Custom Dynamics MAGIC STROBES Manuel utilisateur

Custom Dynamics® Magic Strobes™ Brake Flasher

Installation Instructions

We thank you for purchasing the Custom Dynamics® Magic Strobes™

Brake Light Flasher! Our products utilize the latest technology and

high quality components to ensure you the most reliable service. We

offer one of the best warranty programs in the industry and we back

our products with excellent customer support, if you have questions

before or during installation of this product please call Custom

Dynamics® at 1(800) 382-1388.

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

10-2017

Part Number: MAGIC-STROBES-HD

Installation

Package Contents:

- Magic Strobes™ Brake Flasher (1)

- Tie Wraps (5)

Fits: 1996-2010 Harley-Davidson® Softail® (Except

Convertible, Rocker and Breakout®), 1997-2011

Dyna®, 1997-2013 Touring (Except 2010-2013 Street

Glide®, Road Glide® Custom), 1999-2003 Sportster®,

2010-2013 TriGlide®, and 2011-2013 Road Glide®

Ultra ATTENTION

Please read all Information below before Installation

Note: When installing the Magic Strobe™ on a 2010-2013

TriGlde®, the Magic-Strobes™ must be installed before the

stock brake-turn module.

Important: Module must be secured after installation. Find

safe area away from any moving parts and out of the way of

normal operation of the bike. Use the enclosed tie-wraps to

secure. Custom Dynamics® is not liable for damage as a

result of improperly securing or failing to secure the module.

Note: When using a Magic Strobes™ with a Smart Signal

Stabilizer™ or other load equalizer we recommend to install

the Magic Strobes™ after (towards the taillight) the Smart

Signal Stabilizer™ or load equalizer. (See Diagram)

Note: When using a Magic Brake Strobes™ with a Non Cus-

tom Dynamics® Run-Brake-Turn Controller, we recommend

the following:

-To flash Brake and turns, Install Magic Strobes™ Before Run

-Brake-Turn Controller. (See Diagram)

-To flash only the center taillight, install Magic Strobes™ After

Run-Brake-Turn Controller. (See Diagram)

Note: Do not Install any Custom Dynamics Magic Strobes™

unit with Custom Dynamics® Smart Triple Play® unit.

Important: Customers using this module with standard incan-

descent bulbs should use patterns 0-3 and 9 only. Any other

settings selected will result in diminished performance.

Caution: A stuck brake switch may cause this unit to over-

heat and fail. Unplug module immediately if this condition

occurs.

Note: Although this device has been designed to significantly in-

crease your braking visibility, flash/strobe patterns may not be street

legal in your area. This device is not DOT approved.

1. Secure motorcycle on level surface.

2. Remove seat or side panel, depending on model.

3. Disconnect negative [ - ] battery cable from the

battery.

4. Locate and unplug the lighting connector to the rear

fender.

5. Plug the Magic Strobes™ module, in-line, into the

rear lighting harness and into the bike’s wiring har-

ness.

6. Re-connect the battery’s negative battery

cable to the negative [ - ] of the battery.

7. Select desired pattern on the dial with power Off.

(See page 2 for Pattern Information)

8. Check operation.

9. To change pattern, turn bike OFF and change dial

to desired pattern.

10. Locate a secure place for the Magic Strobes™ unit

that will not interfere with the secure placement of

the seat. Secure with the enclosed tie-wraps so that

unit will not move.

