HDMI/DVi
equipped display using a HDMI or HDMI to DVI adaptor cable.
Note: When connecting to an input source, the other HDMI I/O
must be connected to a display device. You cannot control two
sources or two displays simultaneously.
6.2 Rear Panel
HDMI I /O USB
1 2
1
HDMI I/O: Connect to the HDMI/DVI output of your source (i.e.,
DVD player or set-top box) or the input ports of an HDMI/DVi
equipped display using a HDMI or HDMI to DVI adaptor cable.
Note: When connecting to an input source, the other HDMI I/O
must be connected to a display device. You cannot control two
sources or two displays simultaneously.
2
USB: Connect to a PC/laptop with a mini-USB to USB-A type cable
when control of the source/display devices over RS-232 is required.
Please refer to Section 7 for details. This port provides power for the
device when the connected PC or laptop is turned on. However
when the RS-232 mode is not being used, no power is needed, so it
will bypass the system.
3
7. SOFTWARE INSTALLATION
7.1 Installing the RS-232 Driver
Insert the provided driver CD into your CD-ROM drive, then execute
the FIDIBUS le. Follow the on screen instructions to complete the
installation.
Note: It is not necessary to install this application if users already have
existing RS-232 software installed on their computer.
7.2 Connecting the Hardware
Once the RS-232 driver is installed connect the device to a PC/Laptop
with a mini-USB to USB-A type cable.
Step 1:
Allow the computer to detect the device by following the “found new
hardware” window that will appear. After the hardware has been
successfully detected conrm the detection in Device Manager.
Once the device is successfully connected to the PC, the connection
will be conrmed by the 'Found New Hardware' notication in the
system tray at the bottom right of the screen, as shown in the following
image.
4
A found new hardware wizard will appear on your PC screen.
Choose “No, not this time” and Click “Next” to continue.
Select "Search for the best Driver in these locations" and then Click
“Browse” and navigate to the “USB TO RS232 SOFTWAVE” folder on the
CD-Rom. Click “Next” to continue.
5
Click the “Continue Anyway” button to continue.
Click the “Finish” button to complete this part of the installation. Now
the PC will show “Found New Hardware” for the USB Serial Port. This
means the device has been detected.
Table des matières
Autres manuels CYP Routeur réseau
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité