CYP CSR-G6400 Manuel utilisateur
Operation Manual
Operation Manual
6U Rack Chassis (Black)
6U Rack Chassis (White)
CSR-G6400
CSR-G6400-W
DISCLAIMERS
The information in this manual has been carefully checked and is believed
to be accurate. Cypress Technology assumes no responsibility for any
infringements of patents or other rights of third parties which may result from
its use.
Cypress Technology assumes no responsibility for any inaccuracies that
may be contained in this document. Cypress also makes no commitment to
update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express written
permission and consent from Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are trademarks of
the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture
or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings
or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it
is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to
be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings
in the unit housing that provide ventilation and allow for sucient space
for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use to
avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2020/06/23 Preliminary release
CONTENTS
1. Introduction.................................................................... 1
2. Applications ................................................................... 1
3. Package Contents ......................................................... 1
4. System Requirements................................................... 1
5. Features.......................................................................... 2
6. Operation Controls and Functions .............................. 3
6.1 Front and Rear Panels .............................................. 3
6.2 Left and Right Panels ................................................ 3
6.3 Top and Bottom Panels ............................................. 3
6.4 Installation Instructions.............................................. 4
6.4.1 Full/Half-Length Unit Installation ...................... 4
6.4.2 DC Power Manager Unit Installation ................ 6
6.4.3 Network Switch Tray Installation ...................... 9
6.4.4 Cooling Fan System Installation......................11
6.4.5 Cable Management Frame Installation .......... 13
7. Rack Accessories (Optional)...................................... 14
7.1 Network Switch Tray................................................ 14
7.2 Cooling Fan System ................................................ 14
7.3 Cable Management Frame...................................... 14
7.4 DC Power Manager Units........................................ 15
8. Specications .............................................................. 19
8.1 Technical Specications .......................................... 19
1
1. INTRODUCTION
This exible rack-mounting system oers the ability to eciently house up
to 15 professional AV products and is available as a 6U rack chassis. This
storage unit is suitable for customers who require the ecient integration
and mounting of multiple units into a relatively small rack space along with
optional cooling fans and intelligent power control. Each rack chassis is a
standard 19 inches wide. The system allows for the optional inclusion of
up to 2 power supply units, multiple cooling fan units, cable management
frames, and a network switch tray.
2. APPLICATIONS
• Ecient storage of multiple low-prole audio/video units
3. PACKAGE CONTENTS
• 1× 6U Rack Chassis (Black or White)
• 8× M5 Rack Screw
• 4× M3 Screw
• 5× Cable Management Clip
• 1× Cable Management Frame
• 1× Operation Manual
4. SYSTEM REQUIREMENTS
• The 6U rack chassis requires a minimum of 266.7mm (10.5in) contiguous
free space in the rack for mounting. If the optional Network Switch Tray
has been attached, 7U (311.15mm, 12.25in) is required.
• If the Cooling Fan System is installed, an additional 1U space above the
chassis should be left empty to provide space for air to ow freely.
2
5. FEATURES
• Rack chassis with 19 inch width, 6U height, designed for installation into
standard rack cabinets
• A maximum of 15 individual audio/video units may be installed in a single
chassis
• Optional accessories include: DC Power Manager units, Cooling Fan
System, Cable Management Frame, and the Network Switch Tray
• Each optional DC Power Manager unit provides power (5v, 12v, 24v or
48v), remote power control, and power state monitoring for up to 8 devices
plus up to 2 fans. Up so two DC Power Manager units can be installed.
• The dual fans within the optional Cooling Fan System can be temperature
controlled to automatically turn the fan on or o as needed
• Optional Cable Management Frame provides additional options to help
manage audio, video and power cabling from installed units
• Optional Network Switch Tray provides a convenient mounting location for
ancillary equipment such as a network switch or router
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front and Rear Panels
6.2 Left and Right Panels
6.3 Top and Bottom Panels
4
6.4 Installation Instructions
Each rack chassis is shipped fully assembled. Installation of compatible
units only requires the removal of the 2 front locking panels and can be
performed while the chassis is installed in a rack. Installation of the Network
Switch Tray, Cooling Fan System, and DC Power Manager units can be
performed without any disassembly, however access to the top, bottom, and
sides of the rack chassis is required in order to secure them in place so it is
recommended to do so prior to placement within a rack.
6.4.1 Full/Half-Length Unit Installation
STEP 1
Unscrew the 3 thumbscrews holding the top locking panel in place, and
remove the panel from the front of the chassis. Unscrew the 3 thumbscrews
holding the bottom locking panel in place, and remove the panel from the
front of the chassis.
Note: The thumbscrews are connected to the locking panels with a retention
mechanism and will not come completely free when they have been
unscrewed from the chassis.
5
STEP 2
Align and then carefully slide a full or half-length compatible audio/video
unit into the top/bottom grooves of a free slot. Half-length units are designed
with a notch to prevent them from sliding all the way to the back of the rack
chassis. Repeat this step until all units have been installed.
POWER IN HDMI MENU ENTER
-
+
VGA
70M
SERVICE
POWER IN HDMI MENU ENTER
-
+
VGA
70M
SERVICE
Note: If fewer than 15 units are being mounted it is strongly suggested to
leave empty space between units that get particularly warm to improve
airow and heat dissipation.
STEP 3
Reattach the top and bottom locking panels by screwing in the 3
thumbscrews on each until they are tight and secure.
Note: Be careful to not overtighten the thumbscrews as this could damage
the screw threads.
Ce manuel convient aux modèles suivants
1
Table des matières
