Custom Dynamics ProBEAM Dynamic Strips Manuel utilisateur

Quesons? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

We thank you for purchasing the Custom Dynamics® ProBEAM® Dynamic Strips™ LED Turn Signals! Our LEDs oer mainte-

nance free service and higher visibility. Our ProBEAM® product line ulizes the latest technology and automove grade com-

ponents to ensure the highest level of reliable service. Custom Dynamics® oers one of the best warranty programs and cus-

tomer support in the industry. If you have any quesons during the installaon of this product please call us at 1(800) 382-

1388.

Custom Dynamics® ProBEAM®

Dynamic Strips™ LED Turn Signals

Installaon Instrucons

Package Contents:

- ProBEAM® Dynamic Strips™ (pair)

- 4” Black Tie Wraps (8)

- 5/16”x 1-1/4” Buon Head Bolt(4)

- Finished Flat Washer (4)

Fitment: All 2014 -2022 Street Glide Models

(including CVO) and 2014-2022 FLHT Models

Without Driving Light Buckets

Part Numbers:

PB-DS2-14-B (Black)

PB-DS2-14-C (Chrome)

PB-DS2-14-CON (Contrast Cut)

Warning: Disconnect negave baery cable from baery; refer to own-

er’s manual. Failure to do so may result in electrical shock, injury, or re.

Secure negave baery cable away from posive side of baery and all

other posive voltage sources on vehicle.

Safety First: Always wear appropriate safety gear including safety glasses

when performing any electrical work. It is highly recommended that

safety glasses be worn throughout this installaon process. Be sure

vehicle is on level surface, secure and cool.

Cleaning: Take special care in cleaning the nish. Use only a non-

abrasive cleaner and a ne microber cloth to remove dirt or debris.

Never use abrasive polishes or cleaners as these can scratch the nish.

ATTENTION

Please read all Informaon below before Installaon

02-2022

Installaon:

1. Remove the 1/2” nuts that secure the turn signal assembly to the

fork shown in Picture 1. Pull assembly away from the fork to re-

veal the black wiring connector as shown in Picture 2.

2. Unplug the connector by pushing in on the tab located on the male

side of the connecon as shown in Picture 3. Push the tab and pull

apart both sides at the same me. Remove the turn signal assem-

bly from the bike completely.

Installaon Instrucons - Page 2

Quesons? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

05/2021

23. Remove the mounng studs on the fork with a 9/16” wrench or deep well

socket.

4. Repeat steps 1 through 3 on the opposing side turn signal assembly.

5. Plug in the male connector of the of the ProBEAM® Dynamic Strips™ harness

into female connector on the turn signal factory wiring harness.

6. Push the tun signal connectors into the hole in the fork frame

7. Install the ProBEAM® Dynamic Strips™ onto the fork frame and secure with

the provided 5/16” buon head bolts and washers. The LEDs should be on

the boom of the ProBeam® Dynamic Strips™ when mounted to the fork.

Repeat step for the opposing side.

8. Run the 4 way hazard ashers, with the ignion in the o posion, for 3

minutes to sync BCM with the ProBEAM® Dynamic Strips™. Aer you have

sync’d the BCM

9. Check all lighng for proper operaon in all modes.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Custom Dynamics Accessoires pour motos

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Manuel utilisateur

Custom Dynamics

Custom Dynamics Street Magic M109 Manuel utilisateur

Custom Dynamics

Custom Dynamics GEN-SMART-TPU -IND Manuel utilisateur

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Manuel utilisateur

Custom Dynamics

Custom Dynamics Smart Triple Play GEN-SMART-TPU-SS8 Manuel utilisateur

Custom Dynamics

Custom Dynamics Dynamic Strips CD-DS-ST-B Manuel utilisateur

Custom Dynamics

Custom Dynamics CD-RG-V-AW2-B Manuel utilisateur

Custom Dynamics

Custom Dynamics MagicFLEX2 Indian LED War Bonnet Light Kit Manuel de service

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Manuel utilisateur

Custom Dynamics

Custom Dynamics Street Magic Amber Brightsides Guide de configuration

Custom Dynamics

Custom Dynamics ProBEAM PB-SCOUT-RR-BR Manuel utilisateur

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Manuel utilisateur

Custom Dynamics

Custom Dynamics CD-FORK-BCM-AB Manuel utilisateur

Custom Dynamics

Custom Dynamics Street Magic RT Scuff Guard Guide de configuration

Custom Dynamics

Custom Dynamics Road Glide CD-RG-TS-15-B Manuel utilisateur

Custom Dynamics

Custom Dynamics MAGIC STROBES Manuel utilisateur

Custom Dynamics

Custom Dynamics TruWrapz Manuel utilisateur

Custom Dynamics

Custom Dynamics CD-LR-04-R Manuel utilisateur

Custom Dynamics

Custom Dynamics Magic Strobes Manuel utilisateur

Custom Dynamics

Custom Dynamics TruBEAM CDTB-45-AW-3B Manuel utilisateur

Custom Dynamics

Custom Dynamics MAGIC-STROBES-SS6 Manuel utilisateur

Custom Dynamics

Custom Dynamics PROBEAM PB-SS-KIT2 Manuel utilisateur

Manuels Accessoires pour motos populaires d'autres marques

SRC

SRC B-TRK502-01-01-SL Manuel utilisateur

3M Speedglas 9100 MP Manuel utilisateur

hepco & becker

hepco & becker 6307520 00 01 Manuel utilisateur

HOMCOM

HOMCOM AA0-077 Manuel utilisateur

hepco & becker

hepco & becker 6307558 00 01 Manuel utilisateur

Wunderkind Custom

Wunderkind Custom 106503-F15 Guide de l'utilisateur

Dräger

Dräger HPS 3500 Manuel utilisateur

M-WAVE

M-WAVE SKI Manuel utilisateur

Kuryakyn

Kuryakyn 6212 Manuel utilisateur

hepco & becker

hepco & becker 6507504 00 01 Manuel utilisateur

Tool it

Tool it PROMAX LCD 9.13G Manuel utilisateur

Roof

Roof RO200 CARBON Manuel utilisateur

Kabuto

Kabuto Japan IBUKI Manuel utilisateur

PUIG

PUIG 5051 Manuel utilisateur

rizoma

rizoma ZTH050 Manuel utilisateur

Joubert

Joubert 10001711 Manuel utilisateur

Sperian

Sperian Optrel p420 Manuel utilisateur

SW-Motech

SW-Motech SBL.01.971.10000/B Manuel utilisateur