CYP PRO-H2SDI Manuel utilisateur
PRO-H2SDI
HDMI to 12G-SDI Converter
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2022 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use
to avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2022/02/18 Preliminary release
RDV2 2022/04/27 Updated text in specication section
CONTENTS
1. Introduction..................................................1
2. Applications ..................................................1
3. Package Contents .........................................1
4. System Requirements ..................................1
5. Features.........................................................2
6. Operation Controls and Functions..............3
6.1 Front Panel.............................................................3
6.2 Rear Panel...............................................................4
7. Connection Diagram ....................................5
8. Specications................................................6
8.1 Technical Specications ....................................6
8.2 Video Specications............................................7
8.3 Audio Specications...........................................9
8.3.1 Digital Audio ..............................................9
8.3.2 Analogue Audio........................................9
8.4 Cable Specications ........................................ 10
9. Acronyms.....................................................11
1
1. INTRODUCTION
This HDMI to 12G-SDI Converter allows HDMI signals up to 4K UHD+to be
converted for use in native 12G-SDI video systems. This makes it easier
for professionals to integrate and distribute non-HDCP HDMI signals from
both consumer and prosumer video equipment, such as video cameras
and laptops, within their professional video production environment
while still providing a local HDMI output for monitoring purposes.
Additionally, the inclusion of an analogue stereo input lets users
optionally insert external audio into the SDI output signal along with the
primary video. Basic control is available via front panel buttons.
2. APPLICATIONS
Display HDMI video signals on professional SDI displays
Consumer HDMI to broadcast SDI video signal conversion
4K UHD HDMI signal conversion to 12G SDI
3. PACKAGE CONTENTS
1× HDMI to 12G-SDI Converter
1× 5V/2.6A DC Power Adapter
1× Operation Manual
4. SYSTEM REQUIREMENTS
Non-HDCP HDMI source equipment such as media players, video game
consoles, or set-top boxes.
SDI receiving equipment such as editing/recording decks, professional
studio monitors, or video broadcast equipment.
2
5. FEATURES
HDMI 2.0 and DVI 1.0 compliant
HDCP 1.x and 2.2 compliant
Note: HDCP encoded content can only be output over the HDMI output. The
SDI output will be blocked in the case of HDCP content.
1 HDMI video input & 1 analogue stereo audio input
3 mirrored outputs (2×12G-SDI, 1×HDMI)
Supports up to 4K UHD+(18Gbps, 4K@50/60Hz 4:4:4, 8-bit) digital
video input.
SDI output supports the following SMPTE standards: ST 292-1 Level A,
ST 425-1, ST 2081-10, ST 2082-10
SDI signal extension distance varies based on signal type: 80 meters
(12G-SDI), 100 meters (6G-SDI) 200 meters (3G-SDI), or 260 meters (HD-
SDI)
4K sources can be optionally downscaled to 1080p when output over
the HDMI output to support lower cost local monitoring options
Supports pass-through of LPCM audio (up to 8 channels) from the
HDMI input, or 2 channels from the analogue audio input
Controllable via front panel controls
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
L/R
IN
AUDIOSCALESCALE
SERVICE
HDMI
SDI OUT
L/R
3G 6G 12GHD
PWR
SERVICE
HDCP
SRC. IN
PRO-H2SDI
2
1 3 4 5 6 7 8 9 10
1SERVICE Port: This port is reserved for rmware update use only.
2SDI OUT LEDs: These LEDs will illuminate to indicate the SDI output
format currently in use.
3PWR LED: This LED will illuminate to indicate the unit is on and
receiving power.
4SCALE LED: This LED illuminate when the HDMI output is being
downscaled.
5HDCP SRC LED: This LED will illuminate when the HDMI source
contains an HDCP encoded signal.
6HDCP IN LED: This LED will illuminate to indicate that the HDMI input
supports HDCP sources.
7SERVICE Button: Press this button to put the unit into its rmware
update mode.
Firmware Update Process: To update rmware after pressing the
button, connect the unit to a PC/laptop via the Micro-USB Service
port and the unit will appear as an external drive. Drag an appropriate
rmware le onto this drive and the unit will automatically begin
the update process. After the update completes, the unit will
automatically reboot.
8SCALE Button: Press this button to enable or disable the HDMI
output’s 4K to 1080p downscaling function.
Note: 3840x2160 will be downscaled to 1920x1080. 4096x2160 will
be downscaled to 2048x1080. YUV 4:2:2 format sources cannot be
downscaled.
4
9AUDIO Button & LEDs: Press this button to toggle the audio source
to embed between HDMI audio and analogue audio. The LEDs will
illuminate to indicate which source is currently selected.
10 L/R IN Port: Connect to the analogue stereo output of a device such
as an audio player or PC.
6.2 Rear Panel
HDMI
DC 5V
OUTIN AB
SDI OUT
1 42 3
1HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box. DVI sources are supported with
the use of an HDMI to DVI adapter.
2HDMI OUT Port: Connect to an HDMI TV, monitor, or amplier for
digital video and audio output.
3SDI OUT A~B Ports: Connect to SDI receiving equipment such as
editing/recording decks, professional studio monitors, or video
broadcast equipment.
4DC 5V Port: Plug the 5V DC power adapter into this port and connect
it to an AC wall outlet for power.
5
7. CONNECTION DIAGRAM
HDMI
DC 5V
OUTIN AB
SDI OUT
Monitor
SDI
Output
HDMI
Input
Power
Supply
Pro Video Camera
Table des matières
Autres manuels CYP Convertisseur de média
CYP
CYP CLUX-SDI2HCA Manuel utilisateur
CYP
CYP DCT-15 Manuel utilisateur
CYP
CYP AU-1H1DD-4K22 Manuel utilisateur
CYP
CYP SY-P290 Manuel utilisateur
CYP
CYP CS-802D Manuel utilisateur
CYP
CYP SY-P291 Manuel utilisateur
CYP
CYP nT15IX05 Manuel utilisateur
CYP
CYP AU-22DD Manuel utilisateur
CYP
CYP SY-P293 Manuel utilisateur
CYP
CYP PRO-SDI2H Manuel utilisateur
CYP
CYP CM-388 Manuel utilisateur
CYP
CYP CPT-387 Manuel utilisateur
CYP
CYP CP-251F Manuel utilisateur
CYP
CYP CPLUS-VHHE Manuel utilisateur
CYP
CYP DCT-21 Manuel utilisateur
CYP
CYP CSC-107 Manuel utilisateur
CYP
CYP CV-401D Manuel utilisateur
CYP
CYP CPCD-3A Manuel utilisateur
CYP
CYP nT15FX03 Manuel utilisateur
CYP
CYP CP-1283HDT Manuel utilisateur