All manuals and user guides at all-guides.com

Installation Instructions - Page 2

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

10-2017

Flash Pattern Information

Pattern 0: Four Flashes then Solid

Pattern 1: Four Flashes, Solid for 3

Seconds, Repeat

Pattern 2: Seven Flashes then

Solid

Pattern 3: Seven Flashes, Solid for

3 Seconds, Repeat

Pattern 4: Quad Strobe then Solid

for 1 Second then Quad Strobe

Pattern 5: Quad Strobe, Solid for 1 Second,

then Quad Strobe, Solid for 3 Seconds, then

Repeat

Pattern 6: Blaster X Pattern for 3

seconds, then Solid

Pattern 7: Constant Blaster X Pattern

Pattern 8: Constant Fast Strobe 5

Seconds, then Solid

Pattern 9: No Strobe Pattern

Incandescent or LED

LED Only

Incandescent or LED

Module Placement

Smart Signal Stabilizer™

or load Equalizer

Tail Light

Smart Signal Stabilizer™

or load Equalizer

Magic Strobes™

Brake Flasher

Front of Bike

Correct Placement of Magic Strobes™ is after Smart Signal Stabilizer™ or Load

Incorrect installation - Wrong Location

Tail Light

Smart Signal Stabilizer™

or load Equalizer

Magic Strobes™

Brake Flasher

Run-Brake-Turn

Module

Magic Strobes™

Brake Flasher

Run-Brake-Turn

Module Tail Light

Magic Strobes™ Installed Before Run-Brake-Turn Module will strobe Tail and Turn

Magic Strobes™ Installed After Run-Brake-Turn Module will strobe Just Tail Light

Turn Signal

Front of Bike

All manuals and user guides at all-guides.com

Ce manuel convient aux modèles suivants

Autres manuels Custom Dynamics Accessoires pour motos

Custom Dynamics

Custom Dynamics Magic Strobes Manuel utilisateur

Custom Dynamics

Custom Dynamics ProBEAM Dynamic Strips Manuel utilisateur

Custom Dynamics

Custom Dynamics ProBEAM PB-SCOUT-RR-BR Manuel utilisateur

Custom Dynamics

Custom Dynamics GEN-SMART-TPU -IND Manuel utilisateur

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Manuel utilisateur

Custom Dynamics

Custom Dynamics Street Magic M109 Manuel utilisateur

Custom Dynamics

Custom Dynamics CD-FORK-BCM-AB Manuel utilisateur

Custom Dynamics

Custom Dynamics Road Glide CD-RG-TS-15-B Manuel utilisateur

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Manuel utilisateur

Custom Dynamics

Custom Dynamics Smart Triple Play GEN-SMART-TPU-SS8 Manuel utilisateur

Custom Dynamics

Custom Dynamics TruBEAM CDTB-45-AW-3B Manuel utilisateur

Custom Dynamics

Custom Dynamics CD-RG-V-AW2-B Manuel utilisateur

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Manuel utilisateur

Custom Dynamics

Custom Dynamics Street Magic RT Scuff Guard Guide de configuration

Custom Dynamics

Custom Dynamics MagicFLEX2 Indian LED War Bonnet Light Kit Manuel de service

Custom Dynamics

Custom Dynamics Street Magic Amber Brightsides Guide de configuration

Custom Dynamics

Custom Dynamics TruWrapz Manuel utilisateur

Custom Dynamics

Custom Dynamics MAGIC-STROBES-SS6 Manuel utilisateur

Custom Dynamics

Custom Dynamics Dynamic Strips CD-DS-ST-B Manuel utilisateur

Custom Dynamics

Custom Dynamics CD-LR-04-R Manuel utilisateur

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Manuel utilisateur

Custom Dynamics

Custom Dynamics PROBEAM PB-SS-KIT2 Manuel utilisateur

Manuels Accessoires pour motos populaires d'autres marques

SRC

SRC B-TRK502-01-01-SL Manuel utilisateur

3M Speedglas 9100 MP Manuel utilisateur

hepco & becker

hepco & becker 6307520 00 01 Manuel utilisateur

HOMCOM

HOMCOM AA0-077 Manuel utilisateur

hepco & becker

hepco & becker 6307558 00 01 Manuel utilisateur

Wunderkind Custom

Wunderkind Custom 106503-F15 Guide de l'utilisateur

Dräger

Dräger HPS 3500 Manuel utilisateur

M-WAVE

M-WAVE SKI Manuel utilisateur

Kuryakyn

Kuryakyn 6212 Manuel utilisateur

hepco & becker

hepco & becker 6507504 00 01 Manuel utilisateur

Tool it

Tool it PROMAX LCD 9.13G Manuel utilisateur

Roof

Roof RO200 CARBON Manuel utilisateur

Kabuto

Kabuto Japan IBUKI Manuel utilisateur

PUIG

PUIG 5051 Manuel utilisateur

rizoma

rizoma ZTH050 Manuel utilisateur

Joubert

Joubert 10001711 Manuel utilisateur

Sperian

Sperian Optrel p420 Manuel utilisateur

SW-Motech

SW-Motech SBL.01.971.10000/B Manuel utilisateur